Fastass419
Well-Known Member
I need to make butter today but dont know how I've never made it before got about a quarter or more for this
PCaddict's 1st Grow Journal
- Thread starter PCaddict
- Start date
But how much didn't you spend (or won't spend) on street weed?I'm at 'bout 14 grand now - figure we're ahead on the deal.
I'm guessing I save around 120 to 140 bucks a day.*
$$$$$
$$$$$*Not that I would smoke like this if I were paying street prices.....
- Thread starter
- #7,003
PCaddict
Member
Maybe we can get @Preston9mm to chime in on how to make a small batch of butter. Do you have an insta pot or crockpot ? I know you can make small batches that way, A 1/4 wont make much butter though so you will have to make a small batch. I make mine in the Magic Butt machine and it has a two cup minimum so I have to use a lot more bud but Preston can tell you how to make small batches , He is a master in making edibles, He has a Great Journal too Here is a link to his journal
P9 Hunts For The Unicorn With Mars SP 250s
Here's the strange top I was talking about earlier... I misspoke though, this is on The White OG (plant#2) :thumb: Looks like a diploid. Polyploid would have at least 3 sided head. Diploids are a dual set of split chromosomes. Think it was @Lancashire farmer who explained that.
www.420magazine.com
Trust me when i say @Fastass419 to get @ilikemsticky butter recipe..i was numb from cookies 3 days in a row
- Thread starter
- #7,005
PCaddict
Member
Dam Chimp what the hell are you smoking ? Your blunts must be as big as a small logI'm guessing I save around 120 to 140 bucks a day.*
$$$$$
*Not that I would smoke like this if I were paying street prices.....
- Thread starter
- #7,006
PCaddict
Member
I forgot about Sticky making edibles tooTrust me when i say @Fastass419 to get @ilikemsticky butter recipe..i was numb from cookies 3 days in a row
Do you want butter, or do you want oil? What are you going to make with it?
The going rate seems to be about 1oz of good bud per 1 cup of butter/oil. If using trim/larf it will take about 3 or 4 times that.
While I'm absolutely no expert on infusions, I have found as an end result that it is better to have stronger oil/butter and use less than it is to try and use more oil/butter.
Here are a couple youtube videos for butter and oil in an instapot.
Shows a way to decarb and then infuse with an instapot. If you don't have an instapot, you can still use the jar, but in a pan of slow boiling water. You can also decarb in the oven if you want. Key on all of this is temperature, and keeping it under 250, preferably 240 or even a little less.
Edibles are kind of a guessing game. You can get in the ballpark, but won't know a super precise number for the actual concentration you end up with. More of an average, and your result may be a hair over or under that.
You can find a decent edible calculator through google, that will get you in the neighborhood. You may need to look up some of the percentages (like the expected thc% of your strain, etc). If it's trim, cut the thc% in half.
The end result is you'll know an average of how much thc should be in your end oil/butter. So if you end up with oil that has 500mg in a 1/4 cup of oil, then make 100 gummies from that, each gummy should be about 5mg each. If you made 50, they would be about 10mg each, or if you made 24 brownies they would be about 20mg, 12 brownies would be about 40mg each. I'm sure you get the idea now.
To plan ahead, know the average strength of your starting product, then how much thc (in mg) you would like to get into the type/amount of carrier (oil or butter, in this example), the average infusion percentages for your chosen extraction method, etc.
Pretty much if you had an oz (~28g) of bud that was about 20% thc, and then infused that into a cup of oil/butter, you should end up with about 5600mg of thc in that 1 cup of oil/butter. So a 1/4 cup would be 1400mg, or 1TBSP would be 350mg. (Again, all averages. May be a hair more or less.)
So if you wanted to make a pan of brownies, you could take a TBSP of oil, and make a pan of brownies. That whole batch now has about 350mg total. Now figure out your dosage, then cut that number of brownies. Want 35mg each? Cut the pan into 10 pieces. A normal dozen would be about 29mg each, etc.
Or if you took a 1/4cup (1400mg total, average) and made 100 gummies from that, you get about 14mg/gummy.
I'm sure you're aware, but you would be surprised how many overlook this, but making the oil will certainly add quite the cannabis aroma to your house. Some people care, some don't. The jar method in the videos above helps, but even then when you open the jar some smell will still escape. Not necessarily a huge deal in a house, but an apartment, townhouse, condo, etc can be an issue if you don't want to advertise.
- Thread starter
- #7,008
PCaddict
Member
Here is a link to Preston's cooking thread. I know there is a recipe for a small batch of butter in there I just cant find it right now
Cooking with The Chronic
- Thread starter
- #7,009
PCaddict
Member
Thanks MV I Love to have informative info on my thread so that is very welcomedDo you want butter, or do you want oil? What are you going to make with it?
The going rate seems to be about 1oz of good bud per 1 cup of butter/oil. If using trim/larf it will take about 3 or 4 times that.
While I'm absolutely no expert on infusions, I have found as an end result that it is better to have stronger oil/butter and use less than it is to try and use more oil/butter.
Here are a couple youtube videos for butter and oil in an instapot.
Shows a way to decarb and then infuse with an instapot. If you don't have an instapot, you can still use the jar, but in a pan of slow boiling water. You can also decarb in the oven if you want. Key on all of this is temperature, and keeping it under 250, preferably 240 or even a little less.
Edibles are kind of a guessing game. You can get in the ballpark, but won't know a super precise number for the actual concentration you end up with. More of an average, and your result may be a hair over or under that.
You can find a decent edible calculator through google, that will get you in the neighborhood. You may need to look up some of the percentages (like the expected thc% of your strain, etc). If it's trim, cut the thc% in half.
The end result is you'll know an average of how much thc should be in your end oil/butter. So if you end up with oil that has 500mg in a 1/4 cup of oil, then make 100 gummies from that, each gummy should be about 5mg each. If you made 50, they would be about 10mg each, or if you made 24 brownies they would be about 20mg, 12 brownies would be about 40mg each. I'm sure you get the idea now.
To plan ahead, know the average strength of your starting product, then how much thc (in mg) you would like to get into the type/amount of carrier (oil or butter, in this example), the average infusion percentages for your chosen extraction method, etc.
Pretty much if you had an oz (~28g) of bud that was about 20% thc, and then infused that into a cup of oil/butter, you should end up with about 5600mg of thc in that 1 cup of oil/butter. So a 1/4 cup would be 1400mg, or 1TBSP would be 350mg. (Again, all averages. May be a hair more or less.)
So if you wanted to make a pan of brownies, you could take a TBSP of oil, and make a pan of brownies. That whole batch now has about 350mg total. Now figure out your dosage, then cut that number of brownies. Want 35mg each? Cut the pan into 10 pieces. A normal dozen would be about 29mg each, etc.
Or if you took a 1/4cup (1400mg total, average) and made 100 gummies from that, you get about 14mg/gummy.
I'm sure you're aware, but you would be surprised how many overlook this, but making the oil will certainly add quite the cannabis aroma to your house. Some people care, some don't. The jar method in the videos above helps, but even then when you open the jar some smell will still escape. Not necessarily a huge deal in a house, but an apartment, townhouse, condo, etc can be an issue if you don't want to advertise.
Now I can go back and find this again. I am thinking about getting an Insta Pot so I can make smaller batches. I Love my Magic butter machine but I have to have 2 ounces on had to make 2 cups of butter or OilFastass419
Well-Known Member
Thanks I do have an instant crockpot so that will be easy I know what I got isn't enough but I will have enough soon and know that's in my library so thanksDo you want butter, or do you want oil? What are you going to make with it?
The going rate seems to be about 1oz of good bud per 1 cup of butter/oil. If using trim/larf it will take about 3 or 4 times that.
While I'm absolutely no expert on infusions, I have found as an end result that it is better to have stronger oil/butter and use less than it is to try and use more oil/butter.
Here are a couple youtube videos for butter and oil in an instapot.
Shows a way to decarb and then infuse with an instapot. If you don't have an instapot, you can still use the jar, but in a pan of slow boiling water. You can also decarb in the oven if you want. Key on all of this is temperature, and keeping it under 250, preferably 240 or even a little less.
Edibles are kind of a guessing game. You can get in the ballpark, but won't know a super precise number for the actual concentration you end up with. More of an average, and your result may be a hair over or under that.
You can find a decent edible calculator through google, that will get you in the neighborhood. You may need to look up some of the percentages (like the expected thc% of your strain, etc). If it's trim, cut the thc% in half.
The end result is you'll know an average of how much thc should be in your end oil/butter. So if you end up with oil that has 500mg in a 1/4 cup of oil, then make 100 gummies from that, each gummy should be about 5mg each. If you made 50, they would be about 10mg each, or if you made 24 brownies they would be about 20mg, 12 brownies would be about 40mg each. I'm sure you get the idea now.
To plan ahead, know the average strength of your starting product, then how much thc (in mg) you would like to get into the type/amount of carrier (oil or butter, in this example), the average infusion percentages for your chosen extraction method, etc.
Pretty much if you had an oz (~28g) of bud that was about 20% thc, and then infused that into a cup of oil/butter, you should end up with about 5600mg of thc in that 1 cup of oil/butter. So a 1/4 cup would be 1400mg, or 1TBSP would be 350mg. (Again, all averages. May be a hair more or less.)
So if you wanted to make a pan of brownies, you could take a TBSP of oil, and make a pan of brownies. That whole batch now has about 350mg total. Now figure out your dosage, then cut that number of brownies. Want 35mg each? Cut the pan into 10 pieces. A normal dozen would be about 29mg each, etc.
Or if you took a 1/4cup (1400mg total, average) and made 100 gummies from that, you get about 14mg/gummy.
I'm sure you're aware, but you would be surprised how many overlook this, but making the oil will certainly add quite the cannabis aroma to your house. Some people care, some don't. The jar method in the videos above helps, but even then when you open the jar some smell will still escape. Not necessarily a huge deal in a house, but an apartment, townhouse, condo, etc can be an issue if you don't want to advertise.
Fastass419
Well-Known Member
Hey pcaddict the instant crockpot is nice I use it alot I cook alot of 1 pot meals in there and clean up is easy since my wife works late and I get out as early as I want which she hates but I make most of the meals but that and the air fryer is nice I got mine when they first came out so they came togetherThanks MV I Love to have informative info on my thread so that is very welcomed
- Thread starter
- #7,012
PCaddict
Member
Man you are going to have a tone of bud as soon as you harvest and dry. If I could make it to @Derbybud house and use his Vacuum sealer. I would send you out a little care package, With this virus thing its not a good ide to go visiting folks so it may be after all this settles down before I can make it over to his place and seal some of my bud up but as soon as I can I will send some out
Fastass419
Well-Known Member
No with the problems you just went thro you stay home and stay safe that's way more important
Fastass419
Well-Known Member
Dont get me wrong I would love to try your smoke it looked great I just do want you to risk anything
You're welcome.
What you have is actually enough, depending on what you'd like to do with it of course. 1/4C of oil isn't a ton, but it's at least a batch of something.
- Thread starter
- #7,016
PCaddict
Member
I would like to start another journal but I don't remember how to do it. Could someone walk me through the process I would very much appreciate it. I am also on a computer. I hate using my phone and I only use it to post pictures
Derbybud
Well-Known Member
Just come over and pick up what you need. I have damn near everything and stuff I'll never use. Please use this stuff as it sits 98% of the time.
- Thread starter
- #7,018
PCaddict
Member
Would it be possible to swing by some time this week and what time works best for you guys. I also need to bring some supplies, What size and where do you get the plastic film ? I seen some somewhere in a store I think it was Kroger, I didn't know what size vacuum seal plastic to get ? they had different sizes and I need to drop off those seeds for you and Penny
Derbybud
Well-Known Member
PM me tonight so I can see what we have and what you might need
ilikemsticky
Well-Known Member
that's why I did the perpetual thing no need to start a new one I forget how to do that stuff to.
Similar threads
