Doc Bud's High Brix Q&A With Pictures

OK, I have to ask .... Only because the first time I thought it was coincidence - but the second time ?

What's with the shock ??

Thank you to all of the brixers. Ya'll are a class act !
 
Deltatrichs said:
The new formula de-stress . Twice now . Give it a quick shake , grab the cap and pow.
Click to expand...

LOL, yeah, that's typical of the new drenches. :laugh: Kinda startles a loadie, eh?
 
Deltatrichs said:
The way the post order rolled out , it kinda sounds like I was rude to Gazoo . I meant no offense . I was referring to the meticulous way that you switch photo periods.
Click to expand...

NO Offense taken :) did not cross my mind to think it was meant in anyway other than complementary.
However Not an Engineer but a Cal Licensed Manual/CNC Machinist, Engineers are the ones who
design the product, give me the Print and then we get to argue about how they expect me to make
something that's impossible to Machine (how in the heck can I put a hole there)
 
Hey Doc , at one time you kicked around the idea of having a separate 2nd and 3rd run ammendment. Did that ever come about ?

I'm finishing up the first run on the old formula. And all I can say is Wow! I've had a couple of decent organic (non brix) grows . This harvest is going to be truly special. Anyhoo ... I'm rambling.
I'm set for the next run (new 1st run batch) , but will need to order more supplies to recycle the current grow .

Thanks again to all who contribute.
 
Doc Bud - High Brix Q&A With Pictures

Gazoo said:
NO Offense taken :) did not cross my mind to think it was meant in anyway other than complementary.
However Not an Engineer but a Cal Licensed Manual/CNC Machinist, Engineers are the ones who
design the product, give me the Print and then we get to argue about how they expect me to make
something that's impossible to Machine (how in the heck can I put a hole there)
Click to expand...

So your the one of the ones I've been cursing at from a far all these years!?!? Seriously??!! How am I supposed to get that bolt from that location, wtf where they thinking hahaha drops wrench and kicks bucket..... Thanks Gazoo for all your hard work .....
 
Deltatrichs said:
Hey Doc , at one time you kicked around the idea of having a separate 2nd and 3rd run ammendment. Did that ever come about ?

I'm finishing up the first run on the old formula. And all I can say is Wow! I've had a couple of decent organic (non brix) grows . This harvest is going to be truly special. Anyhoo ... I'm rambling.
I'm set for the next run (new 1st run batch) , but will need to order more supplies to recycle the current grow .

Thanks again to all who contribute.
Click to expand...

We've had a third run amendment for a few years now.....
 
Re: Doc Bud - High Brix Q&A With Pictures

Mag7 said:
So your the one of the ones I've been cursing at from a far all these years!?!? Seriously??!! How am I supposed to get that bolt from that location, wtf where they thinking hahaha drops wrench and kicks bucket..... Thanks Gazoo for all your hard work .....
Click to expand...

Try working on a UH-1H Helicopter, I swear they took the turbine engine and built a helicopter
around it. Thing is every bolt on a Helicopter needs to be safety wired in place so the vibration does
not work the bolts loose. Have spent hours removing bolts in impossible to reach spots and then
have to somehow put a safety wire in place, call out the inspector who actually needs a telescopic
mirror to count the amount of twists on the wire pig-tail, pulls his wire cutters and cuts the safety
off saying only 10 twists on the pig-tail you need 12.

EDIT: BTW I only make the parts its the ENGINEER who says
we need a hole here
 
Re: Doc Bud - High Brix Q&A With Pictures

Gazoo said:
Try working on a UH-1H Helicopter, I swear they took the turbine engine and built a helicopter
around it. Thing is every bolt on a Helicopter needs to be safety wired in place so the vibration does
not work the bolts loose. Have spent hours removing bolts in impossible to reach spots and then
have to somehow put a safety wire in place, call out the inspector who actually needs a telescopic
mirror to count the amount of twists on the wire pig-tail, pulls his wire cutters and cuts the safety
off saying only 10 twists on the pig-tail you need 12.

EDIT: BTW I only make the parts its the ENGINEER who says
we need a hole here
Click to expand...

My best bud was an apache mechanic in the Army, talks about that all the time. I'm sure you two could have conversations for dayyyyyys lol
 
Re: Doc Bud - High Brix Q&A With Pictures

Mag7 said:
My best bud was an apache mechanic in the Army, talks about that all the time. I'm sure you two could have conversations for dayyyyyys lol
Click to expand...

Alex I’ll take Army Aviation for a 1000
Question:
Jesus Nut, Hell Hole, Chicken plates ?
Answer:
What are Things on a Helicopter

Some things to remember

It is a bad thing to run out of airspeed, altitude, and ideas all at the same time.

The further you fly into the mountains, the louder the strange engine noises become.

“Pucker Factor” is the formal name of the equation that states the more hairy the situation is,
the more of the seat cushion will be sucked up your ass.
It can be expressed in its mathematical formula of S (suction) + H (height) above ground)
+ I (interest in staying alive) + T (# of tracers coming your way)

There is only one rule in war: When you win, you get to make up the rules.

Thousands of Vietnam Veterans earned medals for bravery every day. A few were even awarded.

Decisions made by someone above you in the chain-of-command will seldom be in your best interest.

No matter what you do, the bullet with your name on it will get you. So, too, can the ones addressed
“To Whom It May Concern”.

Happiness is a belt-fed weapon.

Having all your body parts intact and functioning at the end of the day beats the alternative.
 
Have two plants, same strain, showing Nitrogen toxicity. With the kit are there any particular causes? Last three times it got water was 1/4 trans water and a trans drench then another 1/4 trans water. Spraying Brix with WA10X.
 
BrixNewb said:
Have two plants, same strain, showing Nitrogen toxicity. With the kit are there any particular causes? Last three times it got water was 1/4 trans water and a trans drench then another 1/4 trans water. Spraying Brix with WA10X.
Click to expand...

You're spraying too much, based on what you said in the last 3 pages of your journal. DeStress twice a week plus Brix plus WA. That's too much unless you've got a totally thriving, sprinting monster of a plant. That alone could be your problem.

Remember, I only use SnakeOil (slightly different, but basically the same as WA) once or twice ON CERTAIN STRAINS. I've made that pretty clear, many times. But for some reason many folks seem to take that as meaning "spray every time, twice a week with Snake Oil."

Cut back on the foliars, especially if you've got more than one run on the soil. I think that's your trouble.

Maybe just follow the basic directions:

Foliar Sprays:

Brix: Sprayed every week to 10 days, this product encourages reproductive growth and essential oil and resin production. Brix foliar should not be skipped, even if the plants look perfect. Use 1 oz Brix mixed into a quart of water. Do not store the prepared Brix foliar. Use it up the same day it is mixed.

De-Stress: This product helps plants heal, deal with stress and provides a broad spectrum of trace minerals. This can be sprayed 1-2 times per week when there are signs of plant stress. If the plants look "perfect" there is no reason to spray with De-Stress. Also, mixed at 50% strength it helps high brix clones root much faster. DeStress is mixed at ½ oz per quart of water. DeStress can be saved in the refrigerator for up to 10 days. Always smell it before using if you have stored some.

Use of Foliar Sprays:

Spray Brix and De-Stress 1 time weekly, not on the same day! De-Stress can be sprayed twice a week if the plants continue to exhibit signs of stress. Please note: if the plants are always stressed something else is wrong. Many experienced growers report not needed to use the product at all.

Mix DeStress at 1/2 oz per quart of RO and Brix at 1 oz per quart of RO, using a fine mist try to get the underside of the leaves.
Click to expand...

Every week to 10 days. also note the second to last paragraph: " If the plants are always stressed something else is wrong." I guess I should have said not to keep spraying twice a week when it isn't working.....

On your next run, please post a pic on my journal, saying:

what you did last time (drench, spray, water)
how many days since last drench,spray, water

I'll help you get it right. I'm almost in tears right now thinking your going to actually use bottled nutes......HB is so much better it's just killing me!
 
I think I've only used destress once or twice on this run. Mostly used it for my clones.

I get some pics up later, but I don't think couple of my girls liked the super drench. But still learning, when I run these again they should turn out way better
420-magazine-mobile2065399973.jpg
420-magazine-mobile1002350376.jpg
. Huck kush


Also just about to release some ladybugs, this grow has been aggravating being gone whole time, couldn't get them wiped out. Got predator mites coming too, then gonna drop bunch of foggers when I chop these. Tired of messing with em lol
 
Back
Top Bottom