Peyton's Holy Grail Kush - Flux - Hempy - Mars II 400

I've never used a flushing agent before. After kingjhon left that guide on making our own florakleen, I'm going to make and try it this harvest. I usually flush with molasses every other watering, but next round I'll be doing Hempy, and I'm not sure how well molasses will do in Hempy.
 
We were able to get the loupe out and see all the amber trichomes. I'd say they are 25% or more. CHecked about 8 of the tops. Got excited this morning when we saw how many amber trichomes there were. I do see a little bleaching on the two taller ones. Not a lot. That and the trichs made me decide to start flush this morning. Plus the fact I have a small nugget left, just enough for this morning. Depending on weight, I might hold off on oil till Fast and Vast. Seed goes in when this one comes out. Can't wait to see the Fast and Vast.

:woohoo:
WJ

Stumped said:
Hey Jim, did you get the wife to check trich color? Don't start flushing till u see 10 to 20% amber.
Click to expand...
 
I almost forgot!
I'm making some THC ecig juice this weekend, gotta make some oil with some left over trim and a half oz of bud. Then mix it with propaline glycol. I found am recipie on another grow site. Buddy said he adds scents to it so he can vape in public and no one can smell it.
Not going to get heavy into the oil procedure, I've been making oil for 20 years the best way I know how. Alcohol, coffee filters and a hotplate. Cheap and the oil comes out alright. Just a test. If this works like its supposed to, I'll be making oil better in the future following the link in your SIG Jim. Just as easy I just don't have grain alcohol on hand and its quite expensive.
If this works and I can make good oil I might just switch. Tomorrow will be 1 week without a cigarette! I still mix tobacco in my joints, but I've been slowly switching to every other joint with tobacco.
 
Best thing you can do is stop the cig smoking. I did many years ago.

My oldest friend vapes oil, he won't do indica just sativa oils.

I had a friend that used to make tincture with rum. Good stuff sprayed under the tongue. I would like to do shots of that stuff.

If you read the link in my sig you'll find a Polish made grain alcohol that's cheaper than Everclear and it is 2% more alcohol.

I'm hoping I have enough to make 1 oz of oil. But if it's one thing I have , it is patience.

WJ



Stumped said:
I almost forgot!
I'm making some THC ecig juice this weekend, gotta make some oil with some left over trim and a half oz of bud. Then mix it with propaline glycol. I found am recipie on another grow site. Buddy said he adds scents to it so he can vape in public and no one can smell it.
Not going to get heavy into the oil procedure, I've been making oil for 20 years the best way I know how. Alcohol, coffee filters and a hotplate. Cheap and the oil comes out alright. Just a test. If this works like its supposed to, I'll be making oil better in the future following the link in your SIG Jim. Just as easy I just don't have grain alcohol on hand and its quite expensive.
If this works and I can make good oil I might just switch. Tomorrow will be 1 week without a cigarette! I still mix tobacco in my joints, but I've been slowly switching to every other joint with tobacco.
Click to expand...
 
Daily update, SB is still looking symmetrical and stretching like crazy. Her tops aren't as clustered as the HGK, but she's getting there.

HGK is getting bushier and stretching outside the pot now. The tops are clustered up good now so it looks like it's gonna start spitting flowers out. Still waiting for some calyx and hairs to show, but I can be patient
 
Forced to harvest today. Visitors coming. Smelled something last time here. NLxBB Auto 430 Grams on stems. 39 grams popcorn.

Here is before harvest 1
NLxBB_pre_harvest.jpg


#2 turned 90 degrees
NLxBB_pre_harvest_B.jpg


Larger leaves removed
NLxBB_harvest_started.jpg


Took me over three hours. Want to dry one and test it out. Any suggestions?
More photos later

:geek:
WJ
 
Awesome work wildjim! You should dry and get 2 ounces I would imagine. To dry one out, there is a link in that everything to know about marijuana thread that talks about using Tupperware and moist paper towel. It takes a few minutes to do but the bud comes out great that way. Less harsh than drying on toaster oven or light. But damn sites she look tasty. Now I'm excited to see fast n vast.
 
I came back at the right time it would seem. She is looking great mate. Pity about the visitors I'm somewhat of a stickler about a good thorough flush but discretion is key and holds priority over all else IMO. Looking forward to the cured product :)
 
The medicine to be. Hope this stops the seizures. They scared the wife and grandson last night. Worst ones ever.

Buds waiting to be the oil. Popcorn on platter below.
harvested3.jpg


Thanks to everyone that helped with suggestions and support. Especially PeytonManning and Stumped. Thanks for the medical oil recipe the Motoco, get feeling better soon.

:geek:
WJ
 
Glad I could help, even though it was all you this time. I can't wait to harvest, hell, I can't wait to see flowers! I am so jealous of seeing all these beautiful buds and harvests from you and stumped. It sucks to hear about last night, and I hope the oil really takes care of what ails you.

Now, when them fast n vast gonna get popped? I'm ready for the next round
 
One week? That's great Pal. Got to get with straight cannabis. That tobacky weed is bad sh!t. Best thing is, you are trying. I like that.
I'll be making my oil in about 3 weeks.

WJ


Stumped said:
I almost forgot!
I'm making some THC ecig juice this weekend, gotta make some oil with some left over trim and a half oz of bud. Then mix it with propaline glycol. I found am recipie on another grow site. Buddy said he adds scents to it so he can vape in public and no one can smell it.
Not going to get heavy into the oil procedure, I've been making oil for 20 years the best way I know how. Alcohol, coffee filters and a hotplate. Cheap and the oil comes out alright. Just a test. If this works like its supposed to, I'll be making oil better in the future following the link in your SIG Jim. Just as easy I just don't have grain alcohol on hand and its quite expensive.
If this works and I can make good oil I might just switch. Tomorrow will be 1 week without a cigarette! I still mix tobacco in my joints, but I've been slowly switching to every other joint with tobacco.
Click to expand...
 
wildjim said:
The medicine to be. Hope this stops the seizures. They scared the wife and grandson last night. Worst ones ever.

Buds waiting to be the oil. Popcorn on platter below.
harvested3.jpg


Thanks to everyone that helped with suggestions and support. Especially PeytonManning and Stumped. Thanks for the medical oil recipe the Motoco, get feeling better soon.

:geek:
WJ
Click to expand...

Congrats man! Looking like a good amount too!
Hope you feel better real soon bro.
Can you go ahead and make oil from wet weed or does it gotta be dry?
 
Growlo, I was able to use the GH FloraKleen and flush her almost 24 hours. Hopefully that helps.

PM, I am so looking forward to your harvest and the flowers. Yours will be the artwork.

I can't wait to start the F&V. I am planning on Tuesday or Wednesday. Really need the new area and I will vent outside so no odors in the house. The carbon filter I got sucks. Fan is good but next time I don't get a cheap version. Phresh is the way to go. I bought lesser quality on amazon. Should have known name was low baller. Said it was equal to Phresh but not really. If you are going to get one make sure it is a Phresh brand.

WJ


PeytonManning said:
Glad I could help, even though it was all you this time. I can't wait to harvest, hell, I can't wait to see flowers! I am so jealous of seeing all these beautiful buds and harvests from you and stumped. It sucks to hear about last night, and I hope the oil really takes care of what ails you.

Now, when them fast n vast gonna get popped? I'm ready for the next round
Click to expand...
 
Back
Top Bottom