1080w LED Inferno

Setting Sun said:
catch 'em early, hit 'em hard!

that's my motto ;)
Click to expand...
damn straight! then when they try to get back up kick them down again and stomp them out.
mites get smoked like blunts in my grow area.lol:blunt:
The Butcher said:
Yeah that skunk will get ya. but it will produce one hell of a smell when all is said and done. and the colas are always (((HUGE))) on skunk dom plants. Even if they are 6 weeks out the final product will smell unlike anything you've smelled before.
Click to expand...

ya ive grown this strain 3 times and ive grown skunk strains many times. i just cant seem to pick anything els i love the skunks. but the HS is by fat the best ive smoked and smelt. Shiva skunk was another good on and skunk#1 was cool but my least favorite one. all skunks do great in high temps also. but this Hindu Skunk is one of a kind, some of my favorite buds ive smoked.

I will tell you the best smelling weed is Jack Herer. or that XJ-13. one of a kind smell their that you will never forget.

the HS is a very sweet smelling skunk if that makes sense?..lol..
 
The Butcher said:
Cant go wrong with the Jack Herer..The XJ-13...Hmmmm now thats on the list forsure :ganjamon:
Click to expand...

yup just Imagen Jack Herer crossed with G13.. its truly some killer smoke and a fun plant to grow barley any leaves just pure buds and a nice open up canopy for the light to shine threw. they smell is a sweet peppery jack herer smell. truly the best smelling weed i have smelt.
 
ok i now have 4 NPS in my room. i have one on my fan blowing around the room one in front of all of my plants and 2 of them hooked on my plants in the middle of the canopy to hit the mites deep into the canopy.

my question is do you think if a leaf touches the inside of the NPS it could harm my plant or kill it? theirs allot of leafs so its hard to tell if that would happen. i wouldn't think it would hurt the whole plant maybe just one leaf that touched it right?
 
I think it would be OK if the leaves touch the plastic carrier.

The yellow strip inside the holder is what you don't want to play with, but as long as it's in the holder, you or your plants can touch that and it's not harmful.

What kills bugs with the NPS is a gas that emanates out of the holes on the plastic carrier. It's not a "contact" type of poison, but rather a gas, and plants don't absorb the gas, so I wouldn't worry about it.
 
Setting Sun said:
I think it would be OK if the leaves touch the plastic carrier.

The yellow strip inside the holder is what you don't want to play with, but as long as it's in the holder, you or your plants can touch that and it's not harmful.

What kills bugs with the NPS is a gas that emanates out of the holes on the plastic carrier. It's not a "contact" type of poison, but rather a gas, and plants don't absorb the gas, so I wouldn't worry about it.
Click to expand...

my worry is that a leaf tip with find its way into the yellow strip and touch it and it will be absorb into the plant and harm it. do u think their would be any big harm it a leaf or two touched the inside yellow strip of the NPS? you think the leaf would just die or could it harm my whole plant?
 
When in doubt, just be cautious bro. I say avoid it touching the strip, only in order to avoid it becoming into contact with the strip. If that makes sense....

Four NPS, how big is your room dude? Be careful not to hang out in there for too long, and hopefully you have some fresh air coming in somewhere.

Just be safe bro! Caution usually is a good road to take.

Just my 2 Cents!

-Go
 
Irish,

Loved all your threads with the different led test. I'm currently using 600w led myself. Where I'm at, the room temp is constantly around 65-68F with the lights on. My question is would the low temp affect the growth on the plants?
 
Setting Sun said:
I don't think that would do any harm to either the leaf or the whole plant, but if you want to be sure, just snip or tie down any leaf that's close enough to get in there.
Click to expand...
i agree.
go green said:
When in doubt, just be cautious bro. I say avoid it touching the strip, only in order to avoid it becoming into contact with the strip. If that makes sense....

Four NPS, how big is your room dude? Be careful not to hang out in there for too long, and hopefully you have some fresh air coming in somewhere.

Just be safe bro! Caution usually is a good road to take.

Just my 2 Cents!

-Go
Click to expand...
its not that big 4 NPS is over kill but i want to hit those mites for good. when i go into my room i have all fans and vents going just in-case.
1lbper said:
Irish,

Loved all your threads with the different led test. I'm currently using 600w led myself. Where I'm at, the room temp is constantly around 65-68F with the lights on. My question is would the low temp affect the growth on the plants?
Click to expand...

the lower temps will make ur plants grow slower and stretch allot less, your buds will be more dense. you just have to watch out for mold and ur RH%. some of my better grows were in cold temps.
 
Word. Sounds sweet dude. You always can adapt and adjust things...growing is a constant tweek!

Glad things are going well! I can't wait to see those ladies get fat and yummy!!
 
go green said:
Word. Sounds sweet dude. You always can adapt and adjust things...growing is a constant tweek!

Glad things are going well! I can't wait to see those ladies get fat and yummy!!
Click to expand...

ya you just have to adjust to different condition's if you want to keep growing.

i cant wait for these girls to get fat and to also see what 1080w of leds can do. ive never seen that big of an led grow that was legit and believable that i trusted. so i can see whats up with my own eyes.
 
I have been tracking and following this OC+ stuff the last week. I have some on the way.

What's your take Irish? I always like to hear things from your end. I am going to just mix it in and water. Maybe some top-coating if needed, but adding nothing.

So many trials! So little time!

-Go
 
go green said:
I have been tracking and following this OC+ stuff the last week. I have some on the way.

What's your take Irish? I always like to hear things from your end. I am going to just mix it in and water. Maybe some top-coating if needed, but adding nothing.

So many trials! So little time!

-Go
Click to expand...

i am still on the fence about the OC+. to be honest i had big doubts about it, but after seeing how others plants are looking i am leaning the other way. seems to good to be true but Doc had great results with it. the 2 things i dont like are you cant flush them out before harvest. and i dont like how temps can effect them. i guess you can get different ones for different temps? i haven't seen them at the store but i am sure online will be a good place.

as for e i am waiting for a few others to finish their grows to see how it works out before i use them. if they work good for a few others then i am all over it on my next grow for sure.

their are allot of people using them so it should be soon we see a few results on how they bloom. i can see veg is great with them
 
as allot of you guys i am also getting tired of spending big bucks on plant food and boosters. i am thinking of giving this a try and seeing how it works. i bet it will work just as good as Bud Blaster or Chia ching for a fraction on the cost.
Miracle-Gro Water Soluble Bloom Booster Flower Food - Scotts Miracle-Gro

please give feed back on how you think this will work for the end of flowering the NPK sounds about right.

i was also thinking of using this for the beginning and mid flowering Miracle-Gro Shake 'n Feed Continuous Release Bloom Booster Flower Food - Scotts Miracle-Gro

i think you dont have to mix it in the soil all over you could just shake it on top then when u water it will run down into the medium? its a Continuous Release.

any opinions would be more then thankful.
 
Back
Top Bottom