- Thread starter
- #861
Glad you figured it out I just put down whatever pops into my stoned head 
ChemDawg D BX 3
- Thread starter PotChimp
- Start date
- Thread starter
- #862
Glad you figured it out I just put down whatever pops into my stoned head
Reps for spontaneity
Damn there's nowhere to click sorry chimp
- Thread starter
- #865
I noticed that new one the other day. Vape bag smiley or something.
Damn I need to get a vaporizer I went from sounding like Froggy from the Little Raskals to Cookie Monster from Sesame Street in a matter of months smokin' does that
Damn I need to get a vaporizer I went from sounding like Froggy from the Little Raskals to Cookie Monster from Sesame Street in a matter of months smokin' does that
I noticed that new one the other day. Vape bag smiley or something.
Damn I need to get a vaporizer I went from sounding like Froggy from the Little Raskals to Cookie Monster from Sesame Street in a matter of months smokin' does that
I have gone to a dome-less glass rig. It is a vaporizer of sorts but hits like a freight train.
Dab to ya- Thread starter
- #867
I'll have to look into it I spent the last two days tweeking my units and I'm almost done. The only thing I have to do is switch a few CFLs and move a few plants. The unit I had the heat stress and light bleach issues got converted to a 400 HPS watt bulb. It's holding 81.7 degrees F at medium-high fan speed, so I'm good. The other unit overheated with the 600 watt HPS, so I expanded the back and now instead of 20" deep, it's 3'. The duct run for the 6" inline fan in there is straight now, so I should have control with the heat there, too. Cool a unit big enough to put plants in front and back of it My Zamal Reunion grow is going in it tonight as soon as I see that I have the heat under control.
I spent the last two days tweeking my units and I'm almost done. The only thing I have to do is switch a few CFLs and move a few plants. The unit I had the heat stress and light bleach issues got converted to a 400 HPS watt bulb. It's holding 81.7 degrees F at medium-high fan speed, so I'm good. The other unit overheated with the 600 watt HPS, so I expanded the back and now instead of 20" deep, it's 3'. The duct run for the 6" inline fan in there is straight now, so I should have control with the heat there, too. Cool a unit big enough to put plants in front and back of it My Zamal Reunion grow is going in it tonight as soon as I see that I have the heat under control.- Thread starter
- #868
The hermied Chem project SCROG, sitting in the corner by itself
In the middle, this:
It's gotta show up on the top buds sooner or later. I think I'm gonna pack this thing in my Stooperlocker and switch this tent back to veg now that I have everything rearranged right. I'll get pics up soon of the moms in the breeding project and my last reveg and clone of the CDDBX3 plant; hope they live. I don't need it to compare my work to anymore, but I like the dope
In the middle, this:
It's gotta show up on the top buds sooner or later. I think I'm gonna pack this thing in my Stooperlocker and switch this tent back to veg now that I have everything rearranged right. I'll get pics up soon of the moms in the breeding project and my last reveg and clone of the CDDBX3 plant; hope they live. I don't need it to compare my work to anymore, but I like the dope
- Thread starter
- #869
Note: I'm still staying with FF minus 1 tsp. from the bases as a feeding schedule for the 4 mother plants, but I just watered tonight with Calmag and Sweet Citrus (I just want to use it up and see what it does for the taste of the smoke). And I am staying with my pick for the mother so far; I'll get pics up soon it's too late and I wanna drink me some tincture and smoke a fatty before I crash out 
- Thread starter
- #870
I looked everywhere on this thing and there's not a nanner in sight:
I know what happened now. That knocks it down to one culprit When I shook the father in my breeding project both times, it poofed and I shut the door fast but it wasn't fast enough. The intake for the air cooled reflector is right above the door I slammed, and it pulled the pollen through. The fan pulling it out of the other side is ducted and goes to another room (the room my other 4 units are in).
The unit I did the pollination in is built in a cellar behind a wall that has a large shelf in front of it. I blocked off most of the wall with plywood to hide the cellar and made a hidden door at the bottom almost as wide as a door and about 15" tall, which I put the large shelf in front of. I push on that bottom space of wall, and it flips upward on a hinge; I slide into the small room on my back under the shelf and stand up after I close the hidden door/wall. Super stealth chimp at your service. Hey, I mentioned before my Uncle was Lancelot Link, what do you expect? There's a closet I built in that cellar to hide, and the passive intake takes the air from the cellar itself. Then to keep the heat from building up in that hidden cellar area, I vent back out to the other room with a flex duct. There's are two vents hidden behind the top of the shelf and that's where the pollen came out. It must have pulled it into the back of my other unit, because I inspected close and saw seeds on the bottom of my Pre '98 too (not sure if you can see it in this pic).
I'm going in to the unit tonight to mist the almost dead father down with water and get it out before it does any more damage. Post more pics soon.
I know what happened now. That knocks it down to one culprit
When I shook the father in my breeding project both times, it poofed and I shut the door fast but it wasn't fast enough. The intake for the air cooled reflector is right above the door I slammed, and it pulled the pollen through. The fan pulling it out of the other side is ducted and goes to another room (the room my other 4 units are in). The unit I did the pollination in is built in a cellar behind a wall that has a large shelf in front of it. I blocked off most of the wall with plywood to hide the cellar and made a hidden door at the bottom almost as wide as a door and about 15" tall, which I put the large shelf in front of. I push on that bottom space of wall, and it flips upward on a hinge; I slide into the small room on my back under the shelf and stand up after I close the hidden door/wall. Super stealth chimp at your service. Hey, I mentioned before my Uncle was Lancelot Link, what do you expect?
There's a closet I built in that cellar to hide, and the passive intake takes the air from the cellar itself. Then to keep the heat from building up in that hidden cellar area, I vent back out to the other room with a flex duct. There's are two vents hidden behind the top of the shelf and that's where the pollen came out. It must have pulled it into the back of my other unit, because I inspected close and saw seeds on the bottom of my Pre '98 too (not sure if you can see it in this pic).
I'm going in to the unit tonight to mist the almost dead father down with water and get it out before it does any more damage. Post more pics soon.
- Thread starter
- #872
Thanks, b.real. That plant was from generation 3 of this project; I like it when I get a plant that gives yield without nugs clustering, so I kept a clone of it. I'm keeping the seeds I get from my Pre '98 S1 that got dusted by ol' Dad too.....
Wow Chimp, that's why every time I think about producing seeds or breeding the thought leaves my mind just as quick as it arrives. The vitality of pollen scares the crap out of me. My grow is confined to my bedroom & I'd hate to see everything lost due to pollination.I know what happened now. That knocks it down to one culprit
- Thread starter
- #874
You grow a male outside to full maturity and there's gonna be people for two miles around whose grow it fug zup, B A R.
I'm glad another 4th generation full pollination isn't going to happen for about two more years here. I'll do air filtration next time.
I'm glad another 4th generation full pollination isn't going to happen for about two more years here. I'll do air filtration next time.
Well at least it is a known male! 
- Thread starter
- #876
Well at least it is a known male!
The only male I've not been disappointed with since I started this venture. It had flowers everywhere. Man, I expected pollen to fall when I gave the plant a light shake it looked like somebody put a firecracker in a small bag of flour $hit went upward and outward and everyward at the same time I freaked and slammed the door
That's it! Case Closed! Debate's over! Sorry Toker69, but I'll never & I mean never ever let a male live past puberty nor produce a seed on purpose on my watch...You grow a male outside to full maturity and there's gonna be people for two miles around whose grow it fug zup, B A R.
I'm glad another 4th generation full pollination isn't going to happen for about two more years here. I'll do air filtration next time.
- Thread starter
- #878
A few buds off the latest dried original Chemdawg D BX 3 clone:
I'm going to watch the next few. Just like my Free Tibet clone I've been running close to the 2 year mark, I think this one may be changing. It may just be the way I grew it but I'll watch. I'm going to get my schedule together and pic the parents tonight, too.
I'm going to watch the next few. Just like my Free Tibet clone I've been running close to the 2 year mark, I think this one may be changing. It may just be the way I grew it but I'll watch. I'm going to get my schedule together and pic the parents tonight, too.
Nice 
- Thread starter
- #880
Thanks CHH. Damn there ain't much of it, though..... 