- Thread starter
- #61
Good morning, Chuck. I'm using the 3-part Flora Series of nutes, i.e. Gro, Micro and Bloom. I make up 10L at a time and use the VEG2 amounts which are 7.5 ml of Gro, 5 ml of Micro and 2.5 ml of Bloom.
When I feed them, each girl takes about 2L.
I'm using one gallon plastic milk containers to mix, just started with 4g/gallon of MC
BTW > when I did my hempy grow I fed the same amount of GH Maxi as the MC for the other girls in ProMix HP.
Hempy Grow journal in my signature...
Just a thought, the Miracle Grow Perlite sold here has a small amount of nutrients in it !
Could be interfering with your GH ?
My mistake. I'm using Holiday Perlite, which has nothing in it but perlite but apparently, the bag contains both coarse perlite as well as medium perlite.
How about you do a flush with 2 or even 3 times the volume of the pot with water.
With the last unit add back your GH nutrients.. Get that Miracle Grow stuff out of there
If there's nothing but perlite in the pots, should I still flush them?
If you feel it is a possibility that the plant is indeed overwatered, after the third unit, tilt your container over to drain about half of the reservoir.
Or as much as you comfortably can and the next day run another gallon (?) through, again drain as much as you want !
Set your fan(s) so the plants leaves are slightly rustling Such a nice word
More air flow, more transpiration and more food....
IIRC my 30 day old hempy girl was getting a 1/2 gallon of feed in a total container of 4 gallons of perlite.
Lastly, what is your lights watt draw from the wall, power setting and distance to plant top ?
30,000 lux/450 par should be good....
Cheers, eh ?
I have no idea what your lights watt draw from the wall means or is. I'm using an FC3000 Full Spectrum 300W LED from @Mars Hydro.
The lights are 18" above the leaves. Here is the data from each tent:
TENT 1 | TENT 2 | TENT 3 | |
DISTANCE | 18" | 18" | 18" |
PPFD | 828 | 660 | 670 |
DLI | 61.7 | 51 | 52.5 |
LUX | 49300 | 42000 | 48000 |
KELVIN | 6250 | 5750 | 5750 |