NuttyProfessor And His Herd Of Indigenous Microorganisms
- Thread starter NuttyProfessor
- Start date
Hey, that's cleavers! I can use that as compost for teas?
- Thread starter
- #923
Some other good plants to include in a general ‘weed’ based liquid fertilizer include: this is from a organic fert page
hope it helps - alfalfa (for nitrogen and iron).
- arrowroot (for calcium).
- bracken (for a range of nutrients).
- burdock ( for iron).
- chamomile ( for calcium, potassium and phosphorus).
- chickweed (for potassium, phosphorus and manganese).
- cleavers (for sodium and calcium).
- coltsfoot (for a range of nutrients).
- docks (Rumex ssp.) (for calcium, potassium, phosphorus, iron).
- lamb’s quarter (for NPK, calcium and manganese).
- plantains (for a range of nutrients).
- purslane (for calcium, potassium and iron).
- sow thistle (for magnesium, phosphorus and copper).
- tansy (for phosphorus).
- watercress (for a range of nutrients).
- Thread starter
- #924
Best way of putting people off sniffing out your bud hahaaaa...or spread it around a bit more...
Surprised dill didn't make the list. That's another good one.Some other good plants to include in a general ‘weed’ based liquid fertilizer include: this is from a organic fert page
- alfalfa (for nitrogen and iron).
- arrowroot (for calcium).
- bracken (for a range of nutrients).
- burdock ( for iron).
- chamomile ( for calcium, potassium and phosphorus).
- chickweed (for potassium, phosphorus and manganese).
- cleavers (for sodium and calcium).
- coltsfoot (for a range of nutrients).
- docks (Rumex ssp.) (for calcium, potassium, phosphorus, iron).
- lamb’s quarter (for NPK, calcium and manganese).
- plantains (for a range of nutrients).
- purslane (for calcium, potassium and iron).
- sow thistle (for magnesium, phosphorus and copper).
- tansy (for phosphorus).
- watercress (for a range of nutrients).
I have literal metric fuckloads of lamb's quarters, cleavers, dock, and purslain. ily Nutty <3Some other good plants to include in a general ‘weed’ based liquid fertilizer include: this is from a organic fert page
- alfalfa (for nitrogen and iron).
- arrowroot (for calcium).
- bracken (for a range of nutrients).
- burdock ( for iron).
- chamomile ( for calcium, potassium and phosphorus).
- chickweed (for potassium, phosphorus and manganese).
- cleavers (for sodium and calcium).
- coltsfoot (for a range of nutrients).
- docks (Rumex ssp.) (for calcium, potassium, phosphorus, iron).
- lamb’s quarter (for NPK, calcium and manganese).
- plantains (for a range of nutrients).
- purslane (for calcium, potassium and iron).
- sow thistle (for magnesium, phosphorus and copper).
- tansy (for phosphorus).
- watercress (for a range of nutrients).
- Thread starter
- #928
The plant turned out to be Poison Hemlock , got it out by the roots, thankfully I asked on the boards , me about to compost it too and make teas . I would wake up dead in the morning
So it WAS a carrot!The plant turned out to be Poison Hemlock , got it out by the roots, thankfully I asked on the boards , me about to compost it too and make teas . I would wake up dead in the morning
Hey Nutty you know bokashi prolly: can I use besides wheat bran to do the final LB culture? I have brown rice flour in quantity.
Hayron1088
Well-Known Member
Ok I think I’m about to be the first stupid question in your thread. So if I source my own plant life in my area, throw them in a barrel of proper water and let it ferment for lack of a better word? Or could I gather the same plant life and make a compost tea? If so on the compost tea, I’d love to hear your opinion on it while using dry amendmentsSome other good plants to include in a general ‘weed’ based liquid fertilizer include: this is from a organic fert page
- alfalfa (for nitrogen and iron).
- arrowroot (for calcium).
- bracken (for a range of nutrients).
- burdock ( for iron).
- chamomile ( for calcium, potassium and phosphorus).
- chickweed (for potassium, phosphorus and manganese).
- cleavers (for sodium and calcium).
- coltsfoot (for a range of nutrients).
- docks (Rumex ssp.) (for calcium, potassium, phosphorus, iron).
- lamb’s quarter (for NPK, calcium and manganese).
- plantains (for a range of nutrients).
- purslane (for calcium, potassium and iron).
- sow thistle (for magnesium, phosphorus and copper).
- tansy (for phosphorus).
- watercress (for a range of nutrients).
- Thread starter
- #931
What you do is , 3/4 fill a barrel , throw in your weeds , add a hand full of leaf mold stir , close the lid , in the warmer weather a few weeks will break the plants down quicker . the leaf mold is the key ingredient because you want Indigenous microorganisms, so if you collect from a wooden area that's old the microbes are already working togetherOk I think I’m about to be the first stupid question in your thread. So if I source my own plant life in my area, throw them in a barrel of proper water and let it ferment for lack of a better word? Or could I gather the same plant life and make a compost tea? If so on the compost tea, I’d love to hear your opinion on it while using dry amendments
Indigenous microorganisms are defined as: “A group of innate microbial consortium that inhabits the soil and the surfaces of all living things inside and outside which have the potentiality in biodegradation, bioleaching, bio-composting, nitrogen fixation, improving soil fertility and as well in the production of plant growth hormones .”
- Thread starter
- #932
Have never used or tried bokashi , I have seen a video or two but remember nothing about it , ill get into it though
.- Thread starter
- #933
Making a microbe tea is very easy also, rain water , leaf mold good leaf mold this is the key to successful microbes ,
fill a bucket with rain water , add leaf mold and boiled potato , the potato is microbe food , this is jadam Microbe solution the ph should be neutral and not as low as sugar of molasses @Hayron1088
fill a bucket with rain water , add leaf mold and boiled potato , the potato is microbe food , this is jadam Microbe solution the ph should be neutral and not as low as sugar of molasses @Hayron1088
- Thread starter
- #934
The next lot , still waiting on the gorilla glue, I really hope it comes up as there is a story behind it
Bought a moisture probe and it does read wet and dry lol
@Listersmeghead the barrel looks like this now
The rest
BIG CHEESE SPEC @Weed Seeds Express
Gelato Specs
b
Bought a moisture probe and it does read wet and dry lol
@Listersmeghead the barrel looks like this now
The rest
BIG CHEESE SPEC @Weed Seeds Express
Specifications Big Cheese autoflowering feminized seeds
| THC level | 17% |
| CBD level | 0.8% |
| Variety | 40% Indica / 40% Sativa / 20% ruderalis |
| Genetics | Cheese x Ruderalis |
| Max yield indoor | 150 to 250 grams/m2 |
| Max yield outdoor | 250 to 350 grams/m2 |
| Height indoor | 70 to 100 cm |
| Height outdoor | 80 to 120 cm |
| Flowering time | 70 to 77 days |
| Fungal Resistance | Low |
| Growersprofile | Moderate |
| Cultivation | Outdoor, Greenhouse, Indoor |
| Climate | Mediterranean, Arid, Temperate |
| Flavors | Cheese, Earthy, Skunk |
Gelato Specs
Specifications Gelato autoflowering seeds
| THC level | 21% |
| CBD level | 0.04% |
| CBG Level | 0.02% |
| Variety | 40% Indica / 40% Sativa / 20% ruderalis |
| Genetics | Sunset Sherbet x Girl Scout Cookies x Rudelari |
| Max yield indoor | 400 to 500 grams/m2 |
| Max yield outdoor | 600 to 900 grams/m2 |
| Height indoor | 90 to 120 cm |
| Height outdoor | 120 to 160 cm |
| Flowering time | 56 to 70 days |
| Fungal Resistance | High |
| Growersprofile | Beginner |
| Cultivation | Indoor, Outdoor, Greenhouse |
| Climate | Temperate, Mediterranean, Arid, Mountains |
| Flavors | Fruity, Kush, Sweet, Tropical |
| Effects | Creative, Euphoric, Happy, Hungry, Relaxed |
| SOG suitable | yes |
| SCROG suitable | yes |
b
Listersmeghead
Well-Known Member
Morning prof.
The froth on that barrel is insane nutty,it looks like the head on a pint of best.
Your plants are looking nice and clean with the tops dressed, is it keeping the mites in check?
The froth on that barrel is insane nutty,it looks like the head on a pint of best.
Your plants are looking nice and clean with the tops dressed, is it keeping the mites in check?
Listersmeghead
Well-Known Member
Me and the young lad started a little bucket, just builders bucket size for now. Just some dandelion from the garden and some water, I'm gonna get some leaf mold and boil a potato. That should give him an idea and start a process off.
I was looking at the seaweed down at the beach yesterday and I've come to the conclusion I know nothing about seaweed
. So I'm gonna have a read up today.
It's a beautiful day out nutty, hope you're having a good one buddy.
I was looking at the seaweed down at the beach yesterday and I've come to the conclusion I know nothing about seaweed
. So I'm gonna have a read up today.It's a beautiful day out nutty, hope you're having a good one buddy.
- Thread starter
- #937
Morning , I haven't heard that from I lived in Kilburn London, a pint of courage best , I think it was that brand , just got a blast from the past there ,
Haven't seen more damage , seems to be doing the trick ,
- Thread starter
- #938
Yes it was , you win a nutty hug too
Listersmeghead
Well-Known Member
That's the one, but i think most breweries have their version.
I remember the strong Irish communities in London way back, shepherds Bush was another area, I remember as kid going into the pubs and the smell of the cabbage and bacon cooking.
That should work. I think you just need a dry substrate with the right consistency. I used dry sawdust and it worked fine for bokashi.