TheDankBone
Well-Known Member
Sounds awesome man! I gotta ask, where did you learn to make cannabis infused vape juice? :O Have always wanted to try as I vape a metric-fuckton per day lol.
Some Gear No Idea - First Grow Under CFLs & LED - Candida CBD Strain
Sounds awesome man! I gotta ask, where did you learn to make cannabis infused vape juice? :O Have always wanted to try as I vape a metric-fuckton per day lol.
- Thread starter
- #222
aspiegeek
New Member
Some Gear No Idea - First Grow Under CFLs & LED - Candida CBD Strain
Haha, well I vape normally anyway, have done for last 6-years since giving up smoking. So vaping to me is a good way to go. If I smoke then I only smoke pure weed I don't mix with tobacco.
Anyway, so there's really 2 main ways of making weed vape juice.
1. Is to extract using Everclear Alcohol, the pro of this is that the finished product is stronger. But Everclear is expensive to buy & there's more risks involved when making it, specially if your like me and can't cook lol
The second method is the one I've gone for which is to make it using VG extract which is the main ingredient in ejuice. But you can take it orally too. (Don't take orally once mixed with PG!)
There's tonnes of guides online. The most in-depth guides I've found is:
Make A Small Amount Of Hash Oil With Marijuana And Alcohol
Once you've made the oil, you then mix it with VG & PG to make it vapable.
And the guide for VG
Stealth Vaping With DIY Cannabis E-Liquid — VaporBlog
Vegetable Glycerine Tincture Recipe - Health | MERRY JANE
However they missed out one very important step!! Before you go ahead and make it, you must decarb it in the oven, this explains why:
Decarboxylation of Marijuana - www.420intheKitchen.com
Although VG won't be as strong, it's cheaper to buy, safer to make and goes further. So it was a clear choice for me.
You can vape pure VG but I intent to dilute it further by adding PG which thins it out and makes it easier to vape as VG is a very thick liquid. I'll prob mix it so it's 70% VG & 30% PG but others mix 50/50. You wouldn't want less VG than 50%
Haha, well I vape normally anyway, have done for last 6-years since giving up smoking. So vaping to me is a good way to go. If I smoke then I only smoke pure weed I don't mix with tobacco.
Anyway, so there's really 2 main ways of making weed vape juice.
1. Is to extract using Everclear Alcohol, the pro of this is that the finished product is stronger. But Everclear is expensive to buy & there's more risks involved when making it, specially if your like me and can't cook lol
The second method is the one I've gone for which is to make it using VG extract which is the main ingredient in ejuice. But you can take it orally too. (Don't take orally once mixed with PG!)
There's tonnes of guides online. The most in-depth guides I've found is:
Make A Small Amount Of Hash Oil With Marijuana And Alcohol
Once you've made the oil, you then mix it with VG & PG to make it vapable.
And the guide for VG
Stealth Vaping With DIY Cannabis E-Liquid — VaporBlog
Vegetable Glycerine Tincture Recipe - Health | MERRY JANE
However they missed out one very important step!! Before you go ahead and make it, you must decarb it in the oven, this explains why:
Decarboxylation of Marijuana - www.420intheKitchen.com
Although VG won't be as strong, it's cheaper to buy, safer to make and goes further. So it was a clear choice for me.
You can vape pure VG but I intent to dilute it further by adding PG which thins it out and makes it easier to vape as VG is a very thick liquid. I'll prob mix it so it's 70% VG & 30% PG but others mix 50/50. You wouldn't want less VG than 50%
Nice reads ..
- Thread starter
- #224
aspiegeek
New Member
Some Gear No Idea - First Grow Under CFLs & LED - Candida CBD Strain
Happy new year my fellow growers .. hope everyone's half alive today lol
Some updated pics as now into week 7 of flower ....
Happy new year my fellow growers .. hope everyone's half alive today lol
Some updated pics as now into week 7 of flower ....
JoetheChro
Well-Known Member
Happy new year mate, looking nice, good start to the year or what 
- Thread starter
- #226
aspiegeek
New Member
Happy new year mate, looking nice, good start to the year or what
Happy new year bro . hope you had a good one.
Haha yeh there getting there, think another week and they maybe ready .
- Thread starter
- #227
aspiegeek
New Member
Hey guys & girls
Now starting week 8 of flower. Humidity is great and holding steady at 35%!
Girls are doing ok but Mary has got a bit of light burn
so have lifted the led up higher! (18 inches now instead of 13-inches). My bad, I've moved her under the mars more to give her a break from the more powerful light.
Some updated pics:
Now starting week 8 of flower. Humidity is great and holding steady at 35%!
Girls are doing ok but Mary has got a bit of light burn
so have lifted the led up higher! (18 inches now instead of 13-inches). My bad, I've moved her under the mars more to give her a break from the more powerful light. Some updated pics:
Attachments
Looking great my friend
Careful with tricomes pics of leaves, the degrade faster and show Amber much sooner
Shoot for the actual bud area of the cola
Very sexy bitches ya got there my friend
Careful with tricomes pics of leaves, the degrade faster and show Amber much sooner
Shoot for the actual bud area of the cola
Very sexy bitches ya got there my friend
- Thread starter
- #229
aspiegeek
New Member
Ah that's great to know thankyou I shall becareful. I noticed some amber a week or so ago.
Thanks mate, I think there doing well although a little disappointed there not fatter but I guess it's the genetics.
I'm not sure how much longer to give them, breeder says 9-weeks? What do you think?
They are CBD heavy. I waited till all the hairs where compacted pretty tight and all orange.
I never did see any Amber on my better Candida or the fully seeded little one
Yet probably pretty close, maybe start flushing soon
Attachments
- Thread starter
- #231
aspiegeek
New Member
Wow bro that's a impressive cola! I hope my next grow to achieve near that.
What week flower did you harvest?
Yeh I was thinking of starting to flush this week so there next feed onwards. I have been cutting down on the amount of nuts this week in prep.
What week flower did you harvest?
Yeh I was thinking of starting to flush this week so there next feed onwards. I have been cutting down on the amount of nuts this week in prep.
Think it was about 70-75 days...but I waited a bit longer to be sure the seeds where developed, so was Gunna pull her a week or so earlier but decided to wait
So basically right about where u are
I looked at yer cola, looks just like mine did
I'd flush and harvest her in a week ish
Yer Gunna love the smoke
So basically right about where u are
I looked at yer cola, looks just like mine did
I'd flush and harvest her in a week ish
Yer Gunna love the smoke
- Thread starter
- #233
aspiegeek
New Member
Ohhh exciting! Long as I don't fuck up the drying and curing lol although got everything ready for it.
Will start flushing .. quite glad there finishing as it's very cold weather I'm having to use the oil heater more than I'd like and that eats electric!
I have a couple of Candida seeds so will Inc 1 of them in my next grow although hoping to grow them outdoors.
I also got a CBD Critical cure as they have a lot of good reviews & a Purple granddaddy (which was a freebie) but there meant to be good for anti anxiety, plus a VCDC by Moxie seeds which is the nearest to ACDC I could get here.
Not sure I'll grow them all at once outdoors as I may have a issue with smell control lol
I have 3 Fem and 1 Male ACDC going now
SOOOOOOOOOOOOOOOOOOOOOOO excited for them, and 2 Fem and 1 Male GDP
SOOOOOOOOOOOOOOOOOOOOOOO excited for them, and 2 Fem and 1 Male GDP
- Thread starter
- #235
aspiegeek
New Member
Your so lucky to get ACDC! Let alone a male! I'd actually like to get a male ACDC then cross it with a Candida. Which in theory should provide a super high CBD plant.
I'm just hoping for some great seeds and my favorite smoke from ACDC
And lots of new Strains I'll be creating
And lots of new Strains I'll be creating
- Thread starter
- #237
aspiegeek
New Member
Sounds really good fun and be interesting to see the results .
- Thread starter
- #238
aspiegeek
New Member
Some Gear No Idea - First Grow Under CFLs & LED - Candida CBD Strain
Hey just wondering if someone can help me out with some Math. Planning on using trim to make a batch of VG but just want to get the ratio right.
Sooooo
Trim is about half as potent as bud in theory so I need to use twice as much.
Figured I'd do a small tester patch first so not to waste anything.
My math is as follows:
So 25-gram of trim to 200ML of VG
Add 50% PG into bottles makings each bottle 350MG (3.5%) strength CBD approx. (1-Gram of bud is 1000MG CBD, so let's say the trim is 2-gram=1000MG CBD. If using normal bud I'd only need 14/15 grams)
Ratio trim 1-8 VG.
Here's how I plan on making it:
Trim into dish cover dish with baking bag cover or aluminium foil to protect trim
Decarb in oven for 1-1/2 hours at 315F.
Once decarbed allow to sit for half hour whilst I warm the crockpot
Put trim into crockpot with 200ML of VG (Maybe bit more to allow for mistakes/burn off).
the crock pot to "low" for approximately 30 min and stir regularly (every five minutes or so).
Then warm setting for 12-20 hours, stirring occasionally but vigorously.
Let it cool for an hour, then strain into separate pot.
Then put into glass dropper bottles.
Mix in PG, may try 50/50 or 70VG/30PG. Making it a bit stronger.
If my math is incorrect please tell me!
Any input would be great!
Hey just wondering if someone can help me out with some Math. Planning on using trim to make a batch of VG but just want to get the ratio right.
Sooooo
Trim is about half as potent as bud in theory so I need to use twice as much.
Figured I'd do a small tester patch first so not to waste anything.
My math is as follows:
So 25-gram of trim to 200ML of VG
Add 50% PG into bottles makings each bottle 350MG (3.5%) strength CBD approx. (1-Gram of bud is 1000MG CBD, so let's say the trim is 2-gram=1000MG CBD. If using normal bud I'd only need 14/15 grams)
Ratio trim 1-8 VG.
Here's how I plan on making it:
Trim into dish cover dish with baking bag cover or aluminium foil to protect trim
Decarb in oven for 1-1/2 hours at 315F.
Once decarbed allow to sit for half hour whilst I warm the crockpot
Put trim into crockpot with 200ML of VG (Maybe bit more to allow for mistakes/burn off).
the crock pot to "low" for approximately 30 min and stir regularly (every five minutes or so).
Then warm setting for 12-20 hours, stirring occasionally but vigorously.
Let it cool for an hour, then strain into separate pot.
Then put into glass dropper bottles.
Mix in PG, may try 50/50 or 70VG/30PG. Making it a bit stronger.
If my math is incorrect please tell me!
Any input would be great!
JoetheChro
Well-Known Member
Re: Some Gear No Idea - First Grow Under CFLs & LED - Candida CBD Strain
I don't know if trim is half as potent as bud. I think (might be wrong) that there is a lot of THC/CBD concentrated in stalks and branches.
The way you're doing it sounds about right. My mate does this bit for me, I'm seeing him tomorrow, will show him your plan and see what he says?
I don't know if trim is half as potent as bud. I think (might be wrong) that there is a lot of THC/CBD concentrated in stalks and branches.
The way you're doing it sounds about right. My mate does this bit for me, I'm seeing him tomorrow, will show him your plan and see what he says?
dynamo1
Well-Known Member
Joe/aspiegeek too hot on the decarb 240 degrees 