TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/HPS

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

I have a bunch of the soft wire I use for training. Works really well.

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

I have a bunch of the soft wire I use for training. Works really well.

Yeah the stuff works great PW, love how easy it is to use. The flexibility comes in very handy too. Great stuff to use to train and hold branches in places.

 

[SwAggNiFiCeNt]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

I have a bunch of the soft wire I use for training. Works really well.

Thanks. Couldn't find a decent size roll on Amazon so I just got a roll of that twist tie stuff. Hope it'll be okay to use.

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Update time - 30/08/17

Just snapped some pics of the girls for you. I haven't done anything to them since my last update. Their growing fast now. Some of them have got so bushy with loads of tops, it's great. Going to have loads of branches to play with to spread out through the netting.

Ordered all my stuff to take some clones today and a few bits for flowering too. Should be here end of the week. Won't be long till we switch these girls to flower now.

I plan on getting the net up over the next 4 or 5 days just waiting for them to get a little more height, their all really low still because of all of the training. Ill then get the net up and make a few more final adjustments to branches and spread them out through the netting. Once I know how it's all looking I'll then take some clones from each plant. I'm thinking two each? I'll give the girls one more light defoliation at same time then give them a few days to recover and start growing up through the netting then I'll switch them over to start flowering.

Group shots first.

Individual shots.

1

2

3

4

5

6

7

8

9

10

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

If you want to clean them up underneath do it before you setup the scrog. Really difficult to do under a net.

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Thanks PW, that's a good idea. I know it's a pain in the arse because I've done it a couple of times now lol. I'll definitely give a tidy up of all leaves which will be getting no light underneath the netting. They grow back so bloody fast anyway!

 

[Slowpuffer]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Update time - 24/08/17

Just got done doing a little bit more lst this evening. Pulled the branches around the sides of pots much lower and now really opened up the middle. Amazing how quickly they start growing back towards the light again after you hold them down. Hopefully won't take the middle to long now to catch up with the sides and I'll then be able to get first layer of scrog up and see how full its looking.

Here's a few pictures of the finished result.

Group shots first.

Individual shots.

1

2

3

4

5

6

7

8

9

10

All those center shoots, would be my clones !! Ha !!

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

All those center shoots, would be my clones !! Ha !!

So many shoots to choose from . Looking forward to trying cloning for the first time.

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Im waiting for a girl i really want to save

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Im waiting for a girl i really want to save

I'm hoping I've got one here !

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Lets hope she turns out fire

 

[Slowpuffer]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

So many shoots to choose from . Looking forward to trying cloning for the first time.

1st. you got to find that special one. it's a pain in the ass to find, and is a lot easier, if you have other folks testing your product. but I know one thing for sure, one of your plants is more potent, than the other 9, and you gotta find it. What I do is start taking smaller colas at about 6.5 weeks, and dry & smoke, one will definitely be more what you're looking for, than the rest. Identify the plant and regenerate it. It's easier than you think, but It's hard to test 10 different plants in like a 2 week window. This is where a smoking pardner comes in handy. And smoking weed before it's flushed is not the most pleasant taste, but it's part of your job, TK. And the only sure way I know to identify potency.

 

[Killerbudz]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Looking good terp

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Update time - 09/09/17

Got a small update for you and some more photos.

On Wednesday evening I gave the girls their final bit of defoliation before I flip them to flower, I also took two clones from each plant at the same time. I went ahead and put up the first layer of scrog net tonight and spread the plants out through it. Pretty chuffed with the canopy. It's sitting at 12/13 inches high from the coco inside the fabric pots. Canopy it's looking pretty bloody level at the moment. Things are looking good, I'll be getting these girls flipped to flower soon, just giving them a few days to recover from Wednesday antics. Exciting times ahead!

Feeding a slightly stronger EC now. My nutrient mix is as follows.

Starting with 60 litres R/O water - 0 PPM

Bio Green X Force Silica - 9ml
Plant Magic Magne/Cal - 32ml 0.3 EC
Advanced Nutrients PH Perfect Micro, Grow & Bloom - 120ml each 1.4 EC
House & Garden Roots Excelurator - 0.3ml litre
Hesi Super Vit - 1 drop 4/5 litres

Final PH 5.8 EC 1.4

I decided to just use rapid rooters to take my clones, I couldn't be bothered to get the aero cloner out this time, I could do with them rooting a bit slower anyway. I used clonex rooting gel and gave them all a spray with clonex mist too. It's been two days now and they don't seem to be looking to bad. Let's hope we can get some roots in 10 to 14 days.

Here's some photos I snapped tonight of the finished scrog and clones.

Group shots first

Individual shots

1

2

3

4

5

6

7

8

9

10

Clones

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Scrog is looking good, very nice flat canopy.

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Scrog is looking good, very nice flat canopy.

Thanks PW! I was rather satisfied with the finished result. Took some serious bending over and a fair bit of time, I'll tell ya that lol. Worth it tho, now a nice big joint of holy grail for the ache in my back lol.

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

My last scrog produced tons of golfball sized nugs. I was real happy with the results

 

[TerpKing]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Now that sounds like a beautiful site PW, got any pictures of that laying around by any chance? Hoping I get me some good buds that's for sure!

 

[Pennywise]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Let me see what i have in my photo vault

 

[Slowpuffer]

Re: TerpKing - Third Grow - Holy Grail Kush DNA Genetics - Coco Smart Pots - 600W MH/

Update time - 09/09/17

Got a small update for you and some more photos.

On Wednesday evening I gave the girls their final bit of defoliation before I flip them to flower, I also took two clones from each plant at the same time. I went ahead and put up the first layer of scrog net tonight and spread the plants out through it. Pretty chuffed with the canopy. It's sitting at 12/13 inches high from the coco inside the fabric pots. Canopy it's looking pretty bloody level at the moment. Things are looking good, I'll be getting these girls flipped to flower soon, just giving them a few days to recover from Wednesday antics. Exciting times ahead!

Feeding a slightly stronger EC now. My nutrient mix is as follows.

Starting with 60 litres R/O water - 0 PPM

Bio Green X Force Silica - 9ml
Plant Magic Magne/Cal - 32ml 0.3 EC
Advanced Nutrients PH Perfect Micro, Grow & Bloom - 120ml each 1.4 EC
House & Garden Roots Excelurator - 0.3ml litre
Hesi Super Vit - 1 drop 4/5 litres

Final PH 5.8 EC 1.4

I decided to just use rapid rooters to take my clones, I couldn't be bothered to get the aero cloner out this time, I could do with them rooting a bit slower anyway. I used clonex rooting gel and gave them all a spray with clonex mist too. It's been two days now and they don't seem to be looking to bad. Let's hope we can get some roots in 10 to 14 days.

Here's some photos I snapped tonight of the finished scrog and clones.

Group shots first

Individual shots

1

2

3

4

5

6

7

8

9

10

Clones

You have a heating mat ? And I mist the inside of the dome, till i remove the dome at about 4-5 days. Looking good on the scrog. I'm to dam lazy for that !! Lol !!