Bailed & Back, HPS, Soil, Perpetual, Multistrain, 60x60x72

Well I turned off fans and gave a slight mist to increase humidity for a few hours before lights on, but I forgot to turn them back on and they taco'd up a bit. I decided to just lower them and accept the less light penetration until the 2 GC are done around the 25th, I saw a few Amber's but wasn't checking calyx's.
I was mostly counting mites and eggs I saw and checking for damage. Not much of anything but I did find 1 egg and 1 husk? On the pulled leaf in the kryptonites pan. I sprayed it with some pyretherine .02% to see how the egg and husk react in an hour.
20180731_125629.jpg
20180731_125641.jpg
 
I tried to get some free nutrient samples as I've been using roots organic for a while now. Was hoping for some small samples of base nutrients but got turned down on each request. Needless to say I won't be using those nutrients ever. I was told to talk to my local store, vyt I already did that and they told me to ask the suppliers directly. Unless your a big name or company they could of cared less. The fact that they replied was nice but still won't make me pay to try some nutrients. I won't be sending customers there way, and I set up alot of medical growers in the area who take my advice 90% of the time and the 10% that don't is because I give them plenty of options to think for them selves and research.
 
I got 2 of these sprayers for 5 bucks a piece. I put clean distilled water at a 6.5 ph in one for misting and keeping pests uncomfortable and the other for my water and DE muc spray. The mix broke my cheap sprayer in a few pumps but this sprayer seems to be great. The pressure seems lacking but I don't exactly need pressure from it
20180801_174241.jpg
 
I don't have a good microscope so I can't show any pictures of the trichromes unfortunately, but I just checked them and the GC is 100% cloudy and just a few amber on the top calyx's. The sugar leaves have quite a bit so I might be flushing these girls a week sooner.
 
So it's hard to get my humidity above 30 percent when I'm not tending it. I am dumb and finally moved the humidifier into the 5x5 tent but with so much exhaust 'half throttle' I fear 1 will be to little. If i had 2...I could run a reservoir to keep the 1 gallon tank(s) 'current' full. I would need a dehumidifier in the winter though. So I could switch the flow and hook up my ac also dehumidifier and set it to fill my reservoir so I wouldn't have to empty it so often. The battle makes me want to lower the lamp to 600 or 750 and move the plants within 15 inches.
 
Checking out 420 sponsors and top of the list is Ace seeds. Looking at the strains and finding some good looking plants, but what really impresses me is the detail for some strains. I've used Ams and the info is minimal and only 1 picture. But with ace seeds I was looking at Violeta and they have a full printout of cannabinoids and terpenes profile. My only negative is the popup keeps coming in Spanish when I'm on an English setting. I like the deals to 100 euros gets ya 10 free seeds plus free shipping it looked like. That was a euro right? Lol
 
Thanks, just day to day atm, I transplanted a couple plants over and also took the caps off my 3 GC clones. I might throw them in early and let my 10 gallon girls get thick .
Green crack interests me but i haaate the name and it really puts me off lol
 
I took my 2 grams of honey oil and set it in a shot glass I bought with 2 grams in it of some super lemon haze. I put that in a pot of water on medium low heat for 30 minutes letting it bubble and purge the butane as much as possible. After that I added some food grade propylene glycol at about 1/.75 ratio and got enough to fill cartridge for my vape pen and this :)
20180803_180829.jpg
20180803_180806.jpg
 
Here is my take on super cropping but on the main stalk. First attempt at this so there is no data or name for this but I hope to increase the total uptake for the plant. Simply pinch lightly on the young stalk, you dont need to feel any damage when you do it just knoww that the stalk is being pressured and damaged slightly. I did this for about a week and then left it alone. Hoping good things :)
20180805_145704.jpg
20180805_145805.jpg
 
Here's some pics of my setup I'm using and what I'll be doing coming up
20180710_131618.jpg
Hello MLG,
I noticed the bar holding the light is sagging. If you lash that bar to the two bars above it running perpendicular, that will provide much more support for your light. Just my two cents.
 
Back
Top Bottom