- Thread starter
- #401
Thank you, it’s a pleasure sharing. Always more coming up, too!
Stocking Up For The Apocalypse: Goody's Perpetual Grow By The Beach 2020
- Thread starter Bean Genie
- Start date
politoed
Well-Known Member
im definitely going to try those gummies and that drying method
- Thread starter
- #403
Awesome!
I use Orange for the real jello and strawberry sugar free jello. Added a few drops of vanilla this time and it’s a very tasty combo, hides the other tastes well.
- Thread starter
- #404
The indoor crew is doing well today. GelatOG clone #1 is in the dark with no water and will be cut tomorrow.
In tent 1 the Purple Lemonade seedling is coming right along. No dome, no food, no special treatment. I moved the light a foot closer and now she’s at 36k on the Lux meter. She’s got that wrinkled leaf thing just like the last one did.
And the Dr S, taking over tent 3 already. She is on 5g/G MC this week and she’s a few days into flower now.
Nothing too exciting in the tents, most of the action will be outside this week.
In tent 1 the Purple Lemonade seedling is coming right along. No dome, no food, no special treatment. I moved the light a foot closer and now she’s at 36k on the Lux meter. She’s got that wrinkled leaf thing just like the last one did.
And the Dr S, taking over tent 3 already. She is on 5g/G MC this week and she’s a few days into flower now.
Nothing too exciting in the tents, most of the action will be outside this week.
- Thread starter
- #405
This GelatOG autoflower clone has been quite the journey since rooting in July.
Mostly a lucky break, but it shows that almost anything can be done under the right conditions.
Her top clump of flowers really is a beautiful thing to behold
And overall, an interesting and fairly productive flowering
I feel lucky to have been able to document and share her journey with all of you.
And a little icing on top of the cake, she just happened to weigh 420 grams
Mostly a lucky break, but it shows that almost anything can be done under the right conditions.
Her top clump of flowers really is a beautiful thing to behold
And overall, an interesting and fairly productive flowering
I feel lucky to have been able to document and share her journey with all of you.
And a little icing on top of the cake, she just happened to weigh 420 grams
- Thread starter
- #406
The turtle boat plant (LRx #3) is longer in flowering than her soil sisters. There’s a real lack of sun here so I decided to move her (again) back inside since there’s an empty tent today.
She got a new container and a new goldfish, and she can finish with lots of light in pH’d aerated water.
I want to be able to see this experiment through to the end. And I want to get the trichomes a bit more mature- in the name of science
She got a new container and a new goldfish, and she can finish with lots of light in pH’d aerated water.
I want to be able to see this experiment through to the end. And I want to get the trichomes a bit more mature- in the name of science
TriangleCheese
Well-Known Member
Congratz on the harvest Goody 
I'm still waiting for my longass flowering BG41 to finish. Tired of spending half of my salary on weed 
I'm still waiting for my longass flowering BG41 to finish. Tired of spending half of my salary on weed 
Yes.The turtle boat plant (LRx #3) is longer in flowering than her soil sisters. There’s a real lack of sun here so I decided to move her (again) back inside since there’s an empty tent today.
She got a new container and a new goldfish, and she can finish with lots of light in pH’d aerated water.
I want to be able to see this experiment through to the end. And I want to get the trichomes a bit more mature- in the name of science
For science.
Timhomegrow
Well-Known Member
You're my hero ha.I used the infused CBD oil today and made gummies, mostly for the GF and family that prefer medicine rather than high.
After decarbing in the oven and infusing the oil in the magical butter machine I’m ready to go- I’m using the recipe given to me by @carcass and I added a few details and the pics.
Follow along if you want
You'll need:
1 pkg sugar free jello mix (0.6 oz size)
1pkg regular (with sugar) jello mix (3 oz size)
2 packets plain gelatin
1/4 cup light corn syrup
1/4 cup water
1/2 cup infused oil (1900mg CBD, 100mg THC)
Gummy molds
Spatula or similar
Whisk or large spoon
A glove for heat
A funnel
A container to squeeze the mixture into the molds (ketchup bottle or similar)
Silicon is awesome for all of the tools.
Put all the dry ingredients in a pan, add the water and corn syrup.
Heat it on medium low heat, stirring constantly, until it just starts to boil around the edges.
All the powdered stuff should be well dissolved before adding the oil.
Add the oil and keep stirring till it just starts to boil again, then remove from the heat.
At this point, you might say "this shit aint working-the oil is just floating on top"
So, to remedy this, you keep stirring while the mixture cools just a little- as it cools it will thicken up a bit,
and the oil will start to mix in if it hasn’t already.
Once all the oil is mixed in, it's time to make some gummies...
Now, you need to hurry just a little so it doesn't set up before you get it into the molds.
Pour the mix through a funnel into a squirt bottle (put a glove on, it's hot)
Fill your gummy molds
There will be some of the mixture stuck in the squirt bottle and in the pan- you can either just wash it out, or you can eat it for a nice buzz- just don't eat too much-
Put the gummies in the freezer to cool and solidify.
After they set up, pop them out of the molds into a tupperware container, or anything with a lid that seals.
You can store them at room temp, but they get a little oily , so I keep them in the freezer.
Servings vary because of mold sizes.
This batch I made 16 large square gummies that are around 35mg each and 75 leaf gummies that are just under 20mg each.
I love this recipe it’s easy and fast.
Good luck in your kitchens and don’t be afraid to try things, it’s the best way to learn!
I came here looking for the humidity/temp controlled fan you're using and found this gem! Already have screen shots and a project for next weekend
. Magic Butter came in two weeks ago ha- Thread starter
- #410
Awesome. Glad people are using the recipe, I do PB cups too when you’re ready!You're my hero ha.
I came here looking for the humidity/temp controlled fan you're using and found this gem! Already have screen shots and a project for next weekend
Airtitan T3 if you’re looking up the fan. They have other models that maybe fit your grow better too. Nice quiet low wattage stuff, fairly inexpensive and seems to be good quality.
Timhomegrow
Well-Known Member
I ended up going with AC Infinity Cloudnine T6...same programming . Hope that and the bigger fan/ducting fix the tent heat issues. Plus a 6" will be better for the next tent ha. I'm hooked!
- Thread starter
- #412
Sounds good. Take a minute to figure out the controls once and you’ll never really have to mess with them again. So nice..
If you end up not needing it for your grow tent, it also works great for drying since it can be set to click on for high/low humidity. Clever little gadgets that just make life a bit easier, and it’s a cool looking display for your tent environment.
I have one myself...those are the Vickers knickers!
What a result. Got to be chuffed with that. Congrats on a successful experimentThis GelatOG autoflower clone has been quite the journey since rooting in July.
Mostly a lucky break, but it shows that almost anything can be done under the right conditions.
Her top clump of flowers really is a beautiful thing to behold
And overall, an interesting and fairly productive flowering
I feel lucky to have been able to document and share her journey with all of you.
And a little icing on top of the cake, she just happened to weigh 420 grams
- Thread starter
- #415
What a result. Got to be chuffed with that. Congrats on a successful experiment
Thank you, it was fun. Clone #2 still has like a week, and has turned out to be a pretty healthy little branch herself-
kind of a cool dwarf
She's awesome. I love little plants.Thank you, it was fun. Clone #2 still has like a week, and has turned out to be a pretty healthy little branch herself-
kind of a cool dwarf
- Thread starter
- #417
The PL seedling is just over 10 days old, coming along alright. She has one of those rounded stubby leaves emerging, I wonder if she will be an oddity or if it’s just a freak leaf.
Timhomegrow
Well-Known Member
How many plants do you have ha. You must spend considerable amount of time mixing nutes
- Thread starter
- #419
After this last round of cuts- I have 3 finishing outside, 4 inside. Once I’m back from my trip next week, I’ll be cutting all but 2 inside (Dr S and that PL baby) and then I have to decide what goes in next. I’ve been expanding the seed bank so now I have lots of auto options.How many plants do you have ha. You must spend considerable amount of time mixing nutes
I spend a bit of time mixing nutes but with tap water and MC it’s easy, I have it dialed in and it’s pretty fast.
The Purple Lemonade is great because I’m not even giving it food (breeder says no need) and seeing how it goes.
Everything looks great 13, and congrats on the harvest! Safe travels tomorrow and enjoy your time with @carcass 