Skybound
Well-Known Member
It's best to share one or more pictures, but generally speaking, a plant that's been in veg 6 weeks is plenty grown to go into bloom and I'd say she'll give you roughly 4-8 ounces dried if using HID or maybe LED.
Ask Us Anything: Sharing Knowledge 420 Style
It's best to share one or more pictures, but generally speaking, a plant that's been in veg 6 weeks is plenty grown to go into bloom and I'd say she'll give you roughly 4-8 ounces dried if using HID or maybe LED.
I did not use any light just natural sunlight. That's the 3 of my plant I'm thinking of trying to trust nature. I have no tools to grow.
For vegetative period I used CFL light, so I need to switch it to LED for flowering?
Skybound
Well-Known Member
You don't need to, but more lumens = more bigger buds, so we tend to put our best foot forward when it comes to our bloom lights. If CFL is all you have, by all means proceed, but if you have more intense lights ....
Simon de Montefort
New Member
Hello everyone, i got a question too 
I´m currently growing my 1st Photos, i grew Autos before. I send them to flower yesterday after 69 Days of Veg. I did install some Sensors to my Plants which give me Information about Temp, Moisture lvl in the Medium and EC in the Medium. They also do measure Light intensity in umol/s, but thats not that important to me. I kept using them for a while and figured out the Sensors readings when the Plant needs to be watered. My Problem is, my Sensors readout tells me to water now, and my experience tells me that the Plant will be droopy and underwatered soon. Now, because i´m living in a warm area, Lights are on during Night because of Temps, but i need to Water now. I will post some Pics below where you can see the Sensors readout, but my question is, does it hurt my Lady if i open the door and gave her a feeding or is that a huge Problem cause of the Light? I´m feeding after what Harley Smith says, and in this Point there is a high demand in extra P at this Point. I also need to raise K a lot to reach my wanted NPK. So i don´t want her to wait too long for it cause in my Eyes this is the Point where nothing should go wrong or it will diminish my Harvest. Sorry for my Bad English
Moisture readout, just lost 2% in 8 Hours. Normal rate is about 1% per Hour at 26°C and 50% Humidity
EC readout, normally loosing arround 10-15 us/cm per hour
Can i open my Door and Water without doing harm to my Ladys or should i wait another 5 hours till the Lights turn on?
I´m currently growing my 1st Photos, i grew Autos before. I send them to flower yesterday after 69 Days of Veg. I did install some Sensors to my Plants which give me Information about Temp, Moisture lvl in the Medium and EC in the Medium. They also do measure Light intensity in umol/s, but thats not that important to me. I kept using them for a while and figured out the Sensors readings when the Plant needs to be watered. My Problem is, my Sensors readout tells me to water now, and my experience tells me that the Plant will be droopy and underwatered soon. Now, because i´m living in a warm area, Lights are on during Night because of Temps, but i need to Water now. I will post some Pics below where you can see the Sensors readout, but my question is, does it hurt my Lady if i open the door and gave her a feeding or is that a huge Problem cause of the Light? I´m feeding after what Harley Smith says, and in this Point there is a high demand in extra P at this Point. I also need to raise K a lot to reach my wanted NPK. So i don´t want her to wait too long for it cause in my Eyes this is the Point where nothing should go wrong or it will diminish my Harvest. Sorry for my Bad English
Moisture readout, just lost 2% in 8 Hours. Normal rate is about 1% per Hour at 26°C and 50% Humidity
EC readout, normally loosing arround 10-15 us/cm per hour
Can i open my Door and Water without doing harm to my Ladys or should i wait another 5 hours till the Lights turn on?
Id wait myself, not worth stressing them
Simon de Montefort
New Member
HigherTheHigh
Well-Known Member
hello everyone!
is it possible to bottom feed from my pot saucers?
running 20L pots and my scrog is 10" above pots.
flipped them yesterday to 12/12.
thanks!
is it possible to bottom feed from my pot saucers?
running 20L pots and my scrog is 10" above pots.
flipped them yesterday to 12/12.
thanks!
Imhigh85
Well-Known Member
Volcanic ash in Round Rock is it worth using with my cannabis plants or is it going to be a waste of my time has anybody ever tried to use volcanic ash in their soil if so please tell me how you did it and if you have done it multiple different ways it would be great to know if it would be water soluble used more like T if anybody can answer this question or even give me part of the answer this question it would be great I appreciate it very much this is something I have not tried and I am willing to try
hello everyone!
is it possible to bottom feed from my pot saucers?
running 20L pots and my scrog is 10" above pots.
flipped them yesterday to 12/12.
thanks!
You dont want them sitting in water all the time
Lilolme
Well-Known Member
Right in the middle of my first grow, this just saved me a lot of time and trouble
Ttopper710
New Member
I'm having a problem with ants any organic suggestions
Do you have any pics?
It should be fine .
the end yield would be more if you left it go say another 2-3 weeks as the more mature the plant, bigger buds more potent plus the strength of stems is good if the plants got small stems the buds will need propping up, if you could get some pics That'd b nice good look .
ohioboy
Well-Known Member
Anyone know about light specifics? I have been buying marshydro lights as I get more space but am seeing other lights cheap and stronger they say but I can't tell because I don't have the knowledge
should I get this 1000 watt led for $87 or a 300 watt led marshydro for $89 the pics are the specs for the 1000 watt unbranded/generic
Id want to see what the unbranded is drawing from the wall, even it says 1000w that deosnt mean that it really is. At least we know what the Mars lights will do.
ohioboy
Well-Known Member
Ac85-265v ? Is that it?
GrimReefer83
Well-Known Member
More curious than concerned, not sure what's happening, thinking it might be cold related or a deficiency.. is in a dwc and is outdoors, Cyco A&B nutes, CalMag and Ben. Bacteria. They went 8ish days without a feed / change of water. New to DWC.
PH 6.0
PH 6.0
ohioboy
Well-Known Member
Well I got $100 and need as much light as possible any suggestions
GrimReefer83
Well-Known Member
Mars Hydro 300w, best bang for buck, short and long term
ohioboy
Well-Known Member
I've got 4 of them (mh 300's)and was going for 5 when I saw this other light did you see just a few posts up check it out and see if you still say the same
