Peyton & Pals Perpetual Playground

[CronicHempHog]

Does anyone know if I can make e juice for my vaporizer out of weed

yea its usually done with glycerin which if im not mistaken is what ejuice is made from

 

[wildwelshman]

There was a short vid I watched before that one & it said about the monkey test & suffocating them. It seems there was a global conspiracy to make it illegal. Just think how much money the pharmaceutical companies have made & how many lives have been lost in the last 90 years. It's frightening.

i think it started off with the timber trade would lose out on big buck and now the pharmaceutical would lose out on money....like you say its just a big conspiracy for the big company that have all their hands in government...its all a joke as if the legalised it with the taxes it would bring in then we could build and run a new hospital every year...and good morning everyone...

 

[devilish]

Yes. Making e liq from marijuana is achievable. But since the Cannabinoids are not water soluble constant shaking is required. All you need to do is heat up some Propylene Glycol or Vegetable Glycerin to 175 F and add in your flower, leaf or Keaf and heat for 30 minutes at temp. Make sure to stir frequently. I used the dry ice extraction to remove all the trich's and used Keaf in mine so it stayed a nice golden color. Make sure to strain it with the smallest micron hash bag to make sure no solids stay in the liquid. I chose VG as it is slightly sweet and doesn't give the throat hit that the PG does. I then allowed the mix to steep for 30 days. I had to shake vigorously for a min or two before testing. Worked good. Now some e liq flavors contain alcohol but I am against using it. Now if you wanted a stronger liq do your extraction with alcohol first then mix that in small amounts with 70%Pg and 30%VG. PG is better at absorbing Flavorings. Now if you want just the flavor without the high I would recomend an Essential Oil Distiller to extract the oils from the cannabis leaves and then add that oil into a PG/VG mixture. Wish ya the best of luck and it'll take some experimenting to get what you want perfected.

 

[PeytonManning]

Good morning everybody. Getting ready to start another day. Today we'll spray our plant again, mix mykos into our transplant buckets, and try to have a good time doing it

 

[nivek]

cheers peyton,, have a good one, and have fun doing it,, ha,

 

[PeytonManning]

Thanks nivek. I try to have fun with everything I do.

 

[skunnymonster]

I've been having fun in my garden this morning, having a little sing & dance, like you do

 

[PeytonManning]

I'm not used to plants in veg, so it confused me at first when I went a few days without watering them. My last round had to be watered everyday. These seem to be every 2 or 3 days. Gonna see about doing a little lst today, if I get some free time

 

[roughneck 102]

Yes. Making e liq from marijuana is achievable. But since the Cannabinoids are not water soluble constant shaking is required. All you need to do is beat up some Propylene Glycol or Vegetable Glycerin to 175 F and add in your flower, leaf or Keaf and heat for 30 minutes at temp. Make sure to stir frequently. I used the dry ice extraction to remove all the trich's and used Keaf in mine so it stayed a nice golden color. Make sure to strain it with the smallest micron hash bag to make sure no solids stay in the liquid. I chose VG as it is slightly sweet and doesn't give the throat hit that the PG does. I then allowed the mix to steep for 30 days. I had to shake vigorously for a min or two before testing. Worked good. Now some e lie flavors contain alcohol but I am against using it. Now if you wanted a stronger liq do your extraction with alcohol first then mix that in small amounts with 70%Pg and 30%VG. PG is better at absorbing Flavorings. Now if you want just the flavor without the high I would recomend an Essential Oil Distiller to extract the oils from the cannabis leaves and then add that oil into a PG/VG mixture. Wish ya the best of luck and it'll take some experimenting to get what you want perfected.

Thanks man awesome breakdown if I can't make some from those instructions well then I'm just an idiot

 

[devilish]

Thanks man awesome breakdown if I can't make some from those instructions well then I'm just an idiot

No problem man! I used a rice steamer to make mine because it stays at such a constant temp. But a small crock pot would work just as good. When you are shopping around for VG/PG make sure to get USP grade. That is higher than food grade. Makes a huge difference. Check bulkapothacary.com for the VG(Glycerin) and PG as that's where I get mine. All USP grade. I make My own E liq. Not Medical either lol. Also something to take into consideration is the type of e cig you'll be using. Make sure to have a rebuildable coil one. The cannabis will gum up the coils after a while. And the taste will stay around forever if you only have one and use it for e liq and medical lol...went down that road already!

 

[roughneck 102]

No problem man! I used a rice steamer to make mine because it stays at such a constant temp. But a small crock pot would work just as good. When you are shopping around for VG/PG make sure to get USP grade. That is higher than food grade. Makes a huge difference. Check bulkapothacary.com for the VG(Glycerin) and PG as that's where I get mine. All USP grade. I make My own E liq. Not Medical either lol. Also something to take into consideration is the type of e cig you'll be using. Make sure to have a rebuildable coil one. The cannabis will gum up the coils after a while. And the taste will stay around forever if you only have one and use it for e liq and medical lol...went down that road already!

Ok thanks for that or else I woulda made my wife real mad when she went to vape and tasted weed but I'll have to get a rebuildable dripper than cuz right now im using a jellyfish mod box with an Atlantis tank

 

[roughneck 102]

No problem man! I used a rice steamer to make mine because it stays at such a constant temp. But a small crock pot would work just as good. When you are shopping around for VG/PG make sure to get USP grade. That is higher than food grade. Makes a huge difference. Check bulkapothacary.com for the VG(Glycerin) and PG as that's where I get mine. All USP grade. I make My own E liq. Not Medical either lol. Also something to take into consideration is the type of e cig you'll be using. Make sure to have a rebuildable coil one. The cannabis will gum up the coils after a while. And the taste will stay around forever if you only have one and use it for e liq and medical lol...went down that road already!

Ok thanks for that or else I woulda made my wife real mad when she went to vape and tasted weed but I'll have to get a rebuildable dripper than cuz right now im using a jellyfish mod box with an Atlantis tank

 

[roughneck 102]

Y do u top at 5th node and t only one top?

 

[PeytonManning]

In my experience with scrog, you don't want too many main branches. I tried it with 3 and 4 nodes of growth and it gets so bushy. It's all just personal preference.

 

[roughneck 102]

Oh ok definitely don't want that especially without a light to penetrate well...I'll save multiple topping for the outdoor grow

 

[PeytonManning]

That'll be your best bet. When they're big enough, take all those lower nodes for clones. You planning to grow those outdoors? I wish the HGK seeds could be made sooner and ready for outdoor season. But you'll just have to wait and grow them indoors

 

[roughneck 102]

Yeah I bet that hgk would be amazing outdoors...Nah ima grow these indoor might transfer them outside not sure

 

[PeytonManning]

If lights are an issue then you'll wanna try and get at least one outside. All depends on your needs and area I guess. It's gonna be fun doing them outdoor autos

 

[PeytonManning]

Got everything ready for a transplant tomorrow. Now I'll be anxious all night

 

[Kola320]

Sounds like a good productive day you got going on there PM