Hempy Headquarters

For the sake of myself trying to understand something I gave the math a go.

VegBloom @4gr/g
8x4x2.64=84.48ppm on the Nitrogen
(5x.43)x4x2.64=22.70ppm for the P
(13x.83)x4x2.64=113.94ppm for the K

Shine @1gr/g
=0 for its N
(22x.43)x1x2.64=24.97ppm for its P
(12x.83)x1x2.64=26.29ppm for its K

Let me know if I screwed it up @FelipeBlu

I understand this is for dry weights only and liquids nutes have specifics. This above numbers are just numbers without the actual analysis there is more to that fertilizer than the NPK. The BE as mentioned above has more than half its P% in sulfur and you wouldn't know that by looking at the front label.

Edit
I found this
shine25.jpg
 
VegBloom @4gr/g
8x4x2.64=84.48ppm on the Nitrogen
(5x.43)x4x2.64=22.70ppm for the P
(13x.83)x4x2.64=113.94ppm for the K

Shine @1gr/g
=0 for its N
(22x.43)x1x2.64=24.97ppm for its P
(12x.83)x1x2.64=26.29ppm for its K

Let me know if I screwed it up @FelipeBlu

I understand this is for dry weights only

PERFECT! :thumb:
 
And the NPK for the combo is 84-48-140 (1.75-1-2.9).

The closest I can come is with 3g/gal MegaCrop V1 and 0.5g/gal Bud Explosion (79-36-159).

The closest I can get with 3g MC V2 is 71-38-175. The K in V2 is just a bit too high to play well with others.
 
Hey Mega Crop Dudes and Dudetts

Gunna try my new clone on it, just a baby still, all alone and lonely

It's MC v2, what should I start it at??
Add calmag?? I'm using RO water
Always use Power Si as well

Graciassssssss
IMG_20190508_160856.jpg
 
I would probably start any clone off at half the recommended dose, which would be 3g/gal in this case, and see how the plant reacts. It is hempy, after all. We can make quick changes just by reformulating and watering again.
:ganjamon:
 
Hey Mega Crop Dudes and Dudetts

Gunna try my new clone on it, just a baby still, all alone and lonely

It's MC v2, what should I start it at??
Add calmag?? I'm using RO water
Always use Power Si as well

Graciassssssss
IMG_20190508_160856.jpg
I've been between 2-3 grams a gallon on a dozen or so clones and it was no issue. Straight MC no additives except ph solutions.

I have made up a 5 gallon of 6gr/gallon and usually drop some of that in a solo cup and mix it up with straight water to cut it in half. Sometimes speed is a virtue since I am a solo grower. It works well since you can use less water and work the clones up in strength with ease.

I have also gave some clones a stronger dose(like 4-5gr/g) and didn't see any ill effects. But this was on a very vigorous cultivar.
 
hello headquarters .. jungle patrol reporting

this report comes from wk 2 of flower. things are going well in the jungle.



full




everyone has less than one square foot of space. over growing the light capability as well. :cheesygrinsmiley:

not one complaint from them tho. once i got a nute schedule dialed they all just got happy and stayed that way. had a grumpy white cookie clone and it even decided to get over it,


full



you can see the old damage lower down. everyone is kicked into starting flower. i was gonna take clones but decided they might be just a bit too far along. bad decision. i had grabbed some just before flip, but fort st veg/clone got carpet bombed, and i may have lost them all. ooops. :straightface: more on that later.


everyone else checks in like this cbdream.


full




that's my single cbdream on this run. really shoulda added some more. may go seed hunting for a cbd plant.

i'm doing a defol in wk 3 coming up soon. they have been actively defol'd thru veg to help keep them a managed size for the space. then leave them alone for another three wks. probably won't be too huge a trim.

staggered the buckets to give them a bit more room.



full




will get a fort st veg/clone report in soon. it's pretty ugly.
 
i was gonna take clones but decided they might be just a bit too far along.

You can take (and root) cuttings well into the flowering phase. Might see some odd leaf growth until they fully revert, but it's no big deal. Treat them as per normal and they'll be fine.
 
hi everyone,

what a great community !!

i will sprout some Damnesia (Strain Hunters) in a week and they will be done in hempy. Sprout medium will be Doc Bud's solo cup recipe with an addtion of Plant Success Great White mycorrhizae and Mammoth will follow it as a inoculater in flowering stage. OC plus will be the only base nute with Vegamatrix Prime Zyme for enzymes.

I'm growing impatience for my first grow, and couldnt stop myself for a quick announcement. All advices are welcome.
 
hi everyone,

what a great community !!

i will sprout some Damnesia (Strain Hunters) in a week and they will be done in hempy. Sprout medium will be Doc Bud's solo cup recipe with an addtion of Plant Success Great White mycorrhizae and Mammoth will follow it as a inoculater in flowering stage. OC plus will be the only base nute with Vegamatrix Prime Zyme for enzymes.

I'm growing impatience for my first grow, and couldnt stop myself for a quick announcement. All advices are welcome.
Good luck. Keep us posted on progress.
 
Doc Bud's solo cup recipe with an addtion of Plant Success Great White mycorrhizae and Mammoth will follow it as a inoculater in flowering stage.

This is an interesting approach - a LOS/hempy hybrid? :nerd-with-glasses:

I’m not positive, but I think the whole myco/microbe scene is more for soil, and will likely be a waste of money in hempy.
:ganjamon:
 
Mammoth manufacturer says it works in hydro. So i think it will be ok in res.

Doc's solo cup is lower half perlite, upper half soil/perlite %50. Its perfect for germination and first grow stage with Great White and Osmo plus. In Doc's ''unlucky queens'' thread plants did not experience any stress after transplant to 10 liter bucket.
 
Just added some more clones to the flowering section. The new additions are Grape Pupil by Mass Medical Strains.
IMG_20190512_180953.jpg
IMG_20190512_181001.jpg
IMG_20190512_181139.jpg


This is 12 tubes total. I will be adding more in a few weeks. I feel like this is a good amount for one light inside my tent. I have plenty of space around each plant for growth and air movement. I plan on a defoliation of all tubes at there 21st day mark of flower respectfully.
 
Just added some more clones to the flowering section. The new additions are Grape Pupil by Mass Medical Strains.
IMG_20190512_180953.jpg
IMG_20190512_181001.jpg
IMG_20190512_181139.jpg


This is 12 tubes total. I will be adding more in a few weeks. I feel like this is a good amount for one light inside my tent. I have plenty of space around each plant for growth and air movement. I plan on a defoliation of all tubes at there 21st day mark of flower respectfully.
I see super healthy girls, good job!!
 
Hello all hempy bucket growers out there! I am just getting my feet wet with hempy while doing some dwc on the side and need some guidance.

I have been getting pretty frustrated with dwc especially during the seedling period as plants are so fragile and dwc is not forgiving at all.

I was given some very large clones this weekend and I moved them to 5 gallon canna coco+perlite mix hempy with a rock base. These clones came in 16 oz Solo cups so they were pretty pissed and root bound. I am not 100% sure how to go about nute feed half way this stage considering how big these are! My buddy uses soil and organic stuff so I can't really translate nute schedule.. I use GHflora trio and calimagic for nutes, RO water and I added some Mykos at root level when I moved them to their hempys.

Obviously the roots are not near the bottom yet so should I water every day or every other day? Its been 2 days and the coco still feels moist at top....

What should ec/ppm be at this stage? First feed I went a bit heavy (1.5ec) based on some quick research that I did since Coco and perlite have no nutrients. Is that too much?

Any help for those out there would be awesome! Here is a pic of my current set up.

ngotb.jpg
 
you have to water 2 or 3 times in a day until roots hit the res.

That seems like a lot. I know coco doesn't hold much but I don't want to over water and drown these roots .

How much water would you do on 5 gallon bucket 2-3 times a day?
 
That seems like a lot. I know coco doesn't hold much but I don't want to over water and drown these roots .

How much water would you do on 5 gallon bucket 2-3 times a day?
im not sure for coco, but for perlite/vermiculite doc bud says 2-3 times till roots hit the res. Do each watering until at least %10 runoff.

you have to mix 1.5 gal feed for 5 gal. if you can, add an enzyme product and superthrieve to the watering.
 
Back
Top Bottom