Jack Herer & Panama Red In Doc's Hi Brix

[calicanna143]

Hmmm....going back over things a couple things stand out:

1. You only recently corrected your temps. New growth, not old will show the changes. Old growth may improve, but necrotic spots will not.
2. Super Drench is fine for the next feeding, especially if they're scheduled for Transplant. PURE WATER after the Super Drench! (once they need it)
3. I recommend pruning off the lower stuff anyways, now is a good time to do so.
4. They look pretty good overall....going forward please consider going 1.5x on feedings.

Be patient. It's only been a short while since other corrections were made. Now you understand the importance of getting the roots established ASAP, and that's going to help going forward. You're following the DarkScotia journal, right?

I thought I was following his journal, I havnt seen anything from him in a while, can't find anything in my emails. I think your right that this is just leftovers from my previous problem. I will defol a bit more, I already did some a few days ago. Can't wait to start fresh with the next grow.

 

[Doc Bud]

Can't wait to start fresh with the next grow.

This grow is going to reward you bountifully Cali. You'll see, it's going to be amazing. Your problems aren't that bad for starters, and you take action! That's going to pay off.

While I'm super happy and optimistic about your next one, I think you'll be surprised in a few weeks on THIS one.

 

[calicanna143]

Update: did a super drench, also out of 4 panama red I have 3 female, simply amazing..leafs are still dying off, only the panama red are having this issue so hopefully the super drench will fix this. I'm thinking of using the snake oil with tomorrows brix foliar, any thoughts? Hope everyone had a nice Christmas with the family!

 

[Doc Bud]

Update: did a super drench, also out of 4 panama red I have 3 female, simply amazing..leafs are still dying off, only the panama red are having this issue so hopefully the super drench will fix this. I'm thinking of using the snake oil with tomorrows brix foliar, any thoughts? Hope everyone had a nice Christmas with the family!

Hey Cali,

I hope you had a great Christmas!

Don't use the Snake Oil till everything is in balance. What does the new growth look like?

 

[calicanna143]

Hey Cali,

I hope you had a great Christmas!

Don't use the Snake Oil till everything is in balance. What does the new growth look like?

Christmas was great, had 5 days off, first time I've had Christmas off in years. New growth looks good, but in 2 weeks this new growth will be dying out. All other plants are looking good and no problems so I'm thinking its strain related. I will be running this strain a few more times, hopefully I'll have it dialed in. Also I'm picking up a girl scout cookie clone today, kinda excited to see how that does in kit

 

[TheGreenYeti]

Christmas was great, had 5 days off, first time I've had Christmas off in years. New growth looks good, but in 2 weeks this new growth will be dying out. All other plants are looking good and no problems so I'm thinking its strain related. I will be running this strain a few more times, hopefully I'll have it dialed in. Also I'm picking up a girl scout cookie clone today, kinda excited to see how that does in kit

Nice! Which cut of GSC are you getting? Platinum? Forum? Both of the ones I mentioned are fantastic. If it is the forum cut and is the real deal you will end up with black leaves in flower! The worst part of any cookies cut, as you probably know, is the low yield. I will be interested to see what you pick up and how it turns out for you!

 

[calicanna143]

Nice! Which cut of GSC are you getting? Platinum? Forum? Both of the ones I mentioned are fantastic. If it is the forum cut and is the real deal you will end up with black leaves in flower! The worst part of any cookies cut, as you probably know, is the low yield. I will be interested to see what you pick up and how it turns out for you!

I have no idea which cut it is, its coming from midnight farms, which has some nice strains like blue cookies. They also grow their strains and test them to make sure they're the real deal, I guess it will be a surprise.I'm OK with low yield, but not for my whole garden, I'll post pics when I get it

 

[TheGreenYeti]

I have no idea which cut it is, its coming from midnight farms, which has some nice strains like blue cookies. They also grow their strains and test them to make sure they're the real deal, I guess it will be a surprise.I'm OK with low yield, but not for my whole garden, I'll post pics when I get it

I went and looked at their site and it says it is the Og Kush x Cherry Pie cross. It does not say where it came from. I will say the one flowering pic they show looks similar to the forum cut but maybe not as dark. Either way it looks like a nice cut to work with!They carry a couple of other interesting cuts such as the blue zkitlez and do-si-do. I hope it turns out to be a winner for you!

 

[calicanna143]

I went and looked at their site and it says it is the Og Kush x Cherry Pie cross. It does not say where it came from. I will say the one flowering pic they show looks similar to the forum cut but maybe not as dark. Either way it looks like a nice cut to work with!They carry a couple of other interesting cuts such as the blue zkitlez and do-si-do. I hope it turns out to be a winner for you!

I just got back and they were already sold out before I put in my order, I'll just have to do a pre order, the cut is platinum cookies, the guy said its different from what they had last year, the zskittles sounds amazing, I'm going to get those and blue cookies

 

[TheGreenYeti]

I just got back and they were already sold out before I put in my order, I'll just have to do a pre order, the cut is platinum cookies, the guy said its different from what they had last year, the zskittles sounds amazing, I'm going to get those and blue cookies

Nice. I would love to live in a place where I could get killer cuts with ease and without breaking the bank. Oh and not worrying about mites or Pm coming along with them. Most of the clones I can get come from european fem seed stock almost exclusively. The cuts of my own are better than most of what i can get else where IMO. There are some growers growing elite cannabis strains but they typically do not sell cuts or want stupid prices for them.

Twox was telling me about being able to buy legit Purple Urkle cuts for $15, Doc has said his Grape Ape and others go for similar prices. Even if they were wide spread here they would go for at least $20 and if they were not circulated heavily then $100 plus each cut!

 

[calicanna143]

Nice. I would love to live in a place where I could get killer cuts with ease and without breaking the bank. Oh and not worrying about mites or Pm coming along with them. Most of the clones I can get come from european fem seed stock almost exclusively. The cuts of my own are better than most of what i can get else where IMO. There are some growers growing elite cannabis strains but they typically do not sell cuts or want stupid prices for them.

Twox was telling me about being able to buy legit Purple Urkle cuts for $15, Doc has said his Grape Ape and others go for similar prices. Even if they were wide spread here they would go for at least $20 and if they were not circulated heavily then $100 plus each cut!

I get them for 16 bucks usually, but I prefer growing from seed. With these places you don't know if the cut your getting is legit and you run the risk of bugs, any one who puts out thousands of clones like that are going to have bugs. If you ever venture to cali , hit me up and I'll arrange for you to get some good clones. I just talked to someone in Oakland who wants to trade clones, a lot of these small guys prefer trading over selling

 

[TheGreenYeti]

I get them for 16 bucks usually, but I prefer growing from seed. With these places you don't know if the cut your getting is legit and you run the risk of bugs, any one who puts out thousands of clones like that are going to have bugs. If you ever venture to cali , hit me up and I'll arrange for you to get some good clones. I just talked to someone in Oakland who wants to trade clones, a lot of these small guys prefer trading over selling

If I ever make my way that far out I will definitely get ahold of you! I prefer to grow from seed just for the fact it is less risky. There are some clone only strains I would love to get ahold of. The Grape Ape and Purple Urkle being two fo them along with the East Coast Sour Diesel. Those are 3 of the only ones I would consider. Other than that I will run seeds. i need to find a place to do pheno hunts at. Run full packs there and choose keepers for myself. One day it may work out that way I was trying to trade for a Purple Punch cut. I did not want to pay what they wanted for the clone and tried offering up my Pineapple Fields as a trade. They did not go with it so it was whatever.

 

[calicanna143]

I'm so mad.. My temp controller is out of whack.. I go in my room today and I noticed that my high heat control is shut down, so I investigate further and notice that my room controller is reading about 10 degree lower than what the room actually is so it wasn't cooling until way past 80. My shutdown controller triggers at 90. I'm thankful I have safeguards in place, I saved my crop and possible fire. It ended up being the probe connection, hopefully its fixed now

 

[TheGreenYeti]

I'm so mad.. My temp controller is out of whack.. I go in my room today and I noticed that my high heat control is shut down, so I investigate further and notice that my room controller is reading about 10 degree lower than what the room actually is so it wasn't cooling until way past 80. My shutdown controller triggers at 90. I'm thankful I have safeguards in place, I saved my crop and possible fire. It ended up being the probe connection, hopefully its fixed now

What a kick in the bag man! I am glad you caught it before it became catastrophic!

 

[calicanna143]

What a kick in the bag man! I am glad you caught it before it became catastrophic!

You got that right.. I'm soo mad, it seems the powers to be are working against me on this grow, I've never had so many issues. I just accidentally broke the roots on my platinum OG when I watered the one behind it, gonna have to cull it I think, all my clones I took probably won't make it. I've never had a clone not make it... ever!! The stems were so woody the razor blade wouldn't cut through, even on the lower branches and its been 10 days and no roots and they're looking pretty sad. At this point I'll be happy if I get one oz out of this

 

[Doc Bud]

I'm so mad.. My temp controller is out of whack.. I go in my room today and I noticed that my high heat control is shut down, so I investigate further and notice that my room controller is reading about 10 degree lower than what the room actually is so it wasn't cooling until way past 80. My shutdown controller triggers at 90. I'm thankful I have safeguards in place, I saved my crop and possible fire. It ended up being the probe connection, hopefully its fixed now

Aha! Good to know. Perhaps that's part of the issue.

If the plants had high heat and good Destress spray is in order. Ditto the drench recommendation from last post.

 

[TheGreenYeti]

You got that right.. I'm soo mad, it seems the powers to be are working against me on this grow, I've never had so many issues. I just accidentally broke the roots on my platinum OG when I watered the one behind it, gonna have to cull it I think, all my clones I took probably won't make it. I've never had a clone not make it... ever!! The stems were so woody the razor blade wouldn't cut through, even on the lower branches and its been 10 days and no roots and they're looking pretty sad. At this point I'll be happy if I get one oz out of this

How are you cloning? Are you spraying your cuts with 1/2 strength destress while trying to get them to root? I hope things turn around and you start to have some positive results. It sucks when it seems like the universe is conspiring against you. May you get all your issues sorted so you can some out the other end in a better position than you were in before

 

[calicanna143]

Aha! Good to know. Perhaps that's part of the issue.

If the plants had high heat and good Destress spray is in order. Ditto the drench recommendation from last post.

As far as I know, this happened only once last night. I just checked my temp guage and high is 88. Every other time has been 84 for highs. Right now there's a 3 degree difference between my controller and my monitor, I can handle that.

 

[Doc Bud]

As far as I know, this happened only once last night. I just checked my temp guage and high is 88. Every other time has been 84 for highs. Right now there's a 3 degree difference between my controller and my monitor, I can handle that.

haha....I just realize i got your journal mixed up with someone else. Sorry about that.

Also sorry to hear about all those mishaps. Maybe burn some Sage about the place?

 

[calicanna143]

How are you cloning? Are you spraying your cuts with 1/2 strength destress while trying to get them to root? I hope things turn around and you start to have some positive results. It sucks when it seems like the universe is conspiring against you. May you get all your issues sorted so you can some out the other end in a better position than you were in before

I take clones from lower branches with good growth. The razor wouldn't cut through so I had to use very sharp trimming scissors which I've done before no issues. I dip in clonex gel and stick in rapid rooters which were presoaked. Everything is in a humidity dome and sprayed once with destress 1/4 strength. Then lightly misted with RO water twice a day.they are under a 100 watt CFL. I've even stuck clones in a jiffy peet pod in the past and always had roots