LKABudMan's Orange Grove - 4 Mimosa x Orange Punch In RDWC - Sponsored By VIVOSUN

Let me introduce you to the VIVOSUN VSF6450.











Full-Spectrum Sunlike Lighting: Designed with optimal light-spectrum coverage using 2142PCS Samsung 3030 (6500K) lights and 84PCS 660nm Osram 3030 lights in the white, warm white, red, and far-red light spectrums; The 660nm diodes improve photosynthesis and are most beneficial during blooming and flowering; Blue light promotes plants’ germination and when combined with the red lights leads to higher yields.

Foldable Design & Detachable Ballast: The grow light can be folded up to 180° making it easy to install or store and thus keeping your room tidy; It comes with a detachable ballast and a 9.8ft. long power cord with 120V America NEMA 5-15P plug; Mounting the ballast outside the tent or away from the light can reduce ambient heat and extend your light’s service lifespan.

Dimmable & Uniform Lighting: Comes equipped with a dimming knob with 6 levels of light intensity ranging from 0% (off), to 40%, 50%, 60%, 80%, and 100%; The light bar design has IP66 water prevention, benefits from heat dissipation, and enables uniform light density throughout the plant canopy at all stages of growth.

High Efficiency & Stability: With Samsung 3030 & OSRAM 3030 and the Inventronics driver, this grow light achieves 40% higher PPFD than HID lamps and delivers high-efficiency (2.8μmol/J) LED light with low power consumption (645W) for real energy savings; Ideal for efficient and effective gardeners and specialists.

Daisy-Chain-Ability: The daisy-chain ability allows connections of up to 160 lights in a series — simply control the main light with a VIVOSUN controller to dim or brighten all the lights in the series; We offer you a digital timer to control/preset the light, making it easy if you are not home; It can be used for indoor planting, grow tents (perfect for 4’ x 4’ or 5’ x 5’), hydroponics, gardens, and commercial cultivation in large rooms.

Warranty: 5-Year Warranty Guaranteed
Features: ETL certification Highly efficient, reliable branded driver

Tech Spec:
Input Voltage (V): 120-277V
PPE: 2.8 μmol/J
PPF: 1800 μmol/s
Input Power: 645W
Frequency: 50/60 Hz
Driver: Inventronics
Spectrum: Full Spectrum
Certification: ETL / CE
Lifetime: Q90 >54000 Hrs
Weight: 26.5 lbs
Power Cord Length: 9.8 ft
Waterproof Level: IP66
Light Distribution: 120°
Spectrum: 6500K, 3000K, 660nm
Dimensions: 41.3”L x 43.5”W x 3.2”H
Light Source: Samsung LM301 & OSRAM 3030
Dimming Options: OFF / 40% / 50% / 60% / 80% / 100%

@VIVOSUN
#VIVOSUN
#LoveWhatYouGrow
 
The VIVOSUN VSF6450 was packaged well. It came completely assembled (except the driver) and folded in the box.



The light by itself is surprisingly light and easy to handle. The driver was separate and can be easily mounted on top of the light or outside the tent. Since I don't really have issues with heat in my tent, and the exhaust is going through the roof right next to the driver, I mounted the driver on the light. Luckily, it was easy enough to mount after the light was installed which is good, since the driver is quite heavy.

The light has several mounting options, including steel cable hangers. For my tent right now there was only one; bar hangers that came with the light. I wasn't really sure how I was going to get this light in my tent with so little room. Being able to fold the light to get it in the tent really helped. Then I used the bar hangers to hang the light from two bars at the top of the tent. I was able to hang the light to within a couple of inches of the top of the tent. After it was hung I popped the driver on and plugged it in. Overall it was a much easier experience than I was anticipating.






#VIVOSUN
#LoveWhatYouGrow
 
You're cooking with hot sauce now BudMan! :Rasta:
 
As if that room could have gotten any better, WOW. :yahoo:
Brilliant piece of kit Amigo. :drool:
Hope your having a great weekend.




Stay safe
Bill284 :cool:
 
Nice light ;)

I'd say by the looks of the pistils you should be close to or at the end of stretch ?

Measure today and again tomorrow. If it's an inch or so they are still stretching....

How long since flip ?

Cheers
Thanks @Chuckeye I think they're almost done stretching. I've been measuring daily and they're definitely slowing down. It's been 25 days since the flip to 12/12, and they've been in flower for 14 days.
 
Omg! That looks so fancy!
Right?! I love how it attaches tight to the top of the tent, it really looks like this tent was made for this light :)
 
As if that room could have gotten any better, WOW. :yahoo:
Brilliant piece of kit Amigo. :drool:
Hope your having a great weekend.




Stay safe
Bill284 :cool:
Thanks @Bill284 I'm having a fantastic weekend :) Hope you are well and that greenhouse isn't driving you too hard ;)
 
I had asked about the driver mounting, but you answered in a later post.
It is impressive and should bump up your yield.

I think I would move the driver outside the tent.
It's heavy.
It does generate heat and would probably cool better with lots of open space around it. Might even make it last longer too.
You might want the heat in the winter, but if your basement is like mine, it's not that much colder in the winter.
 
The VIVOSUN VSF6450 was packaged well. It came completely assembled (except the driver) and folded in the box.



The light by itself is surprisingly light and easy to handle. The driver was separate and can be easily mounted on top of the light or outside the tent. Since I don't really have issues with heat in my tent, and the exhaust is going through the roof right next to the driver, I mounted the driver on the light. Luckily, it was easy enough to mount after the light was installed which is good, since the driver is quite heavy.

The light has several mounting options, including steel cable hangers. For my tent right now there was only one; bar hangers that came with the light. I wasn't really sure how I was going to get this light in my tent with so little room. Being able to fold the light to get it in the tent really helped. Then I used the bar hangers to hang the light from two bars at the top of the tent. I was able to hang the light to within a couple of inches of the top of the tent. After it was hung I popped the driver on and plugged it in. Overall it was a much easier experience than I was anticipating.






#VIVOSUN
#LoveWhatYouGrow
That did it!
 
Let me introduce you to the VIVOSUN VSF6450.











Full-Spectrum Sunlike Lighting: Designed with optimal light-spectrum coverage using 2142PCS Samsung 3030 (6500K) lights and 84PCS 660nm Osram 3030 lights in the white, warm white, red, and far-red light spectrums; The 660nm diodes improve photosynthesis and are most beneficial during blooming and flowering; Blue light promotes plants’ germination and when combined with the red lights leads to higher yields.

Foldable Design & Detachable Ballast: The grow light can be folded up to 180° making it easy to install or store and thus keeping your room tidy; It comes with a detachable ballast and a 9.8ft. long power cord with 120V America NEMA 5-15P plug; Mounting the ballast outside the tent or away from the light can reduce ambient heat and extend your light’s service lifespan.

Dimmable & Uniform Lighting: Comes equipped with a dimming knob with 6 levels of light intensity ranging from 0% (off), to 40%, 50%, 60%, 80%, and 100%; The light bar design has IP66 water prevention, benefits from heat dissipation, and enables uniform light density throughout the plant canopy at all stages of growth.

High Efficiency & Stability: With Samsung 3030 & OSRAM 3030 and the Inventronics driver, this grow light achieves 40% higher PPFD than HID lamps and delivers high-efficiency (2.8μmol/J) LED light with low power consumption (645W) for real energy savings; Ideal for efficient and effective gardeners and specialists.

Daisy-Chain-Ability: The daisy-chain ability allows connections of up to 160 lights in a series — simply control the main light with a VIVOSUN controller to dim or brighten all the lights in the series; We offer you a digital timer to control/preset the light, making it easy if you are not home; It can be used for indoor planting, grow tents (perfect for 4’ x 4’ or 5’ x 5’), hydroponics, gardens, and commercial cultivation in large rooms.

Warranty: 5-Year Warranty Guaranteed
Features: ETL certification Highly efficient, reliable branded driver

Tech Spec:
Input Voltage (V): 120-277V
PPE: 2.8 μmol/J
PPF: 1800 μmol/s
Input Power: 645W
Frequency: 50/60 Hz
Driver: Inventronics
Spectrum: Full Spectrum
Certification: ETL / CE
Lifetime: Q90 >54000 Hrs
Weight: 26.5 lbs
Power Cord Length: 9.8 ft
Waterproof Level: IP66
Light Distribution: 120°
Spectrum: 6500K, 3000K, 660nm
Dimensions: 41.3”L x 43.5”W x 3.2”H
Light Source: Samsung LM301 & OSRAM 3030
Dimming Options: OFF / 40% / 50% / 60% / 80% / 100%

@VIVOSUN
#VIVOSUN
#LoveWhatYouGrow
That's my kind of light BudMan! It's going to rock! Best luck, not that you need any with a beauty like that! @VIVOSUN for the win!
 
Impressive bit of kit there mate :high-five:I'm thinking of investing in 2 similar lights for my flowering space :morenutes:
I can't wait to see it in action :popcorn: :green_heart:
Thanks Gandalf @VIVOSUN makes sone great lights. I'm looking forward to seeing what it can do too.
 
I had asked about the driver mounting, but you answered in a later post.
It is impressive and should bump up your yield.

I think I would move the driver outside the tent.
It's heavy.
It does generate heat and would probably cool better with lots of open space around it. Might even make it last longer too.
You might want the heat in the winter, but if your basement is like mine, it's not that much colder in the winter.
Thanks @gwhunran You make good points. I'll probably end up mounting it out of the tent. Of course I was thinking at one point of adding a 400w HPS to the tent last winter for the heat 😉
 
Back
Top Bottom