Could it have been heater?
First Time Growing
- Thread starter PK
- Start date
- Thread starter
- #82
PK
Well-Known Member
I mean that is the only thing that provids heat. I've put my hand under the light for letterly 10 min with heat on and 10 min without heat on and the only thing that was actuly heating my hand was the hot air heat.
Now the heater has a temp sensor built in and the temp is set to 25c
I am just wondering if the heater sensor is broken and it just heat the place up? but than again i been watchign it all day and its been stable at 25c
Now the heater has a temp sensor built in and the temp is set to 25c
I am just wondering if the heater sensor is broken and it just heat the place up? but than again i been watchign it all day and its been stable at 25c
Has the leaves gotten any worse?
- Thread starter
- #84
PK
Well-Known Member
No, looks the same. i did take it off the riser i had it on and put it on the ground so it is a bit further off from the light
Ok cool she’s not going downhill just watch temps closely
jamexican686
Well-Known Member
looks like ur fan is blowing almost directly on your heater try moving it away so its not blowing on the heat source. made that mistake many of times hopefully its that simple.
- Thread starter
- #87
PK
Well-Known Member
So, I removed the heater from the tent today.
current tempratures inside the tent is at 23c with 64% humidity. I have turned down the humidifer and im looking to have it around 45%. im going to leave this until tomorrow to find out what the high and low temps will be.
One thing for sure tho. I can always make the plant happy by given it more heat, but i can't fix a burned leaves.
So, I am wondering if i should top the two branches and cut off the burned leaves on the hydro plant?
current tempratures inside the tent is at 23c with 64% humidity. I have turned down the humidifer and im looking to have it around 45%. im going to leave this until tomorrow to find out what the high and low temps will be.
One thing for sure tho. I can always make the plant happy by given it more heat, but i can't fix a burned leaves.
So, I am wondering if i should top the two branches and cut off the burned leaves on the hydro plant?
Attachments
- Thread starter
- #88
PK
Well-Known Member
Quick update on the soil plants.
These guys are troopers and i think they have forgiven my mistakes. LOL!!
After a massive transplant of removing the wormcasting soil around the roots and replanting them into a mix of ProMix Hp and Wormcasting soil AND topping them all on the same day. I know brutall, but i am thinking it had to be done.
I don't know what the current ppm is inside the soil but i am feeding them the same batch i made which was at 180ppm ph at 6
Also, My extreme tea arrived yesterday. I can't wait for all the organic nutriaon to arrive so i can just give it tab ph-ed water.
These guys are troopers and i think they have forgiven my mistakes. LOL!!
After a massive transplant of removing the wormcasting soil around the roots and replanting them into a mix of ProMix Hp and Wormcasting soil AND topping them all on the same day. I know brutall, but i am thinking it had to be done.
I don't know what the current ppm is inside the soil but i am feeding them the same batch i made which was at 180ppm ph at 6
Also, My extreme tea arrived yesterday. I can't wait for all the organic nutriaon to arrive so i can just give it tab ph-ed water.
Attachments
- Thread starter
- #89
PK
Well-Known Member
@jamexican686 ya, i dont know what it was. I think removing it was a better case since it is almost summer here.
I do have to come up with an idea for winter tho.
- Thread starter
- #90
PK
Well-Known Member
@Pennywise with the heather removed the temps are stable. High 27c low 23c
My concern is the branch. It is not looking good.
My concern is the branch. It is not looking good.
Attachments
jamexican686
Well-Known Member
she looks like she wants more tops, just top her again
The branch should be fine, the affected leaves won’t recover.
- Thread starter
- #93
PK
Well-Known Member
what should i do? i havn't done anything except removing the heater
That’s all you need to do get temps down
- Thread starter
- #95
PK
Well-Known Member
@Pennywise so don't top them and leave it be?
jamexican686
Well-Known Member
if you let It grow wont it put the plant back too far behind the others? with the damaged stem trying to recover and growing weird leaves. I would top it and get a some heat mats if the heater is too much at night. I place mine under my floor in my tent the whole 4x4 floor space.
- Thread starter
- #97
PK
Well-Known Member
@Pennywise should i top both branches. would this make it grow evenly again?
It would give you 4 new branches
- Thread starter
- #99
PK
Well-Known Member
@jamexican686 can you post a picture of your equipment and tent setup.
I am trying to get ideas on how to maximize the space inside of tent while the equipments still do their work.
My tent is 2x2 and if all the equipments are in the tent, than i only have a 1x1floor space for the plant to be in.
1st problem is when the heater is in the tent. it is to close to the plants and even if i turn it so that it dosnt blow against the plant it still gives to much hot heat out.
2nd problem is that the temp sensor of the heater acts up. Hence why the burn.
I am trying to get ideas on how to maximize the space inside of tent while the equipments still do their work.
My tent is 2x2 and if all the equipments are in the tent, than i only have a 1x1floor space for the plant to be in.
1st problem is when the heater is in the tent. it is to close to the plants and even if i turn it so that it dosnt blow against the plant it still gives to much hot heat out.
2nd problem is that the temp sensor of the heater acts up. Hence why the burn.