Renegade's Hydro Flux - Featuring TwiLight Group's 432 Watt Spider COB LED

What's up 420 friends and family....

This is what she looks like now...

2014-09-11_18_46_26.jpg


2014-09-11_19_18_11.jpg


2014-09-11_18_46_36.jpg


2014-09-11_19_18_21.jpg


2014-09-11_18_47_04.jpg


2014-09-11_18_48_46.jpg


2014-09-11_18_49_02.jpg


Head count in a min....
 
I want to wait another day or two before re-training for the last time before going vertical but am waiting on LA's input....

2014-09-05_20_26_41_3_.jpg


I need to pull L/R5 and 6 into the center and possibly L1 and R2. Then of course pull R11 and L12 back from the flux arms.

RF2 and LF2 will be the new dominant.
 
Yep you got the plan spot on my friend! :) :)
When starting to manipulate the limbs make sure your going gently at first. I use my thumb nail on inside of kink to create a crease/indent. This aids in not breaking things. Understand that your putting the joins of limbs under really big stress so watch for the join becoming over stressed so it doesn't try ripping itself free. As long as you feel the inner tissue gice way your normally ok to make the big adjustments! :)
 
Light Addict said:
Yep you got the plan spot on my friend! :) :)
When starting to manipulate the limbs make sure your going gently at first. I use my thumb nail on inside of kink to create a crease/indent. This aids in not breaking things. Understand that your putting the joins of limbs under really big stress so watch for the join becoming over stressed so it doesn't try ripping itself free. As long as you feel the inner tissue gice way your normally ok to make the big adjustments! :)
Click to expand...

My Man....

Ok, so tonight is a big night.

First we will trim. I'll let her rest while I figure out exactly which arms we will be pulling in.

In the morning I will attempt the L/R 5 & 6 or 7 & 8. Tomorrow night if all goes well I will pull in L1 and R2. Give her another evening to adjust and Sunday morning I will pull back RF1 and LF1 or 2. That will leave me Sunday evening to pull the heads in place to the squares.

This image is a week old but it does show the correct head count....

2014-09-05_20_26_41_3_.jpg


This image is 3 days old and shows where the flux arms were topped....

2014-09-12_18_16_41.jpg


And this image is just a few mins ago...

2014-09-12_18_18_52.jpg


2014-09-12_18_19_05.jpg


I will post pics at each stage and wait a bit for any input.

Wish me luck...
 
And here she is after some trimming....

2014-09-12_19_06_34.jpg


2014-09-12_19_06_52.jpg


So sticking to the plan, I'll release her from most of her bonds and let her be till morning. I'm going to leave the wires at the flux heads and most of them in the middle that run parallel to the flux arms.

Still thinking on L/R 5 & 6 or 7 & 8 to start....

Input....
 
Whew....Yea me....LOL.

Managed to get the arms bent into the center and only lost 1. Yep, got my cherry pop'd....lost L11...RIP. But we all do it at one time or another and I think I did good to have only lost that one up to this point.

I've released her from all her wire bonds except for the flux heads. I left that one because the non-dom is being held down and didn't want the dom head pulling up on it when the stretch begins. I'll probably leave those wires in place the rest of the way.

So all in all I am very please with this mornings results. I'll begin pulling the rest of the heads down tonight and tomorrow using the same technique you see in the pictures.

And that is my contribution of how to control the height of the heads. I foresee (in my head at least) a nice even canopy top with the Flux heads being above all that.

And now the pics....

2014-09-13_06_49_54.jpg


2014-09-13_06_50_13.jpg


2014-09-13_06_50_38.jpg


2014-09-13_06_50_51.jpg


2014-09-13_06_51_15.jpg



Bring on the comments and suggestions please.....
 
Back
Top Bottom