Virgin Ground And The Little Star Asterion
- Thread starter Virgin Ground
- Start date
- Thread starter
- #3,342
It would make sense to you if you knew what I look like.
Killably severe. No, I can see that...
- Thread starter
- #3,344
I'm just going to ask you questions all day long. Just short little ones to make you come back. I'm nice like that. Lol.
I'm going to use a foil pack. What is decarb for thc? I also have a 1:1 to decarb. Do you decarb differently for CBD??
I do the same for both, and according to my Candida test results, it worked well.
I do 240ºF for 80-90 mins in the foil pouch, to allow for heat transfer through the metal.
I do 240ºF for 80-90 mins in the foil pouch, to allow for heat transfer through the metal.
- Thread starter
- #3,346
- Thread starter
- #3,347
My light was off. It was still set to 11-13.
I think it was off for about three hours so it's no biggie. Just glad that I noticed now.
My rh was at 99%. Froggy ( humidi) is working overtime. It was practically raining in my tent. The fog rolled out when I opened the door. Lol.
Just gotta tweak it.
Qb is set on high at 26". I'll lower it a bit in about 12 hrs. I'd rather have them a touch stretchy rather than burnt. My starter light is only 24 watts and the 4000k HLG is 90 watts.
The Cheese looks a bit droopy. They aren't ready to be watered yet. It must be from the crazy rh spike and stronger light.
I think it was off for about three hours so it's no biggie. Just glad that I noticed now.
My rh was at 99%. Froggy ( humidi) is working overtime. It was practically raining in my tent. The fog rolled out when I opened the door. Lol.
Just gotta tweak it.
Qb is set on high at 26". I'll lower it a bit in about 12 hrs. I'd rather have them a touch stretchy rather than burnt. My starter light is only 24 watts and the 4000k HLG is 90 watts.
The Cheese looks a bit droopy. They aren't ready to be watered yet. It must be from the crazy rh spike and stronger light.
candycane
Well-Known Member
Omg I LOVE your shirt!! The babies are looking beautiful 
- Thread starter
- #3,349
Thanks Candy.Omg I LOVE your shirt!! The babies are looking beautiful
Which shirt? The 420 one or the marshmallow. The marshmallow one is a dog hoodie I got for my pup.
He hates it, of course. Lol
candycane
Well-Known Member
Lol both! The 420 shirt and the Dog hoodie that I thought was also a shirt at first.- Thread starter
- #3,351
I've got my G13 ready to decarb.
Don't know if I'm supposed to break this stuff up more than it is.
WWSD? (What Would Shed Do?)
Don't know if I'm supposed to break this stuff up more than it is.
WWSD? (What Would Shed Do?)
Allen42
Well-Known Member
I’ve always broke it up a little bit before decarbing personally, I would break those up just a wee bit...looks like your gonna make an awesome batch of edibles... how much butter will you be using? I love ediblesI've got my G13 ready to decarb.
Don't know if I'm supposed to break this stuff up more than it is.
WWSD? (What Would Shed Do?)
- Thread starter
- #3,353
Lol. It looks really good but it's full of mold. One of the reasons why I was hesitant to break it up further. This batch is going to be made into a topical.
Tomorrow is when I'll be making oil for edibles. Hopefully I'll be making capsules soon after.
I think when I made butter last, it was 1/2 oz per cup.
Allen42
Well-Known Member
Oh sorry I didn’t read earlier into thread. But nice, I’ve never made a topical cream before so I can’t say what’s best for making that. The ones from the dispensary help with the aches and pains very well though, should be a worthwhile experiment..those don’t look moldy from a glance, that’s a bummer sorry to hear that. I’ve always just tossed my moldy buds in the past.. thanks for the new idea! Lol
Lol. It looks really good but it's full of mold. One of the reasons why I was hesitant to break it up further. This batch is going to be made into a topical.
Tomorrow is when I'll be making oil for edibles. Hopefully I'll be making capsules soon after.
I think when I made butter last, it was 1/2 oz per cup.
- Thread starter
- #3,355
I couldn't see the mold until I broke them open. I louped the buds to make sure and could see the moldy cottony fluff inside.Oh sorry I didn’t read earlier into thread. But nice, I’ve never made a topical cream before so I can’t say what’s best for making that. The ones from the dispensary help with the aches and pains very well though, should be a worthwhile experiment..those don’t look moldy from a glance, that’s a bummer sorry to hear that. I’ve always just tossed my moldy buds in the past.. thanks for the new idea! Lol
@InTheShed is the member who put a silver lining on my misfortune. He has recepies for balms and lotions as well.
- Thread starter
- #3,356
I decarbed 60 grams. I ended up using slightly less than three cups grapeseed oil.
I'm doing an 8 hour run @160°, unless instructed otherwise.
I'm doing an 8 hour run @160°, unless instructed otherwise.
- Thread starter
- #3,357
Boveda challenge....
Looks interesting.
They sent me an email. Waiting to see the next steps in the process.
Not accepted yet.
Looks interesting.
They sent me an email. Waiting to see the next steps in the process.
Not accepted yet.
Shed would not break them up. How long a decarb did you do? With moldy buds I would run them at least 90 minutes at 240º F.
That's the first run. Leave it out overnight (or in the fridge if you have room), and then run another 8 hours at 160º tomorrow. Sunflower lecithin has been recommended for topicals as well over in Magnus' topical thread, though I don't know what it feels like on your skin.
What is the boveda challenge? Break it open and see if you can eat a teaspoon of it?
N420
Well-Known Member
Yup then you dump a bucket of ice water on your head then eat a tide pod lol
Heavenly Hybrid
Well-Known Member
After you eat a tablespoon of cinnamon!