Absolutely! I was just calculating the ppm for the solution he made. If you put 5g epsom in 7L of water your Mg ppm are down at more reasonable 71. Still have to add that to whatever is in the other nutes though.
And if he used only half a litre of the original 5g to 1.5 litre solution wouldn't that reduce the 5g figure by two thirds before the 7 litre dilution?
Or have I gone to far?
 
6 weeks for the Cheeses and day 25 for the WWxNL. I've decided tomorrow they'll get 12 hours darkness.

Grabbed a few pics before the lights came on.
PXL_20230319_202458034~2.jpg
PXL_20230319_202330061~2.jpg


Blue Cheese
PXL_20230319_202428111~2.jpg
PXL_20230319_202410015~2.jpg
PXL_20230319_202402574~2.jpg


Mac N Cheese
PXL_20230319_202421827~2.jpg
PXL_20230319_202349765~2.jpg


White Widow X Northern Lights
PXL_20230319_202355707~2.jpg
 
Today I've topped the res up with 5L of feed. Bumped the calmag up to 0.75ml/L. Didn't want to jump to double the dose. I'll see how they respond to that before making any more moves.
PXL_20230321_215255098~2.jpg

Yesterday I said the light was at 18", but today the Mac N Cheese is 16" away. I had a feeling she'd shoot up. If it wasn't for the rust spots the Blue Cheese would be perfect in my eyes. Grows beautifully. The WWxNL unfortunately looks like she's taking a beating. Wish I had space to set her up in a 2x2 and nurse her back to health in veg.
PXL_20230321_215242872~2.jpg


Blue Cheese
PXL_20230321_215344968~2.jpg

PXL_20230321_215308004~2.jpg


Mac N Cheese
PXL_20230321_215351972~2.jpg
PXL_20230321_215357962~2.jpg

PXL_20230321_215406334~2.jpg


WWxNL
PXL_20230321_215325312~2.jpg
PXL_20230321_215340239~2.jpg
 
WWxNL will get through this. :hug:
She does seem to be settling down. New growth is still a bit yellow, especially on the tips, but overall she's looking much happier.

The Cheeses are looking pretty happy too. Not perfect, but happy. The Mac N Cheese seems to have much longer internodal spacing. Not sure if it's the genetics or lighting. For some reason her side of the tent does get slightly lower readings on the photone app. Pretty sure the light is dead centre and level but I guess it can't be. I'm very slowly tweaking it up now. A little over 50% right now. I think in the next few days I'll put it up higher and have to turn the power up a bit. I'm out of adjustment on the ratchet hangers so will have to loop the hanging wire carabenas over the end frame poles and clip them back on the hanger wire. It jumps the light up a fair distance. I'll put some pics up when I do it. I'd like the hanging kit wires to be shorter but it's not a deal breaker. To me it makes sense to have them as short as possible.

PXL_20230322_221843892~2.jpg
PXL_20230322_221829484~2.jpg
 
She does seem to be settling down. New growth is still a bit yellow, especially on the tips, but overall she's looking much happier.

The Cheeses are looking pretty happy too. Not perfect, but happy. The Mac N Cheese seems to have much longer internodal spacing. Not sure if it's the genetics or lighting. For some reason her side of the tent does get slightly lower readings on the photone app. Pretty sure the light is dead centre and level but I guess it can't be. I'm very slowly tweaking it up now. A little over 50% right now. I think in the next few days I'll put it up higher and have to turn the power up a bit. I'm out of adjustment on the ratchet hangers so will have to loop the hanging wire carabenas over the end frame poles and clip them back on the hanger wire. It jumps the light up a fair distance. I'll put some pics up when I do it. I'd like the hanging kit wires to be shorter but it's not a deal breaker. To me it makes sense to have them as short as possible.

PXL_20230322_221843892~2.jpg
PXL_20230322_221829484~2.jpg
Vet I have a plan lol if you have a metal coat hanger use the two elbows as a hanging point then cut it in half, push the cut ends trough the light then curl with plyers. I done away with the ropes but used chains and hangers from the old CMH lights.
 
Vet I have a plan lol if you have a metal coat hanger use the two elbows as a hanging point then cut it in half, push the cut ends trough the light then curl with plyers. I done away with the ropes but used chains and hangers from the old CMH lights.
Good little DIY fix that. I don't think I've got any wire coat hangers though. I've done similar with heavy duty garden wire on a different light. Just remembered I could dig out the hangers for my XS1000 though and see if they'll do the job. They're much much shorter than the ones that came with the XS2000.
 
Good little DIY fix that. I don't think I've got any wire coat hangers though. I've done similar with heavy duty garden wire on a different light. Just remembered I could dig out the hangers for my XS1000 though and see if they'll do the job. They're much much shorter than the ones that came with the XS2000.
Yeah good shout I have them aswell I think there half the length.. love a bit of DIY me 🤣
 
Back
Top Bottom