iampalmetto
New Member
Whatup yalls,
Last week, I posted a journal entry on my very first grow (outdoor), and I mentioned the ton of seeds I was able to obtain from my last batch of bud. Since then, I've germinated two more and decided to build my own DIY Cardboard Grow Box for my first indoor CFL grow.
Here's what I'm working with:
Setup - DIY Cardboard Grow Box
Light - 4 23w CFLs [5000k]
Ventilation - 4" Mini-Fan for Intake + Foxconn PC Fan for Exhaust
Bucket - 1/2 Gallon... I think.
Soil - "Just Natural" Organic Soil
Strain - Unknown [2 BagSeeds]
Room Temp - 75°
Box Temp - 82°
Humidity - 35-45%
Now let me show you my setup.
It took me two days to finish. I started with the lid, and as you can see I taped a power strip to the center, inside. Cut two holes for the CFLs to hang, and lined the walls with aluminum foil.
Next, I laid out mylar around the main box and cut a hole in the bottom portion for the intake. .
Got a little creative and added a window to see what's going on in there.
Finally, cut a hole in top-left corner of box for exhaust. Removed the Fan from my PC. Stripped the wire from an AC Adapter and twisted around PC Fan wires for power. .
Take a peek inside! Look at that little sprout, hopefully it's a female. .
Gonna stick with 24/0 for now... Might switch to 18/6 in a few weeks though. I'm excited to see what my grow box is capable of! What do you guys think?
All your help and support is greatly appreciated.
Thanks,
@iampalmetto
Last week, I posted a journal entry on my very first grow (outdoor), and I mentioned the ton of seeds I was able to obtain from my last batch of bud. Since then, I've germinated two more and decided to build my own DIY Cardboard Grow Box for my first indoor CFL grow.
Here's what I'm working with:
Setup - DIY Cardboard Grow Box
Light - 4 23w CFLs [5000k]
Ventilation - 4" Mini-Fan for Intake + Foxconn PC Fan for Exhaust
Bucket - 1/2 Gallon... I think.
Soil - "Just Natural" Organic Soil
Strain - Unknown [2 BagSeeds]
Room Temp - 75°
Box Temp - 82°
Humidity - 35-45%
Now let me show you my setup.
It took me two days to finish. I started with the lid, and as you can see I taped a power strip to the center, inside. Cut two holes for the CFLs to hang, and lined the walls with aluminum foil.
Next, I laid out mylar around the main box and cut a hole in the bottom portion for the intake. .
Got a little creative and added a window to see what's going on in there.
Finally, cut a hole in top-left corner of box for exhaust. Removed the Fan from my PC. Stripped the wire from an AC Adapter and twisted around PC Fan wires for power. .
Take a peek inside! Look at that little sprout, hopefully it's a female. .
Gonna stick with 24/0 for now... Might switch to 18/6 in a few weeks though. I'm excited to see what my grow box is capable of! What do you guys think?
All your help and support is greatly appreciated.
Thanks,
@iampalmetto