I got bubble bags and all that shit, didn't care for 3 types of hash. 1 being junk, 1 being good and one being OK. I decided to try this method for the full melt in one.
Here's how I make it.
Material's needed.
2 buckets 5 gallons, or if doing more then one batch get a big flat bottom garbage can.
Biggest glass maison jar u can find. Or multiple jars works fine too.
Large pyrex pie plate or a large dinner plate. Glass is easiest just make sure its not painted there will be scraping involved.
1/4 inch air line tubing
Silk screening, I use a food strainer that has a fabric strainer, works the same.
A drill with a paint mixing bit, or a food mixer. I've used both same results, but I killed 2 hand mixers in the process of making a half pound of hash lol
Step 1. Fill the first bucket about 1/3 with ice, then fill to 3/4 with cold water. And add a good 2 big hand fulls of trim. I got technical with the process and weighed what I was putting in each bucket or run. Was a half pound wet trim.
Step 2. Now you got everything in the bucket, now mix it for 25 min, lol why 25 min I dunno. Number works for me.
After 5 min it will foam up, this is good. If it don't foam add more ice.
Step 3. Strain it through the silkscreen. No easy way about it, fuckin messy lol squeeze the shit out of the wet trim and get all that foam out, it contains the trichs. Now you got a bucket of brownish green water without hardly any plant matter in it.
Step 4. Put the bucket in a place about waist high, and a place where it won't get bumped or moved. Its critical to keep it still as possible. Let it sit for 3-6 hours, or once you see the water clear up usually no less then 3 hours.
Step 5 get the price of 1/4inch tubing and siphon the water out of the bucket till about 1 inch from the bottom of the bucket. Be gentle and not to disturb the sediment on the bottom, that's the hash!
Swish the bucket around and pour it into the glass jars.
Step 6. Let the jars settle for another hour, then siphon off as much water as u can without disturbing the bottom. Now pour the strange looking shit onto the pie plate and let the water evaporate. A fan on it in a warm area will dry it out in 2 days roughly.
Step 7 scrape the shit off the plate, and press it with your hands, or twist the corner of a bag. If its too hard warm it up and it will become plyable and easily moldable.
I think that's it. Lol