Mars-Hydro LED Grow Light Discussion

[GrimReefer83]

Ok Sara. I got some work done today.

I put up extraction fan, carbon filter, fan and 2 Mars Pro II Epistar 80.

Next step is to move the plants into the autopot system and put up the two other 80's.
We're getting somewhere.

Meet Big-Bud & Pure Power Plant - Sara may remember them when they were babies in skulls

Now they are 155 days old, starting to become root-bound and I think it's time to flower them. Just need to transplant them to my autopot system

Bro love the skulls, what size are they?! Should enter the Plant Challenge I've got a thread for at the moment, best Auto only grow in 18oz or smaller container!

 

[Mars Hydro]

just keep the PCB board dry will be better.

I don't see how it could get wet with the heat that comes off of them and the fans and my fans ....i strongly believe that they will be fine ...there had to be moisture getting in there with the glass on because it was fogging up .

 

[Mars Hydro]

my mistake,the website is right. Yes,all of our lights are using 5w diodes now.For a 4'x4' area,the Reflector192 will be better,compare with the Mars II 900.May i know when you gonna place order?

Thanks sara! I have a 4x2x5 tent. But will be upgrading to a 4x4 sometime down the road. The mars 2 real wattage is 195 for Veg setting?? Mars hydro wedsite says 268w for veg? Is that wrong? Also, they both use 5w diodes?

 

[Mars Hydro]

Bro love the skulls, what size are they?! Should enter the Plant Challenge I've got a thread for at the moment, best Auto only grow in 18oz or smaller container!

 

[Mars Hydro]

Marshydro official website accept Bticoin now,if you do not want have bank record of buying growing stuff,try Bitcoin payment.
Mars , Led grow light , Mars Hydro

 

[KevinL]

OK thank you sara for that info! I think you have helped me make my decision !! Lol I will be ordering the new light before the end of the month. Lol can't wait to start using it!!!

 

[Skullman420]

They were imported from China (The pots) the other skulls were ordered from Ukraine and is modelled after real people. so they're about the same size as a real human skull.

Bro love the skulls, what size are they?! Should enter the Plant Challenge I've got a thread for at the moment, best Auto only grow in 18oz or smaller container!

 

[SRFS]

Guys I'm looking for an LED panel 300w to do 2 plants in a small closet best for veg and flowering?

 

[Dabby Duck]

Hey Sarah. Any idea if my lights have shipped. Still says processing in my end.

 

[Mars Hydro]

It's my pleasure.and may i know how many plants you gonna keep there?

OK thank you sara for that info! I think you have helped me make my decision !! Lol I will be ordering the new light before the end of the month. Lol can't wait to start using it!!!

 

[Mars Hydro]

international growing room,haha

They were imported from China (The pots) the other skulls were ordered from Ukraine and is modelled after real people. so they're about the same size as a real human skull.

 

[Mars Hydro]

the Mars 300 draw power around 135w,can cover 2'x1.5',it's full spectrum.
You can also check more lights on our official website:

Guys I'm looking for an LED panel 300w to do 2 plants in a small closet best for veg and flowering?

 

[Mars Hydro]

Please PM me your order NO or email address,i can check for you.

Hey Sarah. Any idea if my lights have shipped. Still says processing in my end.

 

[Mars Hydro]

Is there anyone found this thread is 4 years old now? Mars-hydro are here 1460days,35040hours.... how many posts you have here?We have 34403posts and 2294page so far….. Happy 4th anniversary！！！
(send email to sales18@lgledsolutions.com to get thanksgiving coupon code)

 

[Dabby Duck]

Just got the email from mars that they shipped. Thanx Sarah you have really been great. I can't wait for these lights. I think I have done well so far. But these lights are gonna up my game for sure.

 

[Mars Hydro]

My pleasure.yeah,your girls are doing well at your growing room so far.

Just got the email from mars that they shipped. Thanx Sarah you have really been great. I can't wait for these lights. I think I have done well so far. But these lights are gonna up my game for sure.

 

[Mars Hydro]

Mars Pro II series:flexible PCB board,easier to change by yourself

For LED lights,after sometimes the diodes will fade,or some other situation may happen which caused your light damage,you need to send your light to repair.Usually,it will take times to deliver to/from the repair service.But cannabis growing,plants are very sensitive to lights,they can not grow without lights for very long.

For Mars Pro II series lights,you do not need to worry about that.We install the lights with small PCB group design,it's easy to disassemble and intall the PCB board.If one of the diodes went out,you only need to change that small section which have problem.Meanwhile,one section have problem,it will not affect other sections.
And the only tool you need is a screwdriver,no need welding or some other tools,it’s easy for everyone to repair the light by themselves at home.

This is save you and your plants lots of time,will minimize the loss of your growing to the lowest.

 

[Skullman420]

Happy 4 year on the forum Mars-Hydro

 

[tryan2grow1]

To those that wish to thank Mars-Hydro for being such an awesome sponsor here is a link to post our kudos......Thank you Mars-Hydro and especially SmokeSara. What a wonderful rep they have.

Thank You To Our Renewing Sponsor Mars-Hydro

 

[Skullman420]

I can vouch for that statement. I just got to test out their customer/repair-service and it was as easy as Sara describes. On the Pro series you only need a screw-iron to fix your own lamp in your own home. Very easy. Wrote a review of the experience exactly the way it happened here

Mars Pro II series:flexible PCB board,easier to change by yourself

For LED lights,after sometimes the diodes will fade,or some other situation may happen which caused your light damage,you need to send your light to repair.Usually,it will take times to deliver to/from the repair service.But cannabis growing,plants are very sensitive to lights,they can not grow without lights for very long.

For Mars Pro II series lights,you do not need to worry about that.We install the lights with small PCB group design,it's easy to disassemble and intall the PCB board.If one of the diodes went out,you only need to change that small section which have problem.Meanwhile,one section have problem,it will not affect other sections.
And the only tool you need is a screwdriver,no need welding or some other tools,it’s easy for everyone to repair the light by themselves at home.

This is save you and your plants lots of time,will minimize the loss of your growing to the lowest.