CraZysWeeD
Well-Known Member
Setup the pots like Meanwell states in their instructions about this.
Don't Panic, It's Organic! Jump In Everytime
Setup the pots like Meanwell states in their instructions about this.
Vike
Active Member
Doesn't come with any. There are plenty others like Ledgardeners instructions. Just curious how Teleon decided to do it but nevermind he didn't use the ones with the possibility of adding a pot.
- Thread starter
- #803
Teleon
Well-Known Member
Wont recommend to add both on 1 Poti...
They even dont recommend that in the manual
"3 in 1 dimming function (for B/AB-Type)
·Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
·Direct connecting to LEDs is suggested. It is not suitable with additional drivers.
·Dimming source current from power supply:100 µA (typ.)"
There are always no written manual with the Meanwell drivers, just have a look at the website
And if u read correctly I have one HLG-60H-AB, where I added the Poti.
They even dont recommend that in the manual
"3 in 1 dimming function (for B/AB-Type)
·Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
·Direct connecting to LEDs is suggested. It is not suitable with additional drivers.
·Dimming source current from power supply:100 µA (typ.)"
There are always no written manual with the Meanwell drivers, just have a look at the website
And if u read correctly I have one HLG-60H-AB, where I added the Poti.
CraZysWeeD
Well-Known Member
Just like Teleon said manual is online... 
- Thread starter
- #805
Teleon
Well-Known Member
Something is coming soon.... 
CraZysWeeD
Well-Known Member
Acrylic
- Thread starter
- #807
Teleon
Well-Known Member
CraZysWeeD
Well-Known Member
Printing?
- Thread starter
- #809
Teleon
Well-Known Member
Update
~Day 11 in Veg, the Bruce Banner has a few days more, but I'll top her in the next days. The G13 Haze stays normal, otherwise it would get too crowdy in my little tent. But since they are in the 9L Airpots with the 2 Biotabs in each pot they are doing great, also added today some more bacteria and a bit from my left over BioBizz BioHeaven, which is mostly just macro and micro nutes...had very good experience in the past with it.
Lamp runs since 21.01.2021 at 8A/20V - so 160W, will increase it to 9A on Sunday.
Bruce Banner:
G13 Haze #1:
G13 Haze #2
still optimizing 
No, will start printing this weekend 
@Vike What's up dude?
-Teleon
~Day 11 in Veg, the Bruce Banner has a few days more, but I'll top her in the next days. The G13 Haze stays normal, otherwise it would get too crowdy in my little tent. But since they are in the 9L Airpots with the 2 Biotabs in each pot they are doing great, also added today some more bacteria and a bit from my left over BioBizz BioHeaven, which is mostly just macro and micro nutes...had very good experience in the past with it.
Lamp runs since 21.01.2021 at 8A/20V - so 160W, will increase it to 9A on Sunday.
Bruce Banner:
G13 Haze #1:
G13 Haze #2
still optimizing No, will start printing this weekend @Vike What's up dude?
-Teleon
Vike
Active Member
Update
~Day 11 in Veg, the Bruce Banner has a few days more, but I'll top her in the next days. The G13 Haze stays normal, otherwise it would get too crowdy in my little tent. But since they are in the 9L Airpots with the 2 Biotabs in each pot they are doing great, also added today some more bacteria and a bit from my left over BioBizz BioHeaven, which is mostly just macro and micro nutes...had very good experience in the past with it.
Lamp runs since 21.01.2021 at 8A/20V - so 160W, will increase it to 9A on Sunday.
Bruce Banner:
G13 Haze #1:
G13 Haze #2
@Vike What's up dude?
-Teleon
Nothing much, been "fixing" my Ender 3 as one of the axis is making noise and causing layer gaps. Maybe the rollers are worn out or something.Update
~Day 11 in Veg, the Bruce Banner has a few days more, but I'll top her in the next days. The G13 Haze stays normal, otherwise it would get too crowdy in my little tent. But since they are in the 9L Airpots with the 2 Biotabs in each pot they are doing great, also added today some more bacteria and a bit from my left over BioBizz BioHeaven, which is mostly just macro and micro nutes...had very good experience in the past with it.
Lamp runs since 21.01.2021 at 8A/20V - so 160W, will increase it to 9A on Sunday.
Bruce Banner:
G13 Haze #1:
G13 Haze #2
@Vike What's up dude?
-Teleon
Soldered the 100K pots to the drivers but haven't tried to fire it up yet. When I tried adjusting the voltage from the internal pot now that didn't change at all
It was like 20.2V on both drivers. Other than that I took out the big res and made a shorter table for the flood tray. Got me 10-15cm of extra space I needed and I can still drain it to a smaller box.
1 month in flower and it's starting to smell amazing and feel like all the work is worth it in the end.
I never buy weed to smoke so I'm starting to drool over these things. All except 1 out of 16 plants are going to have some big colas judging how they are starting to fill up the stems. Can't wait.
CraZysWeeD
Well-Known Member
- Thread starter
- #812
Teleon
Well-Known Member
Hey there 
quite a long time without any post, a lot happened and also the laws changed so it isnt a problem to grow here
I'll will post a few new updates this week, got a hole room for growing now and a 1mx1mx2m tent where easily 5 plants fit, instead of my 3 before ^^
so, stay tuned
quite a long time without any post, a lot happened and also the laws changed so it isnt a problem to grow here
I'll will post a few new updates this week, got a hole room for growing now and a 1mx1mx2m tent where easily 5 plants fit, instead of my 3 before ^^
so, stay tuned
- Thread starter
- #813
Teleon
Well-Known Member
Soooooo.....
I got a lot to tell, I inherited the house from my Grandparents - it was build in 1876 but still in good shape. Got a lot of space for all my projects but also everything needs a lot of time for maintenance, so I'm quit busy all the time.
For the growing I have a whole room, it's the anteroom for my Sauna and it's one of my outbuildings.
This grow I have 5x Barneys Farm mimosa x orange punch, all 5 seeds where still okay after ~2years in my fridge - I germinate them with 2x kitchen paper in a dark place and all popped.
I updated my lamp also for the bigger growing area - now we have 6x 96x Samsung LM301B and 2x Osram Horticulture red stripes for flowering.
Also I test for the edges great new lightbulbs from Osram, I got 4x Osram LED lightbulbs which have 7,2W at 1521 Lumen, what means they have 211 Lumen/W - which is just great, also due the EU regulations they should hold 50k hours, what is insane for such a cheap addition. So 6.084 Lumen more for just 28,8W.
Here some pics, enjoy
Thats all what I use for them at the moment for growing, later on the Fish-Mix will replaced with some BioTabs ferts
So far, keep u all updated
I got a lot to tell, I inherited the house from my Grandparents - it was build in 1876 but still in good shape. Got a lot of space for all my projects but also everything needs a lot of time for maintenance, so I'm quit busy all the time.
For the growing I have a whole room, it's the anteroom for my Sauna and it's one of my outbuildings.
This grow I have 5x Barneys Farm mimosa x orange punch, all 5 seeds where still okay after ~2years in my fridge - I germinate them with 2x kitchen paper in a dark place and all popped.
I updated my lamp also for the bigger growing area - now we have 6x 96x Samsung LM301B and 2x Osram Horticulture red stripes for flowering.
Also I test for the edges great new lightbulbs from Osram, I got 4x Osram LED lightbulbs which have 7,2W at 1521 Lumen, what means they have 211 Lumen/W - which is just great, also due the EU regulations they should hold 50k hours, what is insane for such a cheap addition. So 6.084 Lumen more for just 28,8W.
Here some pics, enjoy
Thats all what I use for them at the moment for growing, later on the Fish-Mix will replaced with some BioTabs ferts
So far, keep u all updated
CraZysWeeD
Well-Known Member
True electricians power management! Though I do know you also probably have a EB protective circuit somewhere in the house. 
The salads look terrific btw
Nice seeing you in here again!
The salads look terrific btw
Nice seeing you in here again!
- Thread starter
- #815
Teleon
Well-Known Member
Yeah, noTrue electricians power management! Though I do know you also probably have a EB protective circuit somewhere in the house.
There is no EB protection, but it's secured with some overvoltage and lightning protection ^^The salads look terrific btw
thanks Crazy - Thread starter
- #816
Teleon
Well-Known Member
Hey there
Just a little Update after a while The ladie's are looking very good - 2 of them are nice wine-red/ purple due to the low temps in the night. When light is on the temp in the room is at ~20°C, at night ~14-15°C, depending on the outside temp here.
Will have a look that the temp in the night won't go under this
Btw I have no clue which flowering day we have - I'll have a look on the Trichoms anyway, they tell it
So far, Teleon
Just a little Update after a while
The ladie's are looking very good - 2 of them are nice wine-red/ purple due to the low temps in the night. When light is on the temp in the room is at ~20°C, at night ~14-15°C, depending on the outside temp here.Will have a look that the temp in the night won't go under this
Btw I have no clue which flowering day we have - I'll have a look on the Trichoms anyway, they tell it
So far, Teleon
- Thread starter
- #817
Teleon
Well-Known Member
Newest Update
/
Congrats on being legal my friend.Newest Update
/
Garden is amazing, such beautiful ladies.
Love your work.
Stay safe
Bill284
- Thread starter
- #819
Teleon
Well-Known Member
Congrats on being legal my friend.
Garden is amazing, such beautiful ladies.
Love your work.
Stay safe
Bill284
Thanks a lot
I'm also very very happy with the ladies this time, and of course that I have a whole room for that only Saw your thread with the VIVOHUT stuff, looks nice but for me here 420 Mag is loading sooo slow atm, not that much fun when trying to read a hole thread, especially when there are a lot of pics
Next year I'll update the room with some CO2 control, that should be a good addition
So far, Teleon
The VIVOHUT is a custom built year round growing facility.Thanks a lot
Saw your thread with the VIVOHUT stuff, looks nice but for me here 420 Mag is loading sooo slow atm, not that much fun when trying to read a hole thread, especially when there are a lot of pics
Next year I'll update the room with some CO2 control, that should be a good addition
So far, Teleon
After the fire I'll never grow in the house again.
Just curious do you have a smoke detector in your grow area?
Adding CO2 was fairly simple in my grow room and was well worth the minor cost.
I can shut the exhaust and circulate the CO2 with the heat.
It was a great upgrade with excellent results.
I recommend it highly.
Stay safe
Bill284