ganjazz
Well-Known Member
You need to have a bit of height on them to get the full benefit of the spectrum of the light.....
Im actually happy with how its going now but gonna follow your advice
How To Use Progressive Web App aka PWA On 420 Magazine Forum
Note: This feature may not be available in some browsers.
You need to have a bit of height on them to get the full benefit of the spectrum of the light.....
If I were you I might consider the 96x3 reflector. The coverage are might be better suited to your grow area.
Hello sara, i sent you email regarding my order. For the led i am gonna use another relay timer and see.
Sarah,
I think you would like to know. Within a grow space that is 53.34cm square and is 1.6m tall. I am getting a 10,240 lux reading, from the 48pcs x 3w reflector light I bought recently, at 1.24m above the floor. I have had to raise the light unit because the lights where bleaching the fan leaves with the unit hanging at 45cm.
I Know there are too many factors to point out any single one as the cause but I am getting ready to cut my best grow yet under 4 of these in a 4x4. Nugs so heavy everything is now laying all over each other....... Same strain same nutes just changed the lighting in this tent......... They may not be fancy but I KNOW they work
High CO FinestThat sounds truly strange, because my 48*3W is 1-8cm from the canopy and there is no sign of bleaching, even at the bud site that is almost touching the light. I veg'd for 35 days, so this little monster of a plant (indica) took over the whole 40x40x120cm space and there is simply no more room to lift the light any higher. Luckily it doesn't seem to matter much because the plant is very happy and the reflector isn't nearly hot enough to cause any burns.
Here's what it's looking like at the moment:
Not that strange at all, one main thing left out is some strains react different then others. I have many that love as much light as I can give them and some that want me to put sun block on them lol Also humidity level and plant stress can affect this in flower. Knowing your plants and adjusting light is one key for happy,tasty and sweet smelling buds. Awesome growing you have done keep it growing green
Woo, sexy girlsJust a few pics from this AM.
Here is the flower tent under the 900. These girls will all be getting a good defol in a few days.
Here is a pic of my Blue Blood. She should be big when she is done.
And lastly, here is what is going on in the veg tent. Sleestak Skunk is re-vegging after showing her sex. The little clone is a Super Silver Haze and the two seeds that have not shown their heads yet are Heavyweight Dream Machine and Dr Krippling Incredible Bulk.
What Co said... I have grown strains that can literally sit on the M-H lights and others that literally start curling at 12"... and I know I have said it a bunch of times but truly... you should not be worrying about how close your girls can get without burning them but how far they need to be to get the benefit of the full spectrum... Of course if your girls grow to tall you have a bit of a problem but I try and train my girls to stay low....
Hi Sara I've just taken some LUX readings of both your Mars II 1600w and your Reflector series 96x3's. I'm not sure if you deliberately downplay the lumen output of these lights (especially the Mars II 1600w) as part of a marketing ploy, so that every customer is happier than they expected but let me tell you that I was pleasantly surprised! If you would like to check out my results and have anything you would like to add please feel free to drop into my Plushberry clones grow in my signature and check it out.
All the best everyone, have a great weekend
except the person you found in the bar last night
Ok party people, we've finally had a chance to sit down and open these problem fixtures up. I'm really happy with everything I've found too!
You can see that the relfectors are being held up with not a stud, but a plastic screw and nut. While this sounds like a great way to fasten them, they obviously loosen up in shipment. All of the lenses I have drooping or falling off are missing the nuts and/or the studs!
Normally I would think this was an acceptable fastening and prefer it, but I have to say, a bare stud with a spring steel nut would probably be more cost effective as well as handle shipping better. A simple fix!
Sara, I'll follow this up with an email, but if you could just ship me a bag of studs and nuts, I can fix this pretty quick
As far as the rest of the fixture goes, I'm very impressed with the build quality. Almost too much so! It's not easy to separate the back panel from the front because of the cabling. The three that go from the drivers to the boards do have quick disconnects (code required, but still nice to see) but for security, they each have a ty-wrap holding them together, nice touch!
So far, she's loving the light, I can't wait to get the other hanging up there too!
Healthy green all,
MT
Thank you Kriazejust placed her under reflector150w, go girl
My 4 other girls have more space now,
Have to install fans, intake,make scrognet and finish doors, than growroom is ready
Also must find,make something for change distance led.
GreatLooking like a sweet setup there ganjazz, clean and discreet. You might want to consider making a journal so that other people can join you in your grow. All the best
The main point of my post is to give Sara, the lux reading within my particular grow space.
Just for the sake of giving more information about my particular grow space:
Wall material/color: Dry Wall/ Matte white
Temperature: 25 degrees Celsius (with light on and both switches flipped to the on position)
Humidity: 50-55%
Grow medium: Humus soil mixed with compost
Container: 11.4L Smart Pot
Nutrients: Bio-Canna and additional molasses.
Water: Single pass carbon filtered tap water
thought you just wanted the Lux #'s in general....
Hey Sara!
Ive read a good deal of posts about different LED lights and I am leaning towards getting a MarsII, I do have a couple questions if you dont mind.
I have a fairly small grow tent, 36"x36"x72". Could you tell me if I would be better off with a MarsII, or a Mars reflector unit. I have read that the MarsII will produce slightly more heat than the reflector unit does. But, I am not really worried about heat being an issue as I have a decent ventilation exhaust system.
IF you think the MarsII would be better for me, would you recommend the 400w unit or the 700w for the size space I have.
I dont mind investing more in a unit if it is a good one.
really I appreciate any info you can give me!
High Goldensack, the mars II and reflector lights are designed differently. Mars II uses better components than reflectors,I have a 900 in my flower tent and 2 400's in my veg tent.
how big is your veg tent? you may have already seen my other post, but what do you think about the Mars reflector144x5w its less expensive than the MarsII700w and has more wattage, as well as the added bonus of veg and flower switch(which i think is cool )
Consdering that your tent is 9 feet (3x3) and going by the 45-50w/square foot rule, i would say you need the 700w mars hydro minimum. I believe a 900w Mars hydro (consuming ~450w real watts) would be great.
Just added fan + scrognet
And send mail
I have 2 Mars-Hydro 3x3x6 tents side by side. Feel free to look in my links at the bottom of my signature.
Thank you supergroomer.Hey friends,
I have almost the same question. Except my tent is 1.5 feet X 2.5 feet (30x18in). I have almost got myself a Mars II 400W then looking at the reflector series I have to wonder.
I would like to keep the heat down. I currently have 2-250Watt CFL (one red and one blue). So I am very eager to get a LED.
My biggest concern is keeping the price below 250usd.
Cheerz all.
If I were you I might consider the 96x3 reflector. The coverage are might be better suited to your grow area.