The Quadsquad Thread: A Community For Quadlining

I’ve been on vacation guys but so glad to see all these quadlines going on and looking great! All my plants got uppotted before I left and this is what I came home to!
80442276-AA25-430A-AFBA-AEF7EFFE43F1.jpeg
Yikes!!!
But after a little defol (mainly just clearing out the undercarriage) it’s looking a little more manageable!

Put a couple ladies that will be pollinated in another tent. So now we’re lookin like this!
AC267B0C-95B0-4678-B777-0CF9D12A5968.jpeg
Beautiful Quads just about ready for flip!
 
Is that an auto or did you just keep it stunted? I'm asking because I have some OG Kush Auto seeds that I think I wanna try quadlining them.
They’re all autos, she’s was doing fine after I Quaded her but suffered a heat stroke when my ac went out these. summers can be brutal down here in the sunshine state. But although stunded I can tell it’s some grade a dank.
 
They’re all autos, she’s was doing fine after I Quaded her but suffered a heat stroke when my ac went out these. summers can be brutal down here in the sunshine state. But although stunded I can tell it’s some grade a dank.
Yeah, you guys had the hottest day on record last week.
 
little quad update

alaskan purple - day 36
FE16A7A6-AE16-4789-B95A-300B95BDBC57.jpeg
E80C4399-CF97-4A14-BA5C-2B1DF2AE57E1.jpeg
C1CD7361-D152-42C3-8B85-70FB5EB6FE4F.jpeg


bubblegum - day 36
0BFF72F8-3AA1-41D7-B358-78FEB0F95B7A.jpeg
E0FB9138-B095-4B62-8284-3494507D2D7A.jpeg
07DED3EC-D9A8-4B63-B500-FEBB6DA56677.jpeg


daily adjusting with these two atm
if you look closely, you can see how i have clamped across the fans of the 2nd from top nodes, there has naturally been a slight twist form in the arms, just the tiniest amount, but enough for me to clamp in those positions without hardly any effort to expose all node growths, from base up, to the sides, as opposed to interval nodes facing up and down...
their flower room will be empty in a week or less.. these will be moved acclimatised into there at that point, not sure on flip date as of yet.

and lastly my unkownstrain, day 26 a little webbed leaf thing lol
started her quad day before yesterday
E91945C9-C04C-4809-BCF8-4897E5E1937C.jpeg
6A9EAD52-4EA3-4B7A-9E1A-67C3670A0115.jpeg
DAF3D0F8-64A5-4000-B77A-909EA286FEA9.jpeg

then
12653F28-9735-46AB-B5DD-C1F7550278E2.jpeg


and now
will uppot her tomorrow if i get time.
thats all for now folks:passitleft:
 
Woohoo , seems things are progressing nicely now. overall only damaged 2 nodes for all 8 girls. Blue gelato41 had two nodes snapped off when i dropped my camera, doh. there is new growth below the snapped ones so will just slow things on her a little. The Os is thriving along with the Pog. still a ways to go but a decent start.

The back row girls filling out
20190611_182551.jpg

The gorillas and cookie kush
20190611_182524.jpg
20190611_182447.jpg
20190611_182358.jpg
20190611_182310.jpg
 
I’ve been on vacation guys but so glad to see all these quadlines going on and looking great! All my plants got uppotted before I left and this is what I came home to!
80442276-AA25-430A-AFBA-AEF7EFFE43F1.jpeg
Yikes!!!
But after a little defol (mainly just clearing out the undercarriage) it’s looking a little more manageable!

Put a couple ladies that will be pollinated in another tent. So now we’re lookin like this!
AC267B0C-95B0-4678-B777-0CF9D12A5968.jpeg
Beautiful Quads just about ready for flip!
Sweet Mr Magoo. Did you make that PVC rail, and what other uses have you used it for?
 
Day 35 update for my Gelato auto quad.
I've quit adding new tie downs, letting it grow upward now. Its been pushing pistils for a week now and seems to be starting to stretch.
Got watered and fed last night took almost 2 gallons before it started to get some run off.
20190611_223936.jpg
20190611_223926.jpg
20190611_223832.jpg
20190611_223850.jpg
 
Day 35 update for my Gelato auto quad.
I've quit adding new tie downs, letting it grow upward now. Its been pushing pistils for a week now and seems to be starting to stretch.
Got watered and fed last night took almost 2 gallons before it started to get some run off.
20190611_223936.jpg
20190611_223926.jpg
20190611_223832.jpg
20190611_223850.jpg
Looking good Knife! She seems to be enjoying her home and growing well! You should get some great meds off her
 
Woohoo , seems things are progressing nicely now. overall only damaged 2 nodes for all 8 girls. Blue gelato41 had two nodes snapped off when i dropped my camera, doh. there is new growth below the snapped ones so will just slow things on her a little. The Os is thriving along with the Pog. still a ways to go but a decent start.

The back row girls filling out
20190611_182551.jpg

The gorillas and cookie kush
20190611_182524.jpg
20190611_182447.jpg
20190611_182358.jpg
20190611_182310.jpg

They are recovering!!
 
Looking good Knife! She seems to be enjoying her home and growing well! You should get some great meds off her
Thanks Dutch, when you set up your inkbird controllers did you have to calibrate either of them? Up to now I've been able to maintain temps between 25°-26° with lights on but since hooking up the inkbirds it won't come down from 28°
 
Thanks Dutch, when you set up your inkbird controllers did you have to calibrate either of them? Up to now I've been able to maintain temps between 25°-26° with lights on but since hooking up the inkbirds it won't come down from 28°

I had to setup the base levels and my inputs but after that I didn’t have to touch a thing! Maybe try to reset and reprogram the unit to see if that helps!
 
Day 35 update for my Gelato auto quad.
I've quit adding new tie downs, letting it grow upward now. Its been pushing pistils for a week now and seems to be starting to stretch.
Got watered and fed last night took almost 2 gallons before it started to get some run off.
20190611_223936.jpg
20190611_223926.jpg
20190611_223832.jpg
20190611_223850.jpg
That looks sweet. I ran across you folks yesterday and am going to use this manipulation on my 2 Autos'. Would I be good going with 12"x 1" 11 gauge staples as my anchors or another size? I've been using pipe cleaners for my LST, but know they won't be functional for this tech.
 
That looks sweet. I ran across you folks yesterday and am going to use this manipulation on my 2 Autos'. Would I be good going with 12"x 1" 11 gauge staples as my anchors or another size? I've been using pipe cleaners for my LST, but know they won't be functional for this tech.
If you use the 12” one you can cut them down to size for training in smaller pots before transplanting. I use 4”-8” staples for training depending on the stage of growth and how big they are!!

This is the girls day 26 above ground. Got a nice quadline shape under all that.lol. Decided to switch the light cycle at day 24 as they're growing so rapidly and I only have a small space. All good so far.
IMG_20190612_194751_DRO.jpg
IMG_20190611_193210_DRO.jpg
IMG_20190611_193218_DRO.jpg
Looking good Vet! They both look nice and healthy
 
Back
Top Bottom