Tunkers
Well-Known Member
Harry Potter returns.
Scrogdawgs 4 X GG#4 In RDWC Under Timber 480SAMS LED
- Thread starter Scrogdawg
- Start date
outstanding dawger, indeed,, you have already advanced to the forefront of grow technology and skill,, well done
a q pls,, i recall you posting your new setup is in a 5 x 5 tent,, and your actrual grow area is less than that,, 3 x 3.5 or similar,, so,, my q
is your lighting planned on covering a 5 x 5 space or your actual grow area, 3 x 3.5 or similar??
cheers
a q pls,, i recall you posting your new setup is in a 5 x 5 tent,, and your actrual grow area is less than that,, 3 x 3.5 or similar,, so,, my q
is your lighting planned on covering a 5 x 5 space or your actual grow area, 3 x 3.5 or similar??
cheers
- Thread starter
- #43
OntarioGro17
Well-Known Member
I can attest to the fact that my new lighting is set up for 42"x48" in my 4x4 tent and theres no room to move. I'm gonna move this setup to the 5x5 after this run and move the individual buskets to the 4x4.
Hey scrog I’m interested in your thoughts of the 24SAMS I’m going to be looking at a light upgrade in the near future and an in a 4x4 tent! Going to be fun!
- Thread starter
- #46
Scrogdawg
Well-Known Member
- Thread starter
- #47
Scrogdawg
Well-Known Member
Seems to be a little action in the cloner. Still need 2 more to fill the rdwc. My 24SAMS from Timber have cleared customs, should get them in a couple of days.
Tunkers
Well-Known Member
Seems to be a little action in the cloner. Still need 2 more to fill the rdwc. My 24SAMS from Timber have cleared customs, should get them in a couple of days.
Things tend to happen slower round your parts lol nice to see your shit cloner is doing it's job
Until now I've been using two 400 watt MH/HPS cooltube lights (side by side) to grow with. While I'm waiting for my two Timber 24SAMS to arrive I thought I'd build a grid to test the ppfd of both the MH/HPS and the LED's. My scrog area is 36" x 36" and I'll test at 24", 18" and 12" heights with both lights.
Today, before I removed the MH/HPS lights I tested them with the lights centered over the grid I built. Turns out that at 24" above, these lights running together would be a poor choice all the way around. At 18" above they would be adequate over the center 1 sq/ft. and diminish moving out from there. At 12" above they seem to be good in the 1 sq/ft area, adequate in the 2 sq/ft area and again poor in the 3 sq/ft area. Heres the results I observed.
My Timber lights have shipped and should be at Canadian customs today. Hopefully they'll be delivered next week and I'll test them in the same conditions and report the results again. I'm hoping for big improvements with the Timber lights.
Like i said on other thread, great presentation format...picture, 1000 words.
Starting to gut the tent in preparation for the new lights. I moved one of the 400 watt MH/HPS lights back under the stairs and put the cloner in there with it. Lol, I never thought I'd be growing under there again.
Look closely at the brand name of this cloner, should you ever have the urge to buy yourself one just shoot yourself instead. Its a piece of shit. I'm going to throw away the water pump that came with it and put in an airstone and see if that helps.
Get a rubbermade and work your magic, 10-day clonage...you obviously have the skills.
Attachments
Take a peek, here Timber Grow Lights Powered By Samsung
Ppfd mapping of single and pair of 48sams, in a 4x4. 48sams is a 4 bd fixture, equivalent to scrogdawg’s pair of 24sams, should give you a good comparison to expected presentation of 24sams mapping by the dawg.
With sufficient coverage, mine is extreme coverage, you can’t go wrong with these fixtures. With a little simple diy, you can make your own for about half of timber’s excellent pricing.
These samsung lm301b boards are hands down best you can get , with great efficiency.
Sorry to interrupt your thread SD, just cant say enuff goodness about these lights.
Thanks @OrGro
I’ll be looking into them.
My local hydro shop has some great lighting options to that I may be looking at as its local and I can see them first hand ! My local hydro shop guys are absolutely amazing super knowledgeable have everything I need and will order in something if they don’t!
Happy days !
I’ll be looking into them.
My local hydro shop has some great lighting options to that I may be looking at as its local and I can see them first hand ! My local hydro shop guys are absolutely amazing super knowledgeable have everything I need and will order in something if they don’t!
Happy days !
Yep, nothing better than in-person, and knowlegable locals to discuss with, and keeping the cash in your community.
Cheers!
Rider509
Well-Known Member
Anything good going on in here?
- Thread starter
- #55
Scrogdawg
Well-Known Member
Hahahaha...look whats back.
Tunkers
Well-Known Member
Same OLD shit
OntarioGro17
Well-Known Member
Thought you might of stayed in Hawaii lol.
eldorado303
Well-Known Member
hi scrogdawg. nice looking grow op. very clean and tidy. looking forward to checking out your results.
i also have some seeds from royalqueenseeds. im gonna grow them soon. i have some special queen 1,
special kush 1, shining silver haze, and one extra seed. it will be my first grow
.
i also have some seeds from royalqueenseeds. im gonna grow them soon. i have some special queen 1,
special kush 1, shining silver haze, and one extra seed. it will be my first grow
.- Thread starter
- #59
Scrogdawg
Well-Known Member
My Lights from Timber Grow Lights arrived today. I bought two sets of the 24SAMS lights. Its a total of four Samsung QB288 boards with a total of 1152 diodes at 3000k. Each set (two boards) is powered by a Mean Well 240H-C2100B driver. Each has a dimmable 10% to 100% potentiometer.
The lights are set up and everything is mounted and connected. I've had a chance to play and make note of a few things but I haven't tested ppfd yet, tomorrows job. I'll post those results tomorrow but till then heres a few early observation I've noticed.
- Well packaged for shipping, used a sturdy box and a ton of bubble wrap, packed tightly.
- Quality of materials is excellent, heavy frame and a nice heat sinks with lots of surface area.
- Nice job on all the wiring and assembling, its what I expected from Timber.
- After one hour at full power, the boards were 54 ⁰ C (129 ⁰ F).
- I have 10 inches more head room with these lights, thats big to me.
More tomorrow after I've had a chance to test.
The lights are set up and everything is mounted and connected. I've had a chance to play and make note of a few things but I haven't tested ppfd yet, tomorrows job. I'll post those results tomorrow but till then heres a few early observation I've noticed.
- Well packaged for shipping, used a sturdy box and a ton of bubble wrap, packed tightly.
- Quality of materials is excellent, heavy frame and a nice heat sinks with lots of surface area.
- Nice job on all the wiring and assembling, its what I expected from Timber.
- After one hour at full power, the boards were 54 ⁰ C (129 ⁰ F).
- I have 10 inches more head room with these lights, thats big to me.
More tomorrow after I've had a chance to test.
My Lights from Timber Grow Lights arrived today. I bought two sets of the 24SAMS lights. Its a total of four Samsung QB288 boards with a total of 1152 diodes at 3000k. Each set (two boards) is powered by a Mean Well 240H-C2100B driver. Each has a dimmable 10% to 100% potentiometer.
The lights are set up and everything is mounted and connected. I've had a chance to play and make note of a few things but I haven't tested ppfd yet, tomorrows job. I'll post those results tomorrow but till then heres a few early observation I've noticed.
- Well packaged for shipping, used a sturdy box and a ton of bubble wrap, packed tightly.
- Quality of materials is excellent, heavy frame and a nice heat sinks with lots of surface area.
- Nice job on all the wiring and assembling, its what I expected from Timber.
- After one hour at full power, the boards were 54 ⁰ C (129 ⁰ F).
- I have 10 inches more head room with these lights, thats big to me.
More tomorrow after I've had a chance to test.
Pretty sweet, dawg. Did they blind you?