Duggan Does Kosher Kush With DBHBB: 4 Plants, Two Pots, Lots Of LEDs!

Good morning Duggs. Been dreaming about that MLI since your last run, mmmmm mmm. I think I'll pack a bag and vaccum it down on the food-saver, thanks for the assurance Ziggs.



Sent from my computer: using my fingers & an occasional thumb, but mostly fingers....that's how I roll :rollit:
 
36Gr0w said:
I forgot to mention the solution to my problem before. You can get vacuum sealers for mason jars, that way the buds aren't pressed together. Its on my list for summer purchases so I don't have to borrow my buddies.
Click to expand...

I have the attachment for the ball jars..10 bux from the place that is a River in South America :thumb:
 
36Gr0w said:
I forgot to mention the solution to my problem before. You can get vacuum sealers for mason jars, that way the buds aren't pressed together. Its on my list for summer purchases so I don't have to borrow my buddies.
Click to expand...

36G, hey brotha, ya i wanna get one of those too.How much $? How does that work with curing bud....do ya cure them in the jars , then when you like it, use that thingy, after it's all cured and nice. Glad to see you around anyhow 36G. Was busy today at work (go figure) so couldn't spend too much time replying, but i'm glad to see some cheer and chit, chat when i'm not around....not used to that at Dugg's.
Light came today....gorgeous, very well made in the USA! Ya baby!! Fu..n eh! Same build quality as the Budmaster...they are very similar.Have a look ....took a few squares.:volcano-smiley:
KK_s_with_new_light_003.jpg
KK_s_with_new_light_004.jpg
KK_s_with_new_light_005.jpg
KK_s_with_new_light_006.jpg
KK_s_with_new_light_007.jpg
KK_s_with_new_light_009.jpg
KK_s_with_new_light_010.jpg
KK_s_with_new_light_011.jpg


Hopefully all the spectroms are covered....and there's enough of them....hell, maybe i'l move that wall over a couple feet...:slide: See if i can get that elusive 32 zips. Highest yield from this room , was with two MK-Ultras at 25.5 z's. I need a bigger room! Anyhow i had to use another circuit and separate timer for this new light.I also added another thermometer cuz ...get this...the one i've had for yrs....can't see the mercury anymore...:tokin: A lil faded perhaps...:grinjoint: Just want to check temps...before was 77F, lots of air movement, above and below. Have a great night...oh, and all you Americans....watch out tonight ....he's gonna be out....that's right ...watch out....the "Seed Ball Bandit" just may be in your neighborhood. He's got his trusty slingshot....where's plaid...dodges, in , and out ,,around ,...and over, you missed him, ya , ya did...he's gone, just like a ninja...he's Ziggy, the "Seed Ball Bandit" muuahaha!:rofl::rofl:
 
I've used it after it doesn't need burped, for long storage and curing. Works great for that. Your room and plants look great, go for a few extra feet after harvest, more grow space is always great!

They actually sell slingshots and seeds, my nephew is getting one for his 9th birthday Sunday. I hope our bandit visits my place, I always like more plants lol. Have a good one duggs, enjoy the Stella and steller smoke.
 
duggan said:
36G, hey brotha, ya i wanna get one of those too.How much $? How does that work with curing bud....do ya cure them in the jars , then when you like it, use that thingy, after it's all cured and nice. Glad to see you around anyhow 36G. Was busy today at work (go figure) so couldn't spend too much time replying, but i'm glad to see some cheer and chit, chat when i'm not around....not used to that at Dugg's.
Light came today....gorgeous, very well made in the USA! Ya baby!! Fu..n eh! Same build quality as the Budmaster...they are very similar.Have a look ....took a few squares.:volcano-smiley:
KK_s_with_new_light_003.jpg
KK_s_with_new_light_004.jpg
KK_s_with_new_light_005.jpg
KK_s_with_new_light_006.jpg
KK_s_with_new_light_007.jpg
KK_s_with_new_light_009.jpg
KK_s_with_new_light_010.jpg
KK_s_with_new_light_011.jpg


Hopefully all the spectroms are covered....and there's enough of them....hell, maybe i'l move that wall over a couple feet...:slide: See if i can get that elusive 32 zips. Highest yield from this room , was with two MK-Ultras at 25.5 z's. I need a bigger room! Anyhow i had to use another circuit and separate timer for this new light.I also added another thermometer cuz ...get this...the one i've had for yrs....can't see the mercury anymore...:tokin: A lil faded perhaps...:grinjoint: Just want to check temps...before was 77F, lots of air movement, above and below. Have a great night...oh, and all you Americans....watch out tonight ....he's gonna be out....that's right ...watch out....the "Seed Ball Bandit" just may be in your neighborhood. He's got his trusty slingshot....where's plaid...dodges, in , and out ,,around ,...and over, you missed him, ya , ya did...he's gone, just like a ninja...he's Ziggy, the "Seed Ball Bandit" muuahaha!:rofl::rofl:
Click to expand...



I dont wear plaid, duggan.
sorry.



:rofl:


Good luck on your Killer Kilo of Herb Kwest :)

your lights look serious...;)
 
Hey!!....it wasn't my idea ...blame Shiggs for that one. He wanted "the bandit" wearing plaid...:rofl::rofl: Pissin brotha...OK, OK...no plaid...we'le keep it black...like a ninja...:laughtwo: Talkin about that...Ziggs , how they doin...you checked .:high-five:
 
duggan said:
Hey!!....it wasn't my idea ...blame Shiggs for that one. He wanted "the bandit" wearing plaid...:rofl::rofl: Pissin brotha...OK, OK...no plaid...we'le keep it black...like a ninja...:laughtwo: Talkin about that...Ziggs , how they doin...you checked .:high-five:
Click to expand...

nothing visible yet from the throws..The regular ocurring stuff is just starting to break through last years leaves and needles :thumb:
 
Holy wall of light Duggan, this is exactly the way to combat the terrible foot print associated with all LEDs. When manufactures figure that out, it will be a game changer.

Can't wait for these babies to flower out. Looking phenominal in here!
 
That's a seriously nice LED panel ya got there Duggan! :bravo:

Great company, perfect footprint for your space ... very nice! :thumb:
 
Canyon said:
Good morning,

I have been looking for a large pot high brix grow to follow. This looks to be a good one and it's just starting. I even have KK plants going.

Subbed and watching.

Best
Click to expand...

Hey Canyon. I'm doing a Jock Horror scrog in a large pot using Doc's kit. Just a single plant grow, but you may find it interesting. Link in signature.

I am way bad late to the show Duggan. Don't know how I missed the start of this journal. I'm only on page 1 right now, but I'll catch up fast.
 
duggan said:
yeti, ya with the fan/filter combo the most important thing is to slightly oversize the combo.This way you don't have to have the thing blasting away to get the job done know what i mean . Most of the time growers will get what will do the job , but forget that , ...that's running at near 100% , so it noisier, and everything doesn't last as long. My filter was supposed to last up to 18 months of constant operation.....i've had it now for 3yrs. i think. it's because i change the pre-filter often and only pull thru it with the fan at around 75% thru a speed controller....but NOT below 70 ....way too hard on the motor windings to run slower than that. (Electrician :grinjoint:)
You can use that Can Fan with their Can filter...i would! The important thing is to properly match the combo and to slightly over size them.Cheers Yeti!:high-five:
Click to expand...

Duggan...

I'm running my Vortex through a 5amp Variac to control speed. Does the 70% warning still apply? I've never heard that before. I'm running around 60% I think.
 
masonman said:
Hey Canyon. I'm doing a Jock Horror scrog in a large pot using Doc's kit. Just a single plant grow, but you may find it interesting. Link in signature.

I am way bad late to the show Duggan. Don't know how I missed the start of this journal. I'm only on page 1 right now, but I'll catch up fast.
Click to expand...

Morning Mason, that's very cool of you to join in for the ride. It won't take ya too long to catch up. They're just starting bloom as of last week, so should get interesting from here on out. Anyhow , pull up a chair by the cooler and vapes and get comfy....just don't drink all my Stella's...I have to make sure I have a couple on hand for the "Seed Ball Bandit' when he peels thru here....:tokin: Have an awesome day Mason , and gang!:circle-of-love:
 
masonman said:
Duggan...

I'm running my Vortex through a 5amp Variac to control speed. Does the 70% warning still apply? I've never heard that before. I'm running around 60% I think.
Click to expand...

That's pushing it a little Mason...try and keep it at 70% at least. Ya, with these motors and fans , they are ok to run at a reduced speed , but not too slow...it's very hard on the windings inside the motor. Without getting into theory behind it...trust me, try and go up to at least 70% if you can OK! It's my 30 + yrs. as an Electrician , just trying to help out the Gang with tips on that sort of thing eh! Cheers my brotha!
 
The new setup looks great! I bet you join the Kilo Club with the way it is now. Congrat's!
Two pages in one day!
:bravo:
 
KK's got a drink tonight (four days ) , back pot got it's second CD at 20mls/4 gal's. distilled W/Tea. Front pot got the OG Drench at same strength , and with Tea. I'm seeing a few tips curling up , burnt. This is going on , in both pots...just a lil so far. Sometime tomorrow or the next day i'm gonna give em some Destress W/ WayX10. Have a great night everyone.
 
Back
Top Bottom