ChemDawg D BX 3
- Thread starter PotChimp
- Start date
Hey Man the buds look yummy hey I didn't notice the gigantic joint this year
I heard rumor you wasn't gonna do it I guess it was true?
Just busting your balls man I can imagine the yearly choking smoking those lol
Happy New Year Brotha Pc
I heard rumor you wasn't gonna do it I guess it was true?
Just busting your balls man I can imagine the yearly choking smoking those lol
Happy New Year Brotha Pc
- Thread starter
- #1,043
Thanks, b.real and happy new year to you CHH everybody else too 
I smoked a 4.20 oz. doob on April 20th, 2013 and a 42.0 gram doob on April 20th, 2014. Here's a pic of the one I did last year if that's the one you're talking about:
Here I am the year before:
I'm thinking of trying to melt 4.20 grams of dab this year I was going to do it with an empty 40 gallon aquarium turned upside down and supported on both sides to catch all the vapors I'll cut a piece of cardboard to fit the top of the aquarium then cut a hole the size of my head in that. The second hole I cut will be for the vapors to go up into the aquarium through. I just have to figure out how to melt bigger dabs like that so it don't take me all day
I smoked a 4.20 oz. doob on April 20th, 2013 and a 42.0 gram doob on April 20th, 2014. Here's a pic of the one I did last year if that's the one you're talking about:
Here I am the year before:
I'm thinking of trying to melt 4.20 grams of dab this year I was going to do it with an empty 40 gallon aquarium turned upside down and supported on both sides to catch all the vapors I'll cut a piece of cardboard to fit the top of the aquarium then cut a hole the size of my head in that. The second hole I cut will be for the vapors to go up into the aquarium through. I just have to figure out how to melt bigger dabs like that so it don't take me all day
there was a video of a massive dab they used a titanium plate
just a thought
just a thought
- Thread starter
- #1,045
I should go with the aquarium idea, get me a bunsen burner setup and a glass bowl big enough to put the 4.20 grams of earwax in, then adjust the height of the bowl to the burner, check the glass bowl with a temp gun (like they did with the titanium plate), and when it's right, throw the whole dab in it and vape, keeping my head in the aquarium until I don't smell anything. 
shit you may pass out from lack of oxygen 
yea I forgot you did the big joint on 420 day lol
I guess gotta wait till next april
yea I forgot you did the big joint on 420 day lol
I guess gotta wait till next april
- Thread starter
- #1,047
The mother rejects, overfed and heat stressed (this other unit I transferred them to puts the light further away, so the heat problem should be solved but damage done):
I know they have about a month to go, but I don't like what I see here:
The mother looks the same except there's pollen everywhere and I haven't had the nerve to open the door except to water and feed it
I know they have about a month to go, but I don't like what I see here:
The mother looks the same except there's pollen everywhere and I haven't had the nerve to open the door except to water and feed it
- Thread starter
- #1,048
Last Chemdawg D BX 3 clone chopped: Left jar - 1.35 oz. of buds, right jar - .35 oz. cola. Total - 1.7 oz. I smoked 3 fatties from it and by God they were fatties too
I'm chopping the next clone of it today and a White S1 clone in about 2 days All 5 mother rejects, the last two CDDBX3 clones in flower, and the first mother I chose but replaced are under the 600 watt HPS together so I can start growing more weed 'cause dis chimp smokes 'em as fast as he chops 'em!
All aboard the Red Eye Express!!!!!
I'm chopping the next clone of it today
and a White S1 clone in about 2 days All 5 mother rejects, the last two CDDBX3 clones in flower, and the first mother I chose but replaced are under the 600 watt HPS together so I can start growing more weed 'cause dis chimp smokes 'em as fast as he chops 'em! All aboard the Red Eye Express!!!!!
- Thread starter
- #1,049
It's in the jar!
I only got two plates like that, so I don't think I'll get as much as the one I just chopped. The next clone of this is gonna be getting the chop in about two or three weeks. The smallest clone I have of it is picking up a little; I'll probably take a cutting off the clone I just put into flower about 2 weeks ago. Post more pics soon.....
I only got two plates like that, so I don't think I'll get as much as the one I just chopped. The next clone of this is gonna be getting the chop in about two or three weeks. The smallest clone I have of it is picking up a little; I'll probably take a cutting off the clone I just put into flower about 2 weeks ago. Post more pics soon.....
Yeah, but that's 2 plates of some mighty fine looking bud Chimp. Congrats...
Things that make you go
I'll always wonder if the year they corked that bottle was a good one or not.....
Things that make you go
its looking fine, I don't care what you say
Congratulations on your harvest!
- Thread starter
- #1,053
Thanks guys Yeah B A R, I was thinking of putting a fake label on the next good bottle I get for stealth purposes Write "Liquid Lazy-Be-Gone" or "Boyfriend Liking Fluid" on it she'll leave it alone.....
Yeah B A R, I was thinking of putting a fake label on the next good bottle I get for stealth purposes Write "Liquid Lazy-Be-Gone" or "Boyfriend Liking Fluid" on it she'll leave it alone..... - Thread starter
- #1,054
Hee hee a packed house
In the lower left is the last CDDBX3 clone to suffer from the bad nutes. It wasn't very bad at first, but deciding not to flush these when I realized what the problem was might not have been the best idea; over time they got worse and the last one is looking bad. In the middle is a small CDDBX3 clone I put into flower not too long ago. The whole right side is the 5 mother rejects showing signs of overfeeding (I'm thinking maybe that Happy Frog is meant as a feeding free medium for plants; nothing I planted in the mix of 1/3 HF to 2/3 SSM#4 and also fed looks healthy). The plant in the back left is the first mother I chose and is showing the same signs of overfeeding but I haven't been giving it much liquid nutes:
Close-ups of the next chop:
The newest CDDBX3 clone to go into the flowering unit:
The first mother I chose, but put aside because it went back into veg when I bumped the timer switch over to continuous pushing the grow unit back into place (my best Homer Simpson impersonation - DOH!!!!!):
This is a general idea of what this breeding project is looking like (lower buds). Not really pretty but pretty frosty, and all of them look alike:
I'll post some more pics soon.
In the lower left is the last CDDBX3 clone to suffer from the bad nutes. It wasn't very bad at first, but deciding not to flush these when I realized what the problem was might not have been the best idea; over time they got worse and the last one is looking bad. In the middle is a small CDDBX3 clone I put into flower not too long ago. The whole right side is the 5 mother rejects showing signs of overfeeding (I'm thinking maybe that Happy Frog is meant as a feeding free medium for plants; nothing I planted in the mix of 1/3 HF to 2/3 SSM#4 and also fed looks healthy). The plant in the back left is the first mother I chose and is showing the same signs of overfeeding but I haven't been giving it much liquid nutes:
Close-ups of the next chop:
The newest CDDBX3 clone to go into the flowering unit:
The first mother I chose, but put aside because it went back into veg when I bumped the timer switch over to continuous pushing the grow unit back into place (my best Homer Simpson impersonation - DOH!!!!!):
This is a general idea of what this breeding project is looking like (lower buds). Not really pretty but pretty frosty, and all of them look alike:
I'll post some more pics soon.
looking good getting close Pc 
- Thread starter
- #1,056
Thanks CHH man I wish I would have been patient on that first mother I know she was a better choice. I can always backtrack and redo generation 5 by saving pollen from the father and revegging the mother. I'm on the fence fifty-fifty on the decision right now; I knew that I would have to do it sooner or later with as few parents as I use each time. The mother of the seeds doesn't have enough hairs 
- Thread starter
- #1,057
I jarred the next CDDBX3 clone up this morning 1.65 oz. not bad I might make me some dab out of it.
I might make me some dab out of it.
Hey Chimp, not bad at all. I can still picture you running around with that hat on your head germinating... LOL
- Thread starter
- #1,059
Works good too!
- Thread starter
- #1,060
I just noticed that it's been a while since I posted a note or pics here. Everything except the parents in my breeding project and a withered 3" tall CCCBX3 clone is in my night time unit, so I won't take pics now. Here's notes on everything until I get to that.
As I said, the clone is withered; about a 30% chance it'll take, IMHO. The father in the breeding project is dead, as I planned. As soon as the mother had enough pollen, I quit watering it (about 2-3 weeks ago). All of the breeding project has 11 weeks and 1 day of 12/12; even though the original mother went back into veg, it looks almost ready too. And I'm 90% towards the decision of revegging that original mother (using a father from this next generation of seeds) to finish this first part of my project off.
I topped the mother rejects to keep them from getting too tall, but then realized that cutting the plants in half wasn't actually topping them They grew big nugs at the end of the secondary branches and most of the stems are weak so the branches are falling over. I guess once a grower starts doing decent at the growing part the next thing comes height and size control, then branch support. I don't have enough bamboo rods so they're leaning all over the place.
The next CDDBX3 clone to chop will be really soon; maybe later this week or sometime next week That'll leave me with the one that's been in flower 3 weeks and 5 days.
At this point the only plant I'm going to feed is that last mentioned clone; the small one hasn't taken yet, as I said earlier. And if I don't redo generation 5, I am going to start the second part of this project, which is stabilizing a second strain of Chem D dominant pot to cross with. The second strain is going to be C4DD (an underground breeder named Verdant Green), which if I remember right is an elite Chem D clone mother and a Chem D/Chem 4 cross father (Rez).
Post pics soon.
As I said, the clone is withered; about a 30% chance it'll take, IMHO. The father in the breeding project is dead, as I planned. As soon as the mother had enough pollen, I quit watering it (about 2-3 weeks ago). All of the breeding project has 11 weeks and 1 day of 12/12; even though the original mother went back into veg, it looks almost ready too. And I'm 90% towards the decision of revegging that original mother (using a father from this next generation of seeds) to finish this first part of my project off.
I topped the mother rejects to keep them from getting too tall, but then realized that cutting the plants in half wasn't actually topping them
They grew big nugs at the end of the secondary branches and most of the stems are weak so the branches are falling over. I guess once a grower starts doing decent at the growing part the next thing comes height and size control, then branch support. I don't have enough bamboo rods so they're leaning all over the place. The next CDDBX3 clone to chop will be really soon; maybe later this week or sometime next week
That'll leave me with the one that's been in flower 3 weeks and 5 days.At this point the only plant I'm going to feed is that last mentioned clone; the small one hasn't taken yet, as I said earlier. And if I don't redo generation 5, I am going to start the second part of this project, which is stabilizing a second strain of Chem D dominant pot to cross with. The second strain is going to be C4DD (an underground breeder named Verdant Green), which if I remember right is an elite Chem D clone mother and a Chem D/Chem 4 cross father (Rez).
Post pics soon.