Mars-Hydro LED Grow Light Discussion

Yeah they are advertised wrong,that's where I think the confusion is coming from.

Some suppliers sell 1000W led on Ebay and said they use 10W chips, but the draw power of each leds is very low, about 2.2--2.3W. But it is very popular, many people search this lights on Alibaba and on other third party.
 
The PPFD chart on your webpage for the Epistar320 is also advertised wrong. I think you meant to label the target squares as 2' x 2', 3' x 3' and 4' x 4'; not 4' X 4', 4.5' X 4.5', 5' X 5'.

pro2-320-8.jpg
 
The PPFD chart on your webpage for the Epistar320 is also advertised wrong. I think you meant to label the target squares as 2' x 2', 3' x 3' and 4' x 4'; not 4' X 4', 4.5' X 4.5', 5' X 5'.

In detailed description, we wrote the coverage of 320: 4'x4'/one light, 8'x8'/4pcs light
 
I decided to go with a 2 by 4 foot tent and a pair of Mars Hydro 300s

Would you like to try 2pcs of reflector 48? It is without glasses outside of leds, penetration is deeper.
 
In detailed description, we wrote the coverage of 320: 4'x4'/one light, 8'x8'/4pcs light

I'm talking about the image, not the description. In the image, you have the zones of the PPFD chart mis-labeled.
4' X 4', 4.5' X 4.5', 5' X 5' should be correctly labeled in the image as 2' x 2', 3' x 3' and 4' x 4' to match the 4x4' description and the individual PPFD values in each zone of the chart.

pro2-320-8.jpg
 
I'm talking about the image, not the description. In the image, you have the zones of the PPFD chart mis-labeled.

Did you use proII 320? Did you test it?
 
Did you use proII 320? Did you test it?

No, but you tested it two previous times and the values from those previously published charts indicate that 1400 PPFD represents the power at 18" in the 2x2 zone, not 4x4.

Epistar3202.jpg

ss_2018-01-02_at_03_50_40_.png



Plus, just look at the dimensions of the squares in your chart on the website. The center square is 1/2 width of the total chart, which means the label of 4x4 can't be accurate as 4 is not half of 5.

pro2-320-8.jpg
 
Because the center box is half width of the outside box, and 2 is half of 4, I think the boxes are supposed to be labeled 2' x 2', 3' x 3' and 4' x 4'.

Starting with 4x4 at the center box doesn't make sense geometrically and doesn't match your previous chart's values or the 4x4' description.

pro2-320-8.jpg
 
Because the center box is half width of the outside box, and 2 is half of 4, I think the boxes are supposed to be labeled 2' x 2', 3' x 3' and 4' x 4'.

Starting with 4x4 at the center box doesn't make sense geometrically and doesn't match your previous chart's values or the 4x4' description.

pro2-320-8.jpg
If anyone asks I'm sure she would tell them .
 
Back
Top Bottom