- Thread starter
- #761
Far East Buds
Well-Known Member
Out With The Old In With The New!
So the conversion is done.... Well never is done I am waiting on the new light etc. What I mean is I now have all the plants moved.. Rez's moved.. Fans Etc.. all done... The lights i have are moved into their spots... When I get the new light they all will need to be moved again but good for now. I actually need the new light to help the temps a little. Flower seems to want to stay at 67-68 degrees and down to 60 dark. The room is a lot bigger so the LED's don't put off the heat like the HPS I was using last fall so that explains it. That new LED should fix that. I am playing with a small space heater but meh...
My rez was siphoning to the plants with the pump off so I did the 1/4 inch vent trick and it worked like a charm. I was thinking that was going to be a harder issue to solve.. nope... New room has good Karma already... So let's go take a look at it.
Empty but lines hooked up about to fill the rez.... I ran an RO line to the Rez so I can fill it by opening a valve... Nice Very Handy... I am thinking this barrel will eventually be replaced.. and a bigger RO filter setup would be nice... This 30 takes awhile to fill.. I am sure a 55 would be crazy... I am still running only the 6 for a week or two. I need to do some veg work uppotting as it is over due!
That is a pic of the filter and the hallway... The right wall will have 2 tubs both 2x4. 5-6 more plants will go there under the existing lights. Then the mover and the PS1000 will be in the big area the lights are in now.
Dehumidifer on the right drains directly to waste...
There they are with a good growing area. That PS1000 should rage with the plants growing space. I do think I will stick with 5 in each side when I get the other setup in here up and running... They are crammed a tiny bit more than I like. Running 10-11 total would be sweet!
Last Pic shows the rez.. Fan and the rest of the gear. A very clean almost completely air tight setup. Panda film on the ceiling and some walls. as well as new sheetrock etc. I gained about a foot in this area of vertical grow height but still not as much as i would like. And the mover and new will change all that. But with the mover I can run them much closer to the light. Should be interesting.
The mover does mean i need to figure out how to stabilize heavy branches. I love the Yoyo's So maybe something under the light running full length...attach them to that... Bah i'll figure it out...
So not a lot of individual info this update.. Mostly new room talk... But you can see things so far are so good... Hopefully it stays this way... Clean and producing!
Thanks for checking it out
FE
So the conversion is done.... Well never is done I am waiting on the new light etc. What I mean is I now have all the plants moved.. Rez's moved.. Fans Etc.. all done... The lights i have are moved into their spots... When I get the new light they all will need to be moved again but good for now. I actually need the new light to help the temps a little. Flower seems to want to stay at 67-68 degrees and down to 60 dark. The room is a lot bigger so the LED's don't put off the heat like the HPS I was using last fall so that explains it. That new LED should fix that. I am playing with a small space heater but meh...
My rez was siphoning to the plants with the pump off so I did the 1/4 inch vent trick and it worked like a charm. I was thinking that was going to be a harder issue to solve.. nope... New room has good Karma already... So let's go take a look at it.
Empty but lines hooked up about to fill the rez.... I ran an RO line to the Rez so I can fill it by opening a valve... Nice Very Handy... I am thinking this barrel will eventually be replaced.. and a bigger RO filter setup would be nice... This 30 takes awhile to fill.. I am sure a 55 would be crazy... I am still running only the 6 for a week or two. I need to do some veg work uppotting as it is over due!
That is a pic of the filter and the hallway... The right wall will have 2 tubs both 2x4. 5-6 more plants will go there under the existing lights. Then the mover and the PS1000 will be in the big area the lights are in now.
Dehumidifer on the right drains directly to waste...
There they are with a good growing area. That PS1000 should rage with the plants growing space. I do think I will stick with 5 in each side when I get the other setup in here up and running... They are crammed a tiny bit more than I like. Running 10-11 total would be sweet!
Last Pic shows the rez.. Fan and the rest of the gear. A very clean almost completely air tight setup. Panda film on the ceiling and some walls. as well as new sheetrock etc. I gained about a foot in this area of vertical grow height but still not as much as i would like. And the mover and new will change all that. But with the mover I can run them much closer to the light. Should be interesting.
The mover does mean i need to figure out how to stabilize heavy branches. I love the Yoyo's So maybe something under the light running full length...attach them to that... Bah i'll figure it out...
So not a lot of individual info this update.. Mostly new room talk... But you can see things so far are so good... Hopefully it stays this way... Clean and producing!
Thanks for checking it out
FE