My new grow space

Guy Cavallero said:
You know what brother......i made one too...earlier on. A bigger one. I followed an idea and it came out pretty good. Turned out to be too big to easily get around and just as expensive to build as the one I purchased. If it were me, I'd order one in a heartbeat over a built one...... and Im handy lol. If you do decide to do a spray head type, over a pump style.....get a bigger pump for sure if using 1/2"cpvc pipe, like 200-300gph for sure. Or run your spray head lines directly off a small 60-70gph pump with smaller diameter hose like 1/4"......i just had early pressure issues, that seemed like a good fix.
Click to expand...
Thanks Guy! This is what I bought for this setup. Yea struggling to determine pump size. These sprinklers fit on a small hose I don't know how many to put on either...I'm trying I'm just not that preplanned and don't have the cash for my trial and fix method I normally implement lol. Here's what I have. I'd like to make a 10-15 cloning station. Any suggestions please share! I'll review ur build, I've been hanging out here watching many of your things. I was looking at your electrical too. Right now my current load fills all my circuits so I want to run a box just for my room. I couldn't find those electrical timers and posts about that which were here before. Do you remember what pg that was on? Lol. Thank you Guy!
10/03/18

10/03/18

Clone build equip
 
Guy Cavallero said:
Wait a minute, that's pretty sick..... so your permit allows you to fly internationally with marijuana in your carry-on? That doesn't seem right but it seems pretty awesome all at the same time lol.

The expired permit has to be still okay, it's only due to backlog that I'm sure this is happening.

Lowded are you in Ontario...do you need clones?
Click to expand...


Not internationally... you can potentially get into a lot of shit trying that.

I was reading about taking weed with you in Canada thru airport. The suggestion was to be up front and tell the inspector or whatever they call it that you have weed.. they are supposed to call the police and the police check for valid permit and good to go. Just what I read... I have no experience and would never import weed or drive fly swim... or boat with it!

Congrats on your permit.. that's awesome. I own a property in Ca but don't have a Canadian ID... I wonder if I could get a growers permit in Ontario even tho I'm not a citizen??

Man guy your grow looks awesome... wont be long till harvest?

Edit: Oh hey Guy - your link in your sig to this journal - take a look at it.....
 
Sorry everyone, been a rough couple of weeks. My friend Z is hospitalized now....

Thanks @bobrown14, day 39 of flower for my adults. They're looking good so far. Different suggestions on the lengths of flower, so I'll be keeping watch. Things sure smell wicked in there. Round 2, my girls who are 11 days in.....are already much larger than my adults in LST. I'm learning so much as I go...even now. I've noticed that due to external temperatures my inside temps are getting down to 16-17°C at night and up to 25-26°C during daytime. The cooler temperatures are surely helping trichomes development, just hope it's not hurting growth.

Not sure on the out of country license. Your obviously an American citizen, but own property here then? International flight seemed to good to be true.....WOW eh?

You'd be proud of me too.....Stank has helped me along the way with duplicating his soil & two weeks ago I gathered my last Ingredients and mixed my LOS. No need to post a soil picture, but I'm super excited for my cook to end and my soil to be viable for use.
 
Lowded118 said:
Thanks Guy! This is what I bought for this setup. Yea struggling to determine pump size. These sprinklers fit on a small hose I don't know how many to put on either...I'm trying I'm just not that preplanned and don't have the cash for my trial and fix method I normally implement lol. Here's what I have. I'd like to make a 10-15 cloning station. Any suggestions please share! I'll review ur build, I've been hanging out here watching many of your things. I was looking at your electrical too. Right now my current load fills all my circuits so I want to run a box just for my room. I couldn't find those electrical timers and posts about that which were here before. Do you remember what pg that was on? Lol. Thank you Guy!
10/03/18

10/03/18

Clone build equip
Click to expand...
Lowded I'd suggest you try to find a manifold or fitting to immediately reduce the outlet down to 1/4", if you do that.....the smaller 50-60 gallon pump will be fine I'm thinking. Those smaller spray heads were what I tried. I had 8 in a 22"×16" Rubbermaid.
 
With the recent events surrounding my friend, I thought that bringing up the arrival of her MB2 machine might have been a bit cold. Since my friend Z is not getting out of the hospital, and this machine was donated to her from a very generous member.......that member and I have collectively decided that her machine will be donated 1 last time to someone who is truly deserving. @GrowtoHealme was the one who stuck her neck out into the middle of an ongoing member of the month contest to ask for some help with my friend. Although the decision to do that was bold and was met with some criticism, she ultimately succeeded and got a machine donated.

Lady G this one's for you.
15209446033881774533437.jpg

15209446033881774533437.jpg

Thank you for everything you've done for my friend. We're all better people due to your time and generosity......way beyond anything imaginable.

Dabs, the MB2 that you donated to me has already been put to good use....
20180310_114550.jpg

20180310_114550.jpg


20180310_133302.jpg

20180310_133302.jpg


. I have made THC capsules (left) for Zena and I have also made CBD capsules (right) for some friends of the family and my family members.

Huge shout out to the members of 420 magazine, you guys are my family, you guys are the best..... I couldn't do it without your help and support.

Grow journal update tonight.
 
That's awesome Guy.. generosity... pass it side to side.. it comes back X10 in ways you never imagine or expect.

Wait.. you can make dabs with the MB machine???
 
bobrown14 said:
That's awesome Guy.. generosity... pass it side to side.. it comes back X10 in ways you never imagine or expect.

Wait.. you can make dabs with the MB machine???
Click to expand...
No it doesnt. Itll do oils, butters and tinctures from decarbed bud. Quite a genious little machine though, wicked timesaver and intended solely for this purpose. Im completely stoked to finally have one. Im sure G2 will put hers to good use too.

Thanks for popping in brother.....give me a ding when u hit the property up here. I'll have a baggy with your name on it.
 
So tonight I was going to do the 2nd half of my flower room picture downloads but my pics were all taken sideways. I wish that their was a couple of things in the new media download area. I wish once pictures were downloaded, that they could be edited or at least oriented better and I wish that I could access an album that was created yesterday and add new pictures to it.

I'll have to.leave more time tomorrow evening for a complete update, but really the only issue is with my 2nd attempt at DWC. My Crown Royale that I'm trying g has shown signs of stunted growth and now potential.lockout. This is my own fault by trying to push a small plant too hard too early in her life. Now she's being flushed with plain 5.7 H2O and CalMag. @Rider509 or @Scrogdawg any help on where to go with her? Not sure why her photo is sideways??
20180312_175402.jpg

20180312_175402.jpg


Also, I'm bagged and my eyes are struggling to stay open so here is a shot across my field of green in Veg........things are looking great. Trying to control heights and node spacing for Flower phase and learn as I go.
20180312_175901.jpg

20180312_175901.jpg



Goodnight 420....be safe!
 
Anyone have any suggestions on my flush in DWC?
 
Guy Cavallero said:
So tonight I was going to do the 2nd half of my flower room picture downloads but my pics were all taken sideways. I wish that their was a couple of things in the new media download area. I wish once pictures were downloaded, that they could be edited or at least oriented better and I wish that I could access an album that was created yesterday and add new pictures to it.

I'll have to.leave more time tomorrow evening for a complete update, but really the only issue is with my 2nd attempt at DWC. My Crown Royale that I'm trying g has shown signs of stunted growth and now potential.lockout. This is my own fault by trying to push a small plant too hard too early in her life. Now she's being flushed with plain 5.7 H2O and CalMag. @Rider509 or @Scrogdawg any help on where to go with her? Not sure why her photo is sideways??
20180312_175402.jpg

20180312_175402.jpg


Also, I'm bagged and my eyes are struggling to stay open so here is a shot across my field of green in Veg........things are looking great. Trying to control heights and node spacing for Flower phase and learn as I go.
20180312_175901.jpg

20180312_175901.jpg



Goodnight 420....be safe!
Click to expand...
Guy if you go into your gallery you can edit pictures by pressing on the 3 vertical dots.
 
Guy Cavallero said:
Sooooo.....update time.

My cloning and seedling area.
I figured I would first start off by showing what I do to the bottom of my Solo cups to Aid in drainage. Pretty simple, take an exacto knife and cut three or four corners off the bottom of the cup to allow for water to drain.
20180307_162101.jpg

20180307_162101.jpg

How I drain my solos!
Next a group shot of my potted clones. Just potted more up tonight.
20180307_164538.jpg

20180307_164538.jpg

My clone army!
And my cloner..... I am definitely finding that the Clones root better and have a much better chance of living when they are on the left side of the cloner where the bubbles are being created more extensively. I used to have them color coded, but that idea went the way of the dodo pretty quickly LOL.
20180307_164546.jpg

20180307_164546.jpg

Clone tray

FLOWER round 1- day 35
A group thought of the girls, sorry it's so dark..... You know the drill.
20180307_160216.jpg

20180307_160216.jpg

Shot across the bow.
Up close, Crown Royale
20180307_160159.jpg

20180307_160159.jpg

Crown royal, day 35
Up close, soil white cookies
20180307_165706.jpg

20180307_165706.jpg

White Cookies in soil

Veg tent - day 7
Girls are doing well. Now on full strength nutrients. The neglected leaves that I created by allowing a few of them to dry out while they were in seedling stage has all but disappeared. I have done some slight training to allow lower nodes to get some more light. Also fed my DWC Crown Royale tonight as she was only on Calmag for her first bucket.......things are looking good in here.
20180307_171418.jpg

20180307_171418.jpg

Veg tent
My ATF in the back right corner is presently being tested to see if it's a male or female. Once again, I used my cloner to create roots on a cutting. Then I will flip it to flower where I will leave it for 5 or 6 days to see if any pre flowers show up?

That's all for last night.....today.
Have a great day 420!
Click to expand...
Cool way to test man great reads and awesome stuff going on buddy
 
Derbybud said:
How hard have you been pushing your nitrogen? I ease up the last week or 2 and only do a few days of flush. Then just straight rain water for a few days and i don't ph it then slash her down.
Click to expand...
Thanks Derb......but This is my girl in veg. The Crown Royal is obviously a little bit more susceptible to high PPM values than the white cookies is. I pushed my white cookies in veg as well and she took it no problem, this one is definitely showing signs of malnutrition. She hasn't grown much at all, her new growth seem to come to a standstill for 3 or 4 days, so I started a flush. I was looking for suggestions on my flush in veg? As I said before, all I've done is pH to 5.7 and add Cal Mag in the appropriate amount for 15 liters of water.
 
Derbybud said:
Guy if you go into your gallery you can edit pictures by pressing on the 3 vertical dots.
Click to expand...
I'm missing something Derb do you do your work on a computer or on a smartphone?, it doesn't give me the option to edit my photos at all when I go into my member gallery and pick the photo that I want to change. It gives me the option of setting it as my avatar Etc but that's it.
 
Kingjoe83 said:
Two days or less buddy my thread has lots of info now .
Click to expand...
I've been lingering a bit in the background but not a lot of comments due to time restrictions. Moe has turned out quite nicely for you though!!l Let me ask you, why did she come down 10 days or so before the others? Were they planted at different intervals? Whats next on uour docket? Ive got a pile of clones if you need any?
 
I'm pulling my hair out trying to edit photos lol. My situation is this, if I see a photo I like on my phone, I go into the media section of this thread, upload it and by the time it shows up in my phone it's turned through 90 degrees to the right. So I go back into my phone gallery, adjust the photo that I want to 90 degrees to the left and then reenter 420 magazine and try downloading the photo again. When I download it for the second time it downloads it exactly the way that I just changed it to. There is no middle ground. Not sure what I am doing wrong here, I'm usually relatively decent once somebody shows me what to do with technology LOL. If this was wood, or somebody's basement tile job......id be cleaning up by now lmao.......
 
Guy Cavallero said:
I've been lingering a bit in the background but not a lot of comments due to time restrictions. Moe has turned out quite nicely for you though!!l Let me ask you, why did she come down 10 days or so before the others? Were they planted at different intervals? Whats next on uour docket? Ive got a pile of clones if you need any?
Click to expand...


First off buddy I would love clones but always fail with them. Secondly , I am actually not going to be able to grow this summer I know first time in three years .

Not by choice really long story .

But I’ll be up and going next winter .september I’ll be back here.

As far as moe goes I took her down early as experience is needed . I wanted to see different highs off headband. Also , so my boss’ s wife smoked purple kush from a license bc producer and a test bud of headband of moe . And said she preferred moe /headband over the purple kush I bought . She loved that taste she said and the high didnt Make her sleepy so she can preform motherly duties and function more clearly. I guess that headband did it for her. minus its potency’s side .

So I said screw it lots of clear and some
Cloudy. Let’s do it . So waiting for it cure to see if I see a difference myself in potentcy and to determine a high.

Yes base on trichromes which I technically am i suppose.

Then I have curly in dark period now will choptoday and trim more fans and big sugars and then hang upside down yup dry enough to touch with hands with out sticky lol if makes sense then I’ll do my more or less final trimming box my trimmininsg go for few days til dry enough shaking box to get fresh air movement in . Few times a day .
Sorry realized I’m explaining my curing process just saying my rh is 45-55% and temp aroud. 68-73 f lingers but consistent.

Sorry back to curly is getting chop a wel later I seen more clouds then diamonds lol

No amber yet that will be Larry at ten to 20% I will chop her then I’ll be able to see if I see any difference at all and be able to tell which “I “prefer better .


Help answer your question bud?
 
Guy Cavallero said:
I'm pulling my hair out trying to edit photos lol. My situation is this, if I see a photo I like on my phone, I go into the media section of this thread, upload it and by the time it shows up in my phone it's turned through 90 degrees to the right. So I go back into my phone gallery, adjust the photo that I want to 90 degrees to the left and then reenter 420 magazine and try downloading the photo again. When I download it for the second time it downloads it exactly the way that I just changed it to. There is no middle ground. Not sure what I am doing wrong here, I'm usually relatively decent once somebody shows me what to do with technology LOL. If this was wood, or somebody's basement tile job......id be cleaning up by now lmao.......
Click to expand...
No, those dots once you go to member galleries upload new image from
Smartphone gallery for example so your pictures on your cellular device . Once you post and it flips picture yes get annoying and time consuming not happy about it eithier but is what it is for now right . Sure hey get to fixing her soon. Anyway once you select the image/s you want to upload and they turn on ya. Scroll down you’ll see those dots it will say edit image then there is arrows there that look lieo a curve one going right the other going left pick one until centred . Does that help buddy I think it’s a internal server issue not us .

View album 16880
 
Back
Top Bottom