Dankman_420
Well-Known Member
Looks good bro.
With power cost higher nowadays it's good to utilize what you can
With power cost higher nowadays it's good to utilize what you can
PotChimp's Side Projects
- Thread starter PotChimp
- Start date
Dankman_420
Well-Known Member
Are you still running HPS with hood's? Or is it just for air exchange
- Thread starter
- #8,923
The company here just upped the cost per kilowatt hour, too. If I'm lucky, I can reduce the length of the duct runs to reduce air resistance and maybe turn the fan down to the medium setting. The HIDs are closest to the plenum and that helps.
I'm running two 315w CMHs with enclosed hoods and four LEDs.
I'm running two 315w CMHs with enclosed hoods and four LEDs.
Dankman_420
Well-Known Member
Prime time rates here went up nearly 50 percent during the summer. It'll probably never go back down.
I think it's 2:00 - 7:00 pm. Just in time for them to say " stay inside with the air conditioner on" because it's not safe to breathe the wildfire smoke
I think it's 2:00 - 7:00 pm. Just in time for them to say " stay inside with the air conditioner on" because it's not safe to breathe the wildfire smoke
- Thread starter
- #8,925
I probably toke down the equivalent of three or four wildfires a day in blunt smoke, so I'm not too worried..... 
- Thread starter
- #8,926
Mendocino Channel Kush x Mendocino Purple Kush - 1st plant:
2nd plant:
3rd plant:
MPK S1:
Nevil's Haze:
2nd plant:
3rd plant:
MPK S1:
Nevil's Haze:
- Thread starter
- #8,927
Another Mendocino Channel Kush x Mendocino Purple Kush from a previous grow:
Critical Kali Mist:
Two Mendocino Purple Kush S1 plants; one being genetically off:
Original Amnesia:
Pineapple Skunk:
Critical Kush:
Man, that shelf/closet I built is taking forever to take apart. I forgot that I glued and nailed it in a bunch of places and it's solid as Hell. I'm most of the way done, though. Maybe by tomorrow I'll have it all done.
Critical Kali Mist:
Two Mendocino Purple Kush S1 plants; one being genetically off:
Original Amnesia:
Pineapple Skunk:
Critical Kush:
Man, that shelf/closet I built is taking forever to take apart. I forgot that I glued and nailed it in a bunch of places and it's solid as Hell. I'm most of the way done, though. Maybe by tomorrow I'll have it all done.
- Thread starter
- #8,928
Dang; Killer A5 Haze seeds are back in stock..... 
Well, the front of my one shoe is floppin' like an alligator's jaw, and the other one is torn all the way down the side, so it looks like it's a good time to invest in some marijuana seeds. I should get me some Super Malawi Haze seeds, too. Duct tape'll hold my shoes together for a while; I got a roll out in the garage.
Well, the front of my one shoe is floppin' like an alligator's jaw, and the other one is torn all the way down the side, so it looks like it's a good time to invest in some marijuana seeds. I should get me some Super Malawi Haze seeds, too. Duct tape'll hold my shoes together for a while; I got a roll out in the garage.
You can always cut up an old tire and fashion some straps from the harvested stalks to make some sandals! 
- Thread starter
- #8,930
Those look too high class for a chimp like me. 
- Thread starter
- #8,931
You'd get robbed walking around Danger Island in a fancy pair of shoes like that. Or pestered to death by panhandlers.
TaylorMade420
Well-Known Member
Love it man don't think I've got time to read all but, defo remember d
The name pot chimp! Been a while.
The name pot chimp! Been a while.
- Thread starter
- #8,933
How's it going? It has been a while. I've been here pretty much the whole time, too.
Looking great in there Chimp!
- Thread starter
- #8,935
Thanks. My veg tents aren't looking as good, though. Those are getting overcrowded and the plants are getting too close to the LEDs.
That Neville haze looks great brother.
I grab a pack from Swami on Greg's nl#5 x nl#5 x Haze.
So, the male is basically a Neville haze? Really stoked to see yours bro..
Any input would be greatly appreciated
Cheers
I grab a pack from Swami on Greg's nl#5 x nl#5 x Haze.
So, the male is basically a Neville haze? Really stoked to see yours bro..
Any input would be greatly appreciated
Cheers
- Thread starter
- #8,937
Here's what somebody else said on another website. Somebody was bragging up Mr Nice's NL5 x NH and he threw in on the subject.
The best Northern Lights 5 x NH around, is held by Swami. He has the old school 1991 NL5 x NH. If you're after the real thing, go to Swami's Organic Seed Co. He also has a couple genuine 1988 RKS crosses.
The best Northern Lights 5 x NH around, is held by Swami. He has the old school 1991 NL5 x NH. If you're after the real thing, go to Swami's Organic Seed Co. He also has a couple genuine 1988 RKS crosses.
Thanks brother! It's hard pulling information on his strains online. Not much documentation from grow journals but decided to roll the dice.Here's what somebody else said on another website. Somebody was bragging up Mr Nice's NL5 x NH and he threw in on the subject.
The best Northern Lights 5 x NH around, is held by Swami. He has the old school 1991 NL5 x NH. If you're after the real thing, go to Swami's Organic Seed Co. He also has a couple genuine 1988 RKS crosses.
- Thread starter
- #8,939
Here's my old carbon filter air plenum The top cracked and sunk in when the cookie tin I have the 8" filter on slipped out of under from vibration of the fan motor. I put a towel around it for now to keep it airtight;
Here's the new one I built. I'll put something more solid in the bottom to raise the air filter up to the fan. There's two 6" holes for ductwork on each side, and two more in the back for 4" ductwork; six altogether:
Same deal; the fan sits on top. That top comes off (I figured the weight of the fan and weatherstripping all around the top seal will keep it airtight). I have to get some duct tape before I finish it up.
The top cracked and sunk in when the cookie tin I have the 8" filter on slipped out of under from vibration of the fan motor. I put a towel around it for now to keep it airtight;Here's the new one I built. I'll put something more solid in the bottom to raise the air filter up to the fan. There's two 6" holes for ductwork on each side, and two more in the back for 4" ductwork; six altogether:
Same deal; the fan sits on top. That top comes off (I figured the weight of the fan and weatherstripping all around the top seal will keep it airtight). I have to get some duct tape before I finish it up.
Dankman_420
Well-Known Member
Looks much better than the other one
My 8" hydro farm fan is a loud MF. How's the noise from your's
My 8" hydro farm fan is a loud MF. How's the noise from your's