I thought you had pristine water up there so why the bottled water
VIVOHUT
Seeds were soaked exactly 18 hours
I used bottled water with 10 % cheap H202
18 hours hours exactly
#VIVOSUN #Love What You Grow
Bill284
? CL
VIVOHUT Bill284's New Grow Facility: Featuring VIVOSUN & Herbies Seeds
- Thread starter Bill284
- Start date
? CL
Hey Bill great job putting the Vivohut together, it looks awesome. Looking forward to seeing that 5x5 with a VSF6450! Congrats on the new babies.
- Thread starter
- #43
Thanks Amigo.
It's going to be so nice having a climate controlled grow again.
Greenhouse was great but it was just a fun ride.
No real control of heat and humidity.
Speaking of which rh is 30% right now.
Take care my friend.
#VIVOSUN #Love What You Grow
Bill284
Where is your humidifier? Or do you just have Howie licking those seedlings?Thanks Amigo.
It's going to be so nice having a climate controlled grow again.
Greenhouse was great but it was just a fun ride.
No real control of heat and humidity.
Speaking of which rh is 30% right now.
Take care my friend.
#VIVOSUN #Love What You Grow
Bill284
Outstanding job with your Vivohut and now with @VIVOSUNs outstanding equipment + @herbie desert mix I think it’ll be your best work yet. CLThanks Amigo.
It's going to be so nice having a climate controlled grow again.
Greenhouse was great but it was just a fun ride.
No real control of heat and humidity.
Speaking of which rh is 30% right now.
Take care my friend.
#VIVOSUN #Love What You Grow
Bill284
Bounce3d
Well-Known Member
awesome Bill, I'm in to see what else you conjure
WenworG
Well-Known Member
Hey Bill, That Vivohut looks great, have you ever thought about building other Vivohut as a living?
Man you've worked your butt off for this!
Awesome to see you in action again!
Awesome to see you in action again!
nice workin it friend,,
enjoy it,, karma sent from kelowna
enjoy it,, karma sent from kelowna
way to go Bill, you guys deserves the peace of mind that comes with having vivohut situated away from main structure!
- Thread starter
- #51
VIVOHUT
With tweezers never touching the seeds
I put them root down with seed pod just at the surface
Cover for 24 hrs MAX
Then it's solo cup time Bill284 Method
Up Next
Bill284 Method
Solo cup Layering
#VIVOSUN #Love What You Grow
Bill284
Bill284
- Thread starter
- #52
VIVOHUT
@Bill284 Method 
PREPARATION IS KEY !!! 
I'm doing 15 solo cups at once
( #1 ) Step one COCO amendingYou Need these ingredients
- Good Quality Washed & Buffered COCO COIR ( 15 solo cups )
- Clean Perlite ( 4 solo cups ) Approximately 1/3ish of the coco
- Bokashi ( inexpensive stuff from Zn. is fine ) 1 cup
- Insect Frass ( I use Frass & Dazzle 0 - 0 - 0 ) 1.5 cups
* Check the N.P.K. if you use something stronger!
- Mycorrhizal Inoculant ( I currently use DYNOMYCO) just a little
- Clean Mixing Tub
- Spray bottle - I have Roots Excelurator Gold & Superthrive & B1
Diluted with clean water
Thank you @VIVOSUN for the 50 oz. Bottle
- Rubber gloves ( fingers have oil and bacteria on them )
* If possible wear gloves it helps
- Pour COCO into tub & Cover completely with
* Perlite on left
* Bokashi in the middle
* Frass to the right
* DYNOMYCO on the very right hand side
Spray !! Ingredients thoroughly with your spray bottle 
This is important to activate the
Microbes & Fungi
that will instantly start feeding your roots
I Mix it well and let sit for
24 hours before going into solo cups
End of Step # 1
@Bill284 Method
@Herbies Seeds
@VIVOSUN
#VIVOSUN #Love What You Grow 24 hours before going into solo cups
End of Step # 1 @Bill284 Method
@Herbies Seeds
@VIVOSUN
Bill284
- Thread starter
- #53
#VIVOSUN #Love What You Grow
#Bill284
#VIVOSUN #Love What You Grow
#Bill284
- Thread starter
- #55
VIVOHUT
@Bill284 Method Step #2Solo cup preparation
Buy matching clear cups for inside.
This way roots will be visible when required yet not in direct light.
I am using labels from the dollar store.
you can use masking tape or just a marker.
* But make sure you label and date everything.
Don't mix up your plants.
Next you need drain holes in both cups
Very important don't forget drain holes.
I use a pair of scissors and cut 3 on the bottom lip.
A soldering iron makes nice round holes.
Now we are ready to start filling them.
@Bill284 Method
@VIVOSUN
@Herbies Seeds
@VIVOSUN
@Herbies Seeds
#VIVOSUN #Love What You Grow
Bill284
Bill284
- Thread starter
- #56
Once they are labeled and cut get your ingredients and cups all set up.
- Your pre mixed Coco , bokashi, frass, perlite & DYNOMYCO mixture from
yesterday. I let it sit 24 hrs before I use it.
Or soil if you prefer this method works with anything you can put in a pot.
- Bokashi
- Insect Frass
- DYNOMYCO
- Clean Perlite
- Spray bottle with your root mix in it.
I use Superthrive, B1 & Roots Excelurator Gold in water.
- Clear solo cups labeled and cut in a convenient work area all together.
Tip
I put Bokashi & Frass in a mixing cup with a little
DYNOMYCO
This makes it easier to sprinkle on your layers
Try and wear gloves it's a little safer for the roots / babies
First layer is perlite - just cover the bottom of the solo
Then sprinkle on a little of your Bokashi & Frass mixture
#VIVOSUN #Love What You Grow
Bill284
You will need 
- Your pre mixed Coco , bokashi, frass, perlite & DYNOMYCO mixture from
yesterday. I let it sit 24 hrs before I use it.
Or soil if you prefer this method works with anything you can put in a pot.
- Bokashi
- Insect Frass
- DYNOMYCO
- Clean Perlite
- Spray bottle with your root mix in it.
I use Superthrive, B1 & Roots Excelurator Gold in water.
- Clear solo cups labeled and cut in a convenient work area all together.
Tip
I put Bokashi & Frass in a mixing cup with a little
DYNOMYCO
This makes it easier to sprinkle on your layers
Try and wear gloves it's a little safer for the roots / babies
First layer is perlite - just cover the bottom of the solo
Then sprinkle on a little of your Bokashi & Frass mixture
#VIVOSUN #Love What You Grow
Bill284
- Thread starter
- #57
Next is a thin layer of your pre-made Coco
1/4 to 1/2 inch approximately each time
Next a thin layer of perlite
Sprinkle more Bokashi & Frass mixture directly on the perlite
Mist to activate
Next another layer of Coco mix
#VIVOSUN #Love What You Grow
Bill284
The organisation is 10/10 masterclass in progress! Great work bill hope you and yours are wellOnce they are labeled and cut get your ingredients and cups all set up.
You will need
- Your pre mixed Coco , bokashi, frass, perlite & DYNOMYCO mixture from
yesterday. I let it sit 24 hrs before I use it.
Or soil if you prefer this method works with anything you can put in a pot.
- Bokashi
- Insect Frass
- DYNOMYCO
- Clean Perlite
- Spray bottle with your root mix in it.
I use Superthrive, B1 & Roots Excelurator Gold in water.
- Clear solo cups labeled and cut in a convenient work area all together.
Tip
I put Bokashi & Frass in a mixing cup with a little
DYNOMYCO
This makes it easier to sprinkle on your layers
Try and wear gloves it's a little safer for the roots / babies
First layer is perlite - just cover the bottom of the solo
Then sprinkle on a little of your Bokashi & Frass mixture
#VIVOSUN #Love What You Grow
Bill284
- Thread starter
- #59
Thanks G.F.The organisation is 10/10 masterclass in progress! Great work bill hope you and yours are well
The more organized & prepared I am the less my hair catches on fire.
It's easier to do them all at once I fund.
I'm used to the assembly line.
They been in the cups a couple days now.
I'll try and get a current pic.
It's minus 30 here today, hope your staying warm.
#VIVOSUN #Love What You Grow
Bill284
Ye you've got a great system going mate really organised im lovin it. Holy shit that's cold. Tryna stay in as much as possible lol prefer summer to winter.Thanks G.F.
The more organized & prepared I am the less my hair catches on fire.
It's easier to do them all at once I fund.
I'm used to the assembly line.
They been in the cups a couple days now.
I'll try and get a current pic.
It's minus 30 here today, hope your staying warm.
#VIVOSUN #Love What You Grow
Bill284