The Sauga Ends Here

It's been a helluva summer weather wise. One of the best we've had in years. It's such a shame I had to stay indoors to enjoy it. :rolleyes:

We've been typical. Mid 90's, humid AF. Did get almost a weeks reprieve week before last. Upper 70's/low 80's and less humid. Was nice. Next week looks like low-mid 80's, so there's hope here.



And now... to jump onboard the hijack train, already in progress... :D


Very nice Mr. S!! Mr H has been BBQing more often too. Might need to get him an upgrade soon. ;) Don’t mind me, I’m just mentally pre-spending any stimulus money that may or may not be coming my way.


I have been wanting a smoker BBQ. Seen one I liked $3000 the wife said no didn't even want to talk about it. :thedoubletake:

Well, well well... Smokers for meat? Wheelhouse!

I wouldn't go pellet as my first choice. If I were to get one though, it would be a RecTec RT-700. (It's not weed related, so is that ok to link to? Not taking a chance, but it's easy to find with the google machine.)


Next, the "budget" entry. That would be the "Weber Smokey Mountain, 22-inch." It's a hybrid kinda smoker, sort of. You use charcoal (and not that instant light crap) and then supplement with wood chunks. No problemo. I have one of these, and for the price point they are pretty good. It'll need about $200 in upgrades to be super kickin, but that still only brings you to US $500+/-. (Upgrade #1 would be the upgraded door from the Cajun Bandit. It's a must, as the factory door leaks a good bit. Upgrade #2 is to build a wind screen to go around it. Plywood on some 2x2's or 2x4's, shaped in a triangle. Hinges on 2 corners, a latch of some type (hook/eye can work, doesn't have to be ridiculous), and now you have a protective wind block to keep air from being forced into the vents at the bottom.

If anyone is on a budget, or can't get hold of good hardwood (pecan, hickory, post oak), this is your best bet overall. I use mine when I don't want to bother firing off the trailer...



Now, how about some good ol wood fired goodness?

For the "best" overall value, look no further than Lang BBQ Smokers. They are a reverse flow smoker. This is where the exhaust stack is on the same end as the firebox. Wait, wut? That's right. Fire box and stack on the same end.

Here's how it works, in the big picture of things:

Heat from the fire enters the cook chamber at the bottom. Flows under the floor of the chamber, and up into the rest of the chamber at the other end. It then flows back across the cook chamber to the exhaust.

What's this do? Helps even temps out, pretty much. The false floor heats up, giving a better overall temp all the way across. It really lessens the temp diffs from end to end. I love it, personally. And now you see people adding "tuning plates" to their offset's to try and do this same thing.


For most families, a 36" backyard model will be more than plenty. The entry model is US $1495, and if one desired you could add the warming box (for like sides, etc) for $300.

The design is excellent, as is the build quality.

These aren't the "brinkman" pieces of crap (or charbroil, or oklahoma joe, or other crap) you see at home depot or lowe's. These are solid from bottom to top.


For what these Lang smokers are, the price is very good. I know people who build quality pits, and they're pushing 2x the price. The parts are solid, the construction is solid, and the price is very fair for 1/4inch, cold rolled steel.

Heats up, maintains temp just beautifully. It also cooks really, really well.

This is the kind of pit that is handed down from father to son, to grandson. Provided one takes care of their pit, and doesn't neglect it.

I have a bigger model (60" Deluxe), but they're all the same in quality and design. The 36" will hold a ridiculous amount of meat. 6-8 racks of ribs, 4-6 briskets, 8-12 pork butts, or a combination. It has plenty of room for a family, that's for sure.

There are other pit makers out there. For every 1 that's good, there's probably 100 that suck at it. Anyone else that is better, carries a higher price tag (for the most part.)

There's Jambo Pits, Lone Star Grillz, and many more that are good. They will also cost you more too.


For a decent offset, but also one that will need a little TLC when you get it, there is Yoder, as well as Old Country. You can find Old Country pits at Academy Sports & Outdoor (if there is one near by), and Yoder pits are sold in various places. Just depends.

You'll need gasket material and high temp paint for these. Well, at least the Old Country. Maybe for the Yoder, but it's kind of a little better than the Old Country, but not up to the snuff of a Lang, or what Jamie is putting out.

If none of these are possible, look for a pit builder that uses 1/4" cold rolled steel. Accept no imitations. Anything less and you'll find the temps to be a bit unstable, and you do not want anything to do with unstable temps. Temp stability is the first real "secret" to making damn good meat. Followed closely by waiting for that real whispy, thin "blue" smoke to be coming out before even thinking about putting the meat on.

;)
 
Some things are just meant to be @DutchinAB!! (Aka - DAB) Lol, now the big question on everyone’s mind is - do you like dabs? :laughtwo: You may just have to start if you don’t already!

To be honest, no I have never done dabs!! One of these days I will get set up.
 
Very nice work, Brother! :bravo::high-five:
Thanks Krip. I'm just curing the first Meringue now and she turned into a nice solid bud too, the kind you like to break up with your hands as it takes some time.
Well, well well... Smokers for meat? Wheelhouse!
I don't know where to start! Thanks for all the great info. I would have no idea on any of that stuff if you hadn't brought it up. If and when I do go any of those routes then I'll be able to quickly find it again. Bookmarked!
Thanks MV.
 
We've been typical. Mid 90's, humid AF. Did get almost a weeks reprieve week before last. Upper 70's/low 80's and less humid. Was nice. Next week looks like low-mid 80's, so there's hope here.



And now... to jump onboard the hijack train, already in progress... :D







Well, well well... Smokers for meat? Wheelhouse!

I wouldn't go pellet as my first choice. If I were to get one though, it would be a RecTec RT-700. (It's not weed related, so is that ok to link to? Not taking a chance, but it's easy to find with the google machine.)


Next, the "budget" entry. That would be the "Weber Smokey Mountain, 22-inch." It's a hybrid kinda smoker, sort of. You use charcoal (and not that instant light crap) and then supplement with wood chunks. No problemo. I have one of these, and for the price point they are pretty good. It'll need about $200 in upgrades to be super kickin, but that still only brings you to US $500+/-. (Upgrade #1 would be the upgraded door from the Cajun Bandit. It's a must, as the factory door leaks a good bit. Upgrade #2 is to build a wind screen to go around it. Plywood on some 2x2's or 2x4's, shaped in a triangle. Hinges on 2 corners, a latch of some type (hook/eye can work, doesn't have to be ridiculous), and now you have a protective wind block to keep air from being forced into the vents at the bottom.

If anyone is on a budget, or can't get hold of good hardwood (pecan, hickory, post oak), this is your best bet overall. I use mine when I don't want to bother firing off the trailer...



Now, how about some good ol wood fired goodness?

For the "best" overall value, look no further than Lang BBQ Smokers. They are a reverse flow smoker. This is where the exhaust stack is on the same end as the firebox. Wait, wut? That's right. Fire box and stack on the same end.

Here's how it works, in the big picture of things:

Heat from the fire enters the cook chamber at the bottom. Flows under the floor of the chamber, and up into the rest of the chamber at the other end. It then flows back across the cook chamber to the exhaust.

What's this do? Helps even temps out, pretty much. The false floor heats up, giving a better overall temp all the way across. It really lessens the temp diffs from end to end. I love it, personally. And now you see people adding "tuning plates" to their offset's to try and do this same thing.


For most families, a 36" backyard model will be more than plenty. The entry model is US $1495, and if one desired you could add the warming box (for like sides, etc) for $300.

The design is excellent, as is the build quality.

These aren't the "brinkman" pieces of crap (or charbroil, or oklahoma joe, or other crap) you see at home depot or lowe's. These are solid from bottom to top.


For what these Lang smokers are, the price is very good. I know people who build quality pits, and they're pushing 2x the price. The parts are solid, the construction is solid, and the price is very fair for 1/4inch, cold rolled steel.

Heats up, maintains temp just beautifully. It also cooks really, really well.

This is the kind of pit that is handed down from father to son, to grandson. Provided one takes care of their pit, and doesn't neglect it.

I have a bigger model (60" Deluxe), but they're all the same in quality and design. The 36" will hold a ridiculous amount of meat. 6-8 racks of ribs, 4-6 briskets, 8-12 pork butts, or a combination. It has plenty of room for a family, that's for sure.

There are other pit makers out there. For every 1 that's good, there's probably 100 that suck at it. Anyone else that is better, carries a higher price tag (for the most part.)

There's Jambo Pits, Lone Star Grillz, and many more that are good. They will also cost you more too.


For a decent offset, but also one that will need a little TLC when you get it, there is Yoder, as well as Old Country. You can find Old Country pits at Academy Sports & Outdoor (if there is one near by), and Yoder pits are sold in various places. Just depends.

You'll need gasket material and high temp paint for these. Well, at least the Old Country. Maybe for the Yoder, but it's kind of a little better than the Old Country, but not up to the snuff of a Lang, or what Jamie is putting out.

If none of these are possible, look for a pit builder that uses 1/4" cold rolled steel. Accept no imitations. Anything less and you'll find the temps to be a bit unstable, and you do not want anything to do with unstable temps. Temp stability is the first real "secret" to making damn good meat. Followed closely by waiting for that real whispy, thin "blue" smoke to be coming out before even thinking about putting the meat on.

;)
MV you really know your smokers. I checked out the RecTec RT-700 nice I like the bull horn handles don't help the smoking but looks cool. Hoping to get a deal on one this fall. Thanks for all the info on them. I have never used one but love BBQing and used to smoke meat and fish. So only seems like the right thing to do putting them both together.
 
Oh phooey. I realize I missed out on the question around a "gas" grill.

Weber Genesis, hands down. Them cheap ones you end up having to replace every year or two, at best. Not worth it overall.

Better setup:

Get a weber kettle. Yes, it's charcoal. But beats gas hands down.
However, pair that with a Blackstone Griddle.

Now you're set to jet. :cheesygrinsmiley:




I don't know where to start! Thanks for all the great info. I would have no idea on any of that stuff if you hadn't brought it up. If and when I do go any of those routes then I'll be able to quickly find it again. Bookmarked!
Thanks MV.


You're quite welcome. Sorry about the book, but if there's one thing that makes me sadder than people buying crap lighting for plants... it's people wasting money on a bad smoker. :rofl:

Hit me up when you're ready, and I'll be happy help/answer what I can.

Damn. Now I'm gonna have to fire off this weekend. :rofl:



MV you really know your smokers. I checked out the RecTec RT-700 nice I like the bull horn handles don't help the smoking but looks cool. Hoping to get a deal on one this fall. Thanks for all the info on them. I have never used one but love BBQing and used to smoke meat and fish. So only seems like the right thing to do putting them both together.


You're welcome. For a novice-level type smoker, without wasting your money, I'd go for the Weber Smokey Mountain (aka: WSM) as it is the lowest entry point that isn't complete junk.

You can skip the upgraded door to start if you needed to, but you'll find you want it fairly quick.

They are easy peasy, but there will be one tool that is an absolute must with any of these: a remote temp monitor.

Either a weber iGrill 3, or a Thermoworks Smoke X or Signals. You want something with more than 2 probe ports. That way when you run a pork butt and a brisket, you got a probe on each one as well as one on the cook chamber itself. If you get a 2-port (like a Maverick or something) then you get the cook temp, and only 1 meat temp. Brisket and ribs, no biggie. You won't ever put a probe on pork ribs. Brisket and a butt, or a butt and a chicken, or whatever and you can see how two probes just aren't enough.
 
Oh phooey. I realize I missed out on the question around a "gas" grill.

Weber Genesis, hands down. Them cheap ones you end up having to replace every year or two, at best. Not worth it overall.

Better setup:

Get a weber kettle. Yes, it's charcoal. But beats gas hands down.
However, pair that with a Blackstone Griddle.

Now you're set to jet. :cheesygrinsmiley:







You're quite welcome. Sorry about the book, but if there's one thing that makes me sadder than people buying crap lighting for plants... it's people wasting money on a bad smoker. :rofl:

Hit me up when you're ready, and I'll be happy help/answer what I can.

Damn. Now I'm gonna have to fire off this weekend. :rofl:






You're welcome. For a novice-level type smoker, without wasting your money, I'd go for the Weber Smokey Mountain (aka: WSM) as it is the lowest entry point that isn't complete junk.

You can skip the upgraded door to start if you needed to, but you'll find you want it fairly quick.

They are easy peasy, but there will be one tool that is an absolute must with any of these: a remote temp monitor.

Either a weber iGrill 3, or a Thermoworks Smoke X or Signals. You want something with more than 2 probe ports. That way when you run a pork butt and a brisket, you got a probe on each one as well as one on the cook chamber itself. If you get a 2-port (like a Maverick or something) then you get the cook temp, and only 1 meat temp. Brisket and ribs, no biggie. You won't ever put a probe on pork ribs. Brisket and a butt, or a butt and a chicken, or whatever and you can see how two probes just aren't enough.
I think that rec tec 700 only had 2 temp probe plugs. I see alot of cheap flimsy ones around. I will go to BBQ galore that's a local BBQ superstore and have a good comparisom. Problem is I want a rosin press also.
 
I think that rec tec 700 only had 2 temp probe plugs. I see alot of cheap flimsy ones around. I will go to BBQ galore that's a local BBQ superstore and have a good comparisom. Problem is I want a rosin press also.

Don't sweat the probe ports on the RecTec. Use a separate one and you'll be much happier.

The iGrill 3 runs about US $100, the Thermoworks run about $170 for the Smoke X and $230 for the Signals.

I use an iGrill, but only because the Thermoworks weren't out when I bought this one. Only real complaint is the range. It hooks up via bluetooth to your phone/tablet. I just hook my tablet up, plug it in to keep charging, and leave it sitting where I can see/hear it from a few places.

There are a few that will hook up to your wifi, but they run a little more. At some point that will probably be the route I go, but not before this one dies off.
 
@Scottylikesbud
Get yourself a paint mixer for the end of your drill. That's how I used to make Buble hash.
82205008_L.jpg

I sell a lot of these at work.. even gets a 5 gallon jug of punch cold with a bag of ice in fast minute.

Plants are looking killer MrSauga! The meringue has that shimmer to her. I hope you are having a wonderful evening!

:passitleft:
 
Hey everybody!
Happy Friday to all and I hope you each have a great weekend. Remember to wear those masks when in a public place and if someone gets to close kick 'em in the shins.
So here's our latest update on the @Weedseedsexpress beans. Speaking of which all you Northern Lights fans should really check out the savings on right now at Weedseedsexpress. This NL x BB will get you 10 free seeds if you purchase 10! Can't go wrong with that.
1597455725021.png


Now let's see what I got to show ya's. The ladies are all doing fine. They will be getting their feed tomorrow which is strictly MC v1 and some Kelp Extract, nothing else.










:Rasta:
 
Hey everybody!
Happy Friday to all and I hope you each have a great weekend. Remember to wear those masks when in a public place and if someone gets to close kick 'em in the shins.
So here's our latest update on the @Weedseedsexpress beans. Speaking of which all you Northern Lights fans should really check out the savings on right now at Weedseedsexpress. This NL x BB will get you 10 free seeds if you purchase 10! Can't go wrong with that.
1597455725021.png


Now let's see what I got to show ya's. The ladies are all doing fine. They will be getting their feed tomorrow which is strictly MC v1 and some Kelp Extract, nothing else.










:Rasta:
Looking great
 
Back
Top Bottom