Barney's Farm - Mimosa X Orange Punch - DWC

Ke0ncp said:
Thanks Bill.

I am mixing in the cal/mag first by adding it and then putting the lids back on the 5 gallon water jugs and inverting them 2 or 3 times. Then in goes the HydroGuard using the same process and finally ph down using the same process.

No base nutes at this stage. Once it hits the res I will wait a week and then add mega crop :)

Good to know on the silicon as well!!
Click to expand...
Silicate can cause issues with nutrients and their uptake.
In a hydro set up it needs to be added first and let the jug sit while you keep stirring.
Once it's all mixed then fill the res tank.



Stay safe
Bill284 😎
 
:Namaste:



Stay safe
Bill284 😎
 
Ke0ncp said:
this is not what I was wanting to see…
Click to expand...
You're worrying that the pH has risen by 2 hundredths of a point over 11 hours? How stable do you expect water to be in an open container?
 
Madtabman said:
Lol I'm stoned. I'm replying to someone else's journal sorry✌️🤪😁😁
Click to expand...
Actually I did the same thing here my apologies.
I was talking to 2 members at once and posted in the wrong thread.
My apologies :Namaste: :Namaste: :Namaste:



Stay safe
Bill284 😎
 
Ok so PH is still climbing:
IMG_4601.png

Water looks fine though :) no foamy bubbles, just the ones I would expect to see on the surface above the airstones
IMG_4600.jpeg



And while I’m not seeing any growth she doesn’t look unhappy

IMG_4599.jpeg

MedScientist said:
I am not sure why you are using Hydrogaurd or Cal/Mag? I would just start 1/4 strength nutes.

Simple is Good!
Click to expand...
Hydroguard to fight off any nasties, though that didn’t seem to help. Cal/mag as its RO. I will go to 1/4 strength nutes after the first week of root(s) in water.
InTheShed said:
You're worrying that the pH has risen by 2 hundredths of a point over 11 hours? How stable do you expect water to be in an open container?
Click to expand...
Maybe I am being paranoid but it’s still climbing. At this rate by this time Saturday it’s going to be out of range and I’m going to have to flush again.

I’m hopeful that there will be a point soon in which it stabilizes.
 
Ke0ncp said:
At this rate by this time Saturday it’s going to be out of range and I’m going to have to flush again.
Click to expand...
Most folks in hydro expect their pH to vary and that's why they keep pH down (and up) on hand. I don't recall anyone dumping the res because it went from 5.6 to 6 over the course of a few days.
 
InTheShed said:
Most folks in hydro expect their pH to vary and that's why they keep pH down (and up) on hand. I don't recall anyone dumping the res because it went from 5.6 to 6 over the course of a few days.
Click to expand...
Fair enough! I do need to get some ph up as well probably in case I see a swing in that direction through this journey :)
 
Ke0ncp said:
Ok so PH is still climbing:
IMG_4601.png

Water looks fine though :) no foamy bubbles, just the ones I would expect to see on the surface above the airstones
IMG_4600.jpeg



And while I’m not seeing any growth she doesn’t look unhappy

IMG_4599.jpeg


Hydroguard to fight off any nasties, though that didn’t seem to help. Cal/mag as its RO. I will go to 1/4 strength nutes after the first week of root(s) in water.

Maybe I am being paranoid but it’s still climbing. At this rate by this time Saturday it’s going to be out of range and I’m going to have to flush again.

I’m hopeful that there will be a point soon in which it stabilizes.
Click to expand...
Keep in mind that the reason you ph the res is so the nutrients will be in the proper range for uptake. No nutes, no reason to ph it.
The nutes will also have their own effect on ph.
 
And when you do have roots and nutes, keep this chart handy. Even experienced hydro growers find it helpful:

full
 
Ke0ncp said:
Ok so PH is still climbing:
IMG_4601.png

Water looks fine though :) no foamy bubbles, just the ones I would expect to see on the surface above the airstones
IMG_4600.jpeg



And while I’m not seeing any growth she doesn’t look unhappy

IMG_4599.jpeg


Hydroguard to fight off any nasties, though that didn’t seem to help. Cal/mag as its RO. I will go to 1/4 strength nutes after the first week of root(s) in water.

Maybe I am being paranoid but it’s still climbing. At this rate by this time Saturday it’s going to be out of range and I’m going to have to flush again.

I’m hopeful that there will be a point soon in which it stabilizes.
Click to expand...
As ppm’s drop I find ph will rise.
Its a common occurrence in a hydro res. :Namaste:
Most people set it low and let it rise.
Then depending on how many ppm’s are left they either adjust with ph down or mix a new batch.



Stay safe
Bill284 😎
 
Melville Hobbes said:
Keep in mind that the reason you ph the res is so the nutrients will be in the proper range for uptake. No nutes, no reason to ph it.
The nutes will also have their own effect on ph.
Click to expand...

Well there is cal/mag in there :) so if the ph is out of the range the cal/mag does no good, or maybe I’m not understanding, which is a very good chance :)

Either way it’s not out of range yet and I can just ph down like Master Shred said :)
 
InTheShed said:
And when you do have roots and nutes, keep this chart handy. Even experienced hydro growers find it helpful:

full
Click to expand...
This chart is great Shred! Thank you for sharing!
Bill284 said:
As ppm’s drop I find ph will rise.
Its a common occurrence in a hydro res. :Namaste:
Most people set it low and let it rise.
Then depending on how many ppm’s are left they either adjust with ph down or mix a new batch.



Stay safe
Bill284 😎
Click to expand...
Thanks Bill! Also good info!
 
Back
Top Bottom