Costanza's 2nd Grow Of 2022

Costanza said:
Here are some lights off pics. You can really see the frost with the leds off.
20221012_190508.jpg
20221012_190502.jpg
20221012_190454.jpg
Click to expand...
That looks awesome, frosting up nicely! Ong the kief ur gonna get if you use a trimbin kinda bin,
 
Costanza said:
Here are some lights off pics. You can really see the frost with the leds off.
20221012_190508.jpg
20221012_190502.jpg
20221012_190454.jpg
Click to expand...
You give me the shivers when you take that much foliage. ;)
But your process works for you so what do I know. :rofl:
Absolutely perfect as usual, no worries about air circulation.
Should be great for the final few weeks.
Hope everything is going well today.
Take care. :ciao:




Stay safe
Bill284 :cool:
 
Bill284 said:
You give me the shivers when you take that much foliage. ;)
But your process works for you so what do I know. :rofl:
Absolutely perfect as usual, no worries about air circulation.
Should be great for the final few weeks.
Hope everything is going well today.
Take care. :ciao:




Stay safe
Bill284 :cool:
Click to expand...
Yeah I have the tendency to go a little overboard.
 
they are looking sweet I bet they are stinky now too aren't they? The Buds below the top net, are they still getting light thru the top canopy? I have to work on my placement I think my net should be a bit lower. They look so organized Im looking forward to see yours with some nice big frosty Buds
 
Savvage61 said:
they are looking sweet I bet they are stinky now too aren't they? The Buds below the top net, are they still getting light thru the top canopy? I have to work on my placement I think my net should be a bit lower. They look so organized Im looking forward to see yours with some nice big frosty Buds
Click to expand...
Yes the reason I defoliate so much is so the lower level buds inbetween the 2 scrogs get enough light. I keep the top leaves on each cola and remove the middle fans blocking the lowers. I did go a little overboard on this one like I always do even though I tell myself I'm not going to hahaha. I like to be able to see all the lowers when looking down on the canopy. I'm sure many growers would disagree with this but I'm not your average grower I march to the beat of my own drummer
 
Day 29F Its funny how a few days ago it was mentioned about leaves changing colors and how they usually do this at the end. Well what do ya know I wake up yesterday and the apes in space and dreamsicle are turning purple. I raised my light to 100% intensity for a total of 710w up from the 450w I ran on the last grow. Gonna keep feeding the 321 formula for another week and then start a pk boost around day 35 starting with . 6g of monopitassium phosphate to give these buds some bulk so I can hopefully meet my goal of 2lbs in this tent. I cant get good pics on this phone the lights really mess with the color the phone camera doesn't do these plants justice

20221015_092715(0).jpg
20221015_092711.jpg
20221015_092708.jpg
20221015_092656.jpg
20221015_092630.jpg


20221015_092701.jpg
 
Nothing like waking up to fresh pot porn, the look so awesome, they could give a old man a woody with out Popping a little blue pill :rofl: (I know TMI ) they look great, and a little purple hi-lite only makes it better. I know we have a ways to go, But I am hoping you cover your drying and curing @Bill284 and a few other have been coaching me for end game. I have been going thru a nightmare, It is taking me 6 months to get rid of the Bale of fresh hay smell.
we basically have the same set up .other than I envy your 750 watt light.:thumb: Im still at 450 and a Bestva 265 watt Burple light. but I have the 4x4 tent to dry in along with 8 - 1/4 lb Grove bags and 3 dozen wide mouth mason Jars and other assorted glass and a few dozen Boost packets. so I really hope you include that part in your journal
Looking good my friend , GROW ON!!!:goodjob:
 
Savvage61 said:
Nothing like waking up to fresh pot porn, the look so awesome, they could give a old man a woody with out Popping a little blue pill :rofl: (I know TMI ) they look great, and a little purple hi-lite only makes it better. I know we have a ways to go, But I am hoping you cover your drying and curing @Bill284 and a few other have been coaching me for end game. I have been going thru a nightmare, It is taking me 6 months to get rid of the Bale of fresh hay smell.
we basically have the same set up .other than I envy your 750 watt light.:thumb: Im still at 450 and a Bestva 265 watt Burple light. but I have the 4x4 tent to dry in along with 8 - 1/4 lb Grove bags and 3 dozen wide mouth mason Jars and other assorted glass and a few dozen Boost packets. so I really hope you include that part in your journal
Looking good my friend , GROW ON!!!:goodjob:
Click to expand...
Its funny because the dry and cure was my weakest area of growing and last grow I got it done to where I'm confident that its gonna be perfect. I hang the whole plant to dry until the stems start to crack I keep my temps between 65-68f and humidity as close to 60rh has I can get it. I cut them into 1 foot segments and place in Turkey bags put a twist tie on the top and place them in the black and yellow plastic storage bins then I lower my temps as close to 60f as I can get and keep rh at 60 in the room where the bins are stored. Each day I will open the bins and open the bags in the bins for 10 to 15 minutes and then I will take the bottom branches and kind of rotate them with the tops to try and keep an even moisture level for all the buds so you dont have one branch that's drier than the next. After about 5 days of this I remove the buds from the stems and place them right back into the Turkey bags in the bins and repeat the process of opening the bin and the bag for about 10 days after that. The following week I trim a little bit each night and place the trimmed buds into grove bags and place the grove bags into my wine fridge set at 55 to 60f and with a little backing soda in a container at the bottom of the fridge I can keep the rh in the 55 to 65 range and I get a perfect cure with this method. I started with a 450w led and I was gonna get a 650w but saved some money and kept the 450 In there and added a 260w for the 710 total it smes to be making a difference but the heat is a bit higher and living in the northeast mother nature can't decide If she wants to stay warm or get cool so it's a struggle at the moment and I have to keep the tent open and the grow room door open to help cool it off since I refuse to hook up my portable ac until next summer the electric bills were insane
 
I really need to invest in a new phone the camera on this crappy Samsung phone doesn't do these plants any justice. The pics where the leaves appear darker and greener are what they really look like not the lighter photos I always seem to get a glare from the leds
 
I got a Samsung s21 and you are so right, the pics I take never look like my plants really do. not only the colors but the sizing is also deceiving. Talking about picture. if ya dont mind I want to get your opinion if I should get rid of some spots/area s of potential Larf.
have a good evening
BTW your plants are kickin Azz
 
@Savvage61, I want something similar to what you have to keep the sides of the tent from collapsing inwards.
Preferably something affordable but sturdy enough to hold a fan and be easily dismantled.
I don't understand why tent manufacturers aren't selling some. I know people on etsy sell 3d printed clamps but I haven't run into anything similar on amazon other than these. Maybe I'm overthinking it and should just zip tie some pvc? Just seems like a nuissance when it comes time to take down the tent. "16mm Plant Trellis Connector Clip"

1665879984019.png
 
LMAO I thought you were talking to me for a minute and I'm stoned off my ass right now looking through my pics thinking wtf I don't remember having those in my tent hahaha
 
Regrowth said:
@Savvage61, I want something similar to what you have to keep the sides of the tent from collapsing inwards.
Preferably something affordable but sturdy enough to hold a fan and be easily dismantled.
I don't understand why tent manufacturers aren't selling some. I know people on etsy sell 3d printed clamps but I haven't run into anything similar on amazon other than these. Maybe I'm overthinking it and should just zip tie some pvc? Just seems like a nuissance when it comes time to take down the tent. "16mm Plant Trellis Connector Clip"

1665879984019.png
Click to expand...
I got 2 set of 4x4 crossbar 8 bars total from Gorilla Grow tent real cheap 19 bucks a set I dont think they are a sponsor but you can google it just like that a very wise investment
 
Thanks. That looks perfect.
It seems the LITE CFM Kit (16mm) would be compatible with Mars or VIVOSUN poles.
Think they can support a fan? You can answer in your / my thread or DM if u want so we don't bug Costanza.
edit: I wish amazon carried them. I'm in Canada.
 
Costanza said:
LMAO I thought you were talking to me for a minute and I'm stoned off my ass right now looking through my pics thinking wtf I don't remember having those in my tent hahaha
Click to expand...
I did that the other day my self I had a inline fan pumping cool air with the exact same hose/vent it took me a while but then I was like WTF I put that hose in storage, wait,,, That aint my tent lol. I have some question but im stoned so im gonna wait till tomorrow
 
Regrowth said:
Didn't mean to hijack your thread. lol. Your plants look great. :love:
How are the roots doing? Are they filling the reservoirs?
Click to expand...
All good I don't mind hijack away. The roots are insane they completely filled in the res I'll take some pics tomorrow morning when lights go on
 
Back
Top Bottom