4inch PVC Aero/NFT 4x5 SCROG - 1200 Watts

Re: 4 inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Hey Nice grow man.

Yea I seen Earls grows and wondered what a screen would do. I agree, I don't think you will get the stretch like you did in soil. maybe get 14 to 16 inches. I think you are right on the money.

You mentioned earlier about roots in the res and having lockout on a previous grow, are they in the res or did you screen them too?​
 
Re: 4 inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Cruzer101 said:
Hey Nice grow man.

Yea I seen Earls grows and wondered what a screen would do. I agree, I don't think you will get the stretch like you did in soil. maybe get 14 to 16 inches. I think you are right on the money.

You mentioned earlier about roots in the res and having lockout on a previous grow, are they in the res or did you screen them too?​
Click to expand...

The roots are not in the res. They are in the pipes.
 
Re: 4inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Nice pics of the stalk. It looks thick and healthy. Oh yes and I'm just itching for college football to come after the lakers won the NBA. Go Canes
 
Re: 4inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

sully007 said:
Have you managed to get together a Parts List. I am gonna give this a try, so expect lots of ???? lol lo
Click to expand...



Page 3 of this thread. But I'll paste it for you.

Parts list
(2) 10' pieces of 4 inch sch40 PVC pipe
(1) 10' piece of 1/2 inch PVC pipe
(3) 1/2" Tees
(2) 1/2" 90* Elbows
(3) 4 inch sch40 PVC endcaps
(1) 8' 2x4 (ripped to make the frame that supports the ends of the tubes)
(3) bags of 14 inch Zipties
(1) 2 inch Hole Saw blade
(1) 4 inch Hole Saw blade
(1) 1/2 inch Hole Saw Blade
(1) 45 Gallon Rubbermaid Roughneck Tote with lid
(1) 30 Gallon Rubbermad Roughneck Tote with lid
(2) Bulkhead fittings(1 for nute res drain and 1 for RO water res outlet)
(1) Garden Hose valve for bottom of nute res
(1) 50' roll of 1/2" vinyl tubing
(1) 100' roll of 1/4" Vinyl tubing
(18) 6mm Rubber Grommets(for 9 plant sites)
(18) 330* Spray Heads(for 9 plant sites)
(1) 7/16" drill bit(for spray sites)
(9) 2" Net Pots(Easy to get on Ebay)
(9) 2" Neoprene inserts(you'll have to buy a bag)
(1) Tube of White Silicone
(1) 1/2"x1/2" compression valve( to release water from the RO res)
(1) 1/4" Float valve(ro res)
(1) 1/2" Float valve(nute res)
(1) Box of Brass Tee's(special order)
(1) Heavy Duty Stand for nute res
(2) rolls of Teflon Tape
(1) Reverse Osmosis Water Unit
(1) 633 GPH Eco Sub Pump
(1) 370 GPH inline pump(to drain nute res)
(1) 500 GPH Danner inline pump(to operate the chiller)
(8) small hose clamps
(1) garden hose
(1) Hydro timer(special order, allows sprayer settings of 5 on and 30 off, etc)
(1) Milwaukee PH Meter
(1) Milwaukee TDS Meter
(1) Milwaukee 4.0 230ml buffer solution(to calibrate my ph meter)
(1) Milwaukee 7.0 230ml buffer solution(to calibrate my ph meter)
(1) Quart PH up
(1) Quart PH down
(1) 1/10 HP Chiller
(1) roll of 4'x50' Mylar
(2) 600 watt HPS units
(1) AN Sensi Grow part A
(1) AN Sensi Grow part B
(1) Conisseur Bloom part A
(1) Conisseur Bloom part B

Of course there will be miscellaneous things such as timers, etc but this will get you REAL close. I'll give advice or help to anyone that decides to copy this unit.

Expect to have $1400 in the unit without the lights.

Make sure to post a link to your build/grow in this thread.
 
Re: 4inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Still looking very nice, not like I expected anything less. Great job they are filling in nicely.
 
Re: 4inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Hey 420fied very nice set up you have here!!! Did you train your plants into the screen any?
 
Re: 4inch PVC Aero/NFT 4x5 SCROG (1200 Watts)

Your burley biotches gonna tear that chump chicken wire up. Throw the switch an let er rip. Can we hear Scotts Brigade Bagpipes while this mayhem perpetrates? Fine cacophony to swing a Claymore by. Might need one to harvest this grow.
 
Back
Top Bottom