WestHippie’s 420 OG Hydro 1000 Watt MH/HPS

Day 48 of 12/12
Outside temp 78 humidity 84% S 8 mph
Building temp 74.1 humidity 73 %
Tent temp 77.2 humidity 69%
Canopy temp 79.6 highest
Water temp 70.6 down 2 gallons Falling
TDS 865 ppm was 940 ppm Falling
Ph 5.6 was 5.45 Rising
Considered almost perfect.
As you can see in the pic the leaves are still pointing to the light.
C17B4292-9285-4C76-B95E-91D17CC5569B.jpeg
73D0B71C-14E4-4458-A88A-98089977CF93.png
3C222FBD-BE8B-4AF2-B43F-A6EA7CFA5515.png
EBFA77A8-EFE0-45F7-B45D-9A2E8FB8A5A9.png
 
Day 47 /day 13 of 12/12
B-1
Water temp 69.4 down 1” Falling
TDS 569 ppm was 604 ppm Falling
Ph 5.7 was 5.6 Rising
B-2
Water temp 69.4 down 1/2” Falling
TDS 523 ppm was 559 ppm Falling
Ph 5.7 was 5.6 Rising
B-3
Water temp 69 down 1” Falling
TDS 1049 ppm was 1118 ppm Falling
Ph 5.9 Static
Pics
301B7093-8B42-471C-9144-D2D020F28A68.jpeg
41F0CAC3-977E-4007-B7B5-E136706F9B1C.jpeg
52F155D2-22A9-485E-8DF0-C59A626B2A3B.jpeg
 
Those buds are bulking up well and look nice and greasy! And as long as there's any green left in those leaves they're working for ya. :thumb:
I can see them bulking day by day , maybe I didn’t keep those lower leaves for nothing .
I have to get this MC in the cloner already , getting up just before the lights go out to get the numbers. Had been out mowing before the 4th party starts !
 
Good idea! Tidy and neat for the guests. I'll bet it's gonna be a blast at the Hippie House!
Everybody is on vacation this week, kids have there campers down by the river . My great grand babies are pretty wild was worried about
snakes so I cut it low .
Country Hippie’s party these guys bring fireworks from who knows where , hell of a show for three or four days .
 
Looking good Hippie! I’m excited to see your test run with the MegaCrop in DWC!
I’m going to use it in the flood and drain. I have four clones waiting to get in that tent . I started it there in veg on the bubble phonics (cloner) .
 
How have you found the PH in the bubble cloner? I was thinking of adding some to my cuttings so they can sit in there a while longer but don’t want to worry about the ph lol
I’m fixing to go check again ,day before yesterday was 5.8 .
 
How have you found the PH in the bubble cloner? I was thinking of adding some to my cuttings so they can sit in there a while longer but don’t want to worry about the ph lol

Checked it with the blue lab at 5.77 after checking two days ago .
 
Day 49 of 12/12
Outside temp 80 humidity 82% S 11mph
Building temp 76.5 humidity 74%
Tent temp 79.2 humidity 70%
Canopy temp 82.3 thanks goodness the lights are fixing to go out!
Water temp 70.0 down 2 gallons Falling
TDS 819 ppm was 865 ppm Falling
Ph 5.6 Static
All leaves still pointing to the light means there hungry or just finishing up ?
Sad I can’t get the light under control of the heat ! Pics
4220E556-EBEE-4241-985D-6F66E5174282.jpeg
2BBEB290-4579-4777-953A-97CA61FB0CAB.jpeg
D9BE1620-31EA-4696-A023-2A0B8356F231.jpeg
39D830CB-3849-4524-BB9E-18AAEE59C03F.png
DF23D8E7-9874-450E-A42D-023DE770B264.png
 
Day 48 / day 14 of 12/12 DWC
B-1
Water temp 70.8 down 1” Falling
TDS 523 ppm was 569 ppm Falling
Ph 5.8 Rising
B-2
Water temp 70.5 down 1/2” Falling
TDS 483 ppm was 523 ppm Falling
Ph 5.7 Static
B-3
Water temp 70.5 down 1” Falling
TDS 1003 ppm was 1049 ppm Falling
Ph 5.9 Static
Looking at the MC ph holding for 4 days at 5.8 , blue lab 5.77 sounds perfect for DWC and my flood&drain.
 
Cloner MC with the bench ph pen 5.8 , ppm is probably high 984 ppm . I leveled the scoop to the top didn’t realize it had a line , so about a 1/3 too much . Was at 1099 ppm four days ago ! Girls are getting too big for the cloner !
Should I put the Z7 back in the cloner? Pics of the crowd and lights out !
9A142FA2-1871-478E-A9B1-6089D7D24784.jpeg
83994CE2-DD44-49F5-9424-29F4EE387C9D.jpeg
387FDB34-77BF-4B14-8056-926CF5E76528.jpeg
C7A7186D-1C3D-4EC5-84E1-AF9924004AE8.jpeg
811B8AD6-5C44-49AF-920F-71C5F9B8034F.jpeg
C53D3126-BA51-4FB6-A61E-CBB9AFE8FC31.jpeg
2D62D35B-8221-4368-A019-F91E695B9F83.jpeg
C497C54A-C013-4371-8ABA-785EF5B15728.jpeg
9EAF5909-5ABA-46B2-8E19-3325EA466BE8.jpeg
 
When targeting my elements with hydro buddy, my meter always detects about 50% more EC than what hydro buddy predicts. This is because nutrient calculators can only account for the known elements we seek which usually account for less than 20% of the salt's weight. That means there's a lot of unaccounted for inert materials in our salts that still influence the reservoir EC.
 
Back
Top Bottom