Hey PK1 nice looking grow you've got going on. Mind if I join in to learn alongside? 
First Time Growing
- Thread starter PK
- Start date
- Thread starter
- #62
- Thread starter
- #63
PK
Well-Known Member
@Pennywise are you around brothaSo, I take i did give it to much nuts again?
the tip of some leaves are showing the same symptoms as the other once.
Suggustions?
Yea you’re feeding way to hot.
RedZedHead
Well-Known Member
they're happy but dark green so too many nutes. I'll be around to help.
just make sure to puff puff pass. ash before you pass.
JWPcinders
Well-Known Member
Youve got Penny here so you are in the right hands!
- Thread starter
- #67
PK
Well-Known Member
I gave them bottle water today. probebly will for the next two rounds.
I just looked at my coke bottles and i noticed that i gave the water mix thats made for hydroponic to the soil plant. both buttles are coke bottle with diff cap color. Not even sure how i made that mistake.
Hydroponic water has a ppm of 335 vs the water batch for soil was at 180 ppm.
The reason i got a mixture of water for the hydroponic is becasue it is in a little container and the water does get used by the plant as well as evaporate.
They should recover ok.
- Thread starter
- #69
PK
Well-Known Member
Thank you for your suggustion @RedZedHeadthey're happy but dark green so too many nutes. I'll be around to help.
I take you are refering to the hydro plant?
- Thread starter
- #70
PK
Well-Known Member
OPS WTF HAPPEND AGAIN! (Britney Spears song)
Crazy how plants go from loving life to hating your gots!!
I got home late last night and past the hell out without checking on the tent. "BIG MISTAKE!! from the birthday boy""
This morning i woke up and after rolling a joint to check on the plants and do my morning rutine, I noticed burns on the hydro plant. "i think its leave burn" becasue my high temp was at 46c. Thats 115 ferenhite
I have a hot.cold adapter and sensor that currently is only used to exhust the hot air once it gets to 30c, but it only has a computer fan. I am thinking i need to connect my AC to push air in once is needed so this dosnt happen again.
Is this correct?
The problem is, Once the adapter gives power to the AC or heater. They wont just turn on.
The power button has to be pressed.
Any ideas how to make this work so i don't wake up to a surprise like this @Pennywise ?
Crazy how plants go from loving life to hating your gots!!
I got home late last night and past the hell out without checking on the tent. "BIG MISTAKE!! from the birthday boy""
This morning i woke up and after rolling a joint to check on the plants and do my morning rutine, I noticed burns on the hydro plant. "i think its leave burn" becasue my high temp was at 46c. Thats 115 ferenhite
I have a hot.cold adapter and sensor that currently is only used to exhust the hot air once it gets to 30c, but it only has a computer fan. I am thinking i need to connect my AC to push air in once is needed so this dosnt happen again.
Is this correct?
The problem is, Once the adapter gives power to the AC or heater. They wont just turn on.
The power button has to be pressed.
Any ideas how to make this work so i don't wake up to a surprise like this @Pennywise ?
Attachments
jamexican686
Well-Known Member
look into the ac infinity inline fan. it has a thermostat connected and you can program it to exhaust at a certain temp when running c02 and completely sealing off your tent. if your not running c02 the passive air is the way to go. with a small intake fan and a large adjustable exhaust fan. That way you can control the negative pressure and use the intake for optimal air changes an minute. In ur set up u can get away with a 4" ac infinty exhaust and a cheapo inline 4" inline duct fan. That being said you really won't be able to keep the tent cooler than the outside temp battling with heat from lights etc. and that's where the AC kicks in. Hope this helps.
Yes you’ll need a blower to deal with that kind of heat.
- Thread starter
- #73
PK
Well-Known Member
I have a carbon filter with a 4" duct fan but i didnt set it up cuz there is no smell yet. But i guess that can work as an heat exhust machine. instead.
I don't know why the heater didnt turn off. Becasue it does have a temp setting which set to 26c and it is currently set in the tent.
I don't know why the heater didnt turn off. Becasue it does have a temp setting which set to 26c and it is currently set in the tent.
How cold does it get without the heater?
- Thread starter
- #75
PK
Well-Known Member
17c, also current temp is at 25 inside and outside of the tent, but becasue of the fan running inside of the tent the temps do fall couple c
jamexican686
Well-Known Member
I hade to fork out a tiny bit n got good ceramic heater that rotates and has a digital thermostat. Bill went up, but no hot spots and a pretty consistent night temp and never gets stuck on!
Attachments
Better a little cold than hot though.
- Thread starter
- #78
PK
Well-Known Member
Should i take the heater out? maybe on a timer for night just to keep it above 20?
That’s ok just it looks like the plants are being cooked during lights on.
- Thread starter
- #80
PK
Well-Known Member
The Led light is at 70cm 27.55" manifactur is calling for 26"-30"
and the intensity is at 60%.
I am so lost on this one on how it happend