Noob’s First One: 2x2, 125W QB, Coco

Midnight temperature test with fan inside and exhaust at full speed is about 28°C but only about 5°C above my room temperature so +5°C in the tent which is a very small 2x2 is logical ?
Here the test light on around 11.30pm maybe ;)

E1BC95F7-AB1C-4D26-BE7D-360CF4AB7DED.jpeg
 
Yoo broos
Any advice if its possible to spilt my 3 sprouted seeds from the same pot into 3 pots ???
Ill then transplant in around a week or two max i guess !

4528C096-DBAE-4DB4-A029-527F87A5EC47.jpeg
7C061F14-14DE-4BEC-8A64-8DBE1272D9C3.jpeg
 

Attachments

  • 04AB8F22-7872-4CE3-AA37-6285EEB50B17.jpeg
    04AB8F22-7872-4CE3-AA37-6285EEB50B17.jpeg
    778.2 KB · Views: 258
Yes. You will want to do it very carefully, and ASAP. The sooner the better, before those riots really start taking off.. best to avoid those by planting one seed per pot lol :thumb:

take a spoon or something to take a scoop out. Hopfully the roots haven’t gone too far down. It’s going to be messy, and you may lose a plant, but it’s 100% do able!
 
Thanks for the help bro :) i was wondering how to take them out !

And indeed one/pot haha i did that because these ones are from weeds I’ve smoked (so may turn herma but np until this may not go until flowering sadly ...) and in one pot where 2 or 3 seeds were putted, nothing went out, so from my maybe 9 seeds of begin only 4 have sprouted (and 3/3 in the same pot so the lucky pot !) so im gonna transplant each one in a single 0,5L asap !!

Then ill feed with about 1ML COCO A + B / 2ML RHIZO, im still looking for best way to mix those with my water round 0,5 EC and 7,66 PH, nobody told me about the Cal-Mag adding, looks like its not used at all where I live ... hmmm ... any advice on that please ? Knowing that i also have some distilled water so maybe better at least for seedlings ?

Ps : i havent any ph - or +, i was about to put some vinegar to make a ph- may i do that ?

Thanksssss

:snowboating:

Down the girls, i will keep the 4 already there, the last one is too slow going !
A898425C-6144-4D1F-B7E9-CF548A754979.jpeg
 
Ok brooooos now we talk about transfer 2 of the 3 girls of the same pot into 2 others so each one has her ! Lets begin the operation ...

B1B3674F-AD42-4245-A2C7-E1FB07B080F1.jpeg



Because my tap water hasn’t been pulled in more than 24h i wont feed BUT will recycle the old pots coco so at the end ill arrive at pots still wet at +50% mini and +80% max, may i foliar too after this though transplant ?

Now thanks to @Backlipslide i take my spoon weapon and lets do this, here you see the last seed that has sprouted and who will be thrown ... sorry ...

501F77D2-8BC6-41E1-808F-16C941B0BB6F.jpeg


Sadly they all came like that, so i went very fast with the ones i wanted to keep to avoid light humidity etc, made a hole, suspended it and had the coco little by little !

BEF7A3FF-A619-4E69-AC75-C917D296B408.jpeg


Final result and go to tent

2FF18889-37C2-4ED6-A511-6760309957C6.jpeg
BD2245D2-1A65-4BA2-95E8-01BAEC04C8FF.jpeg


:ganjamon:
 
Upp :snowboating:

Marsella said:
Then ill feed with about 1ML COCO A + B / 2ML RHIZO, im still looking for best way to mix those with my water round 0,5 EC and 7,66 PH, nobody told me about the Cal-Mag adding, looks like its not used at all where I live ... hmmm ... any advice on that please ? Knowing that i also have some distilled water so maybe better at least for seedlings ?

Ps : i havent any ph - or +, i was about to put some vinegar to make a ph- may i do that ?
Click to expand...
 
I’m using Megacrop so I don’t add Calmag. They may need a boost in flower but that remains to be seen. If your using coco you want to be between 5.8 and 6.2 ph.
 
Ok thanks again then I’ll go for alg a mic by biobizz if nobody says the opposite :) and with coco looks like most use calmag all run long but their « official schedule » says start algamic on weeek 3 ? Which should be about a week after my first transplant into the 3,5L pots ? Or should I begin asap with idk 1/4 dose ? :lot-o-toke:
 
Hey @Marsella!
Mind if I join along? :popcorn:I haven't done a coco grow, I'm in my 1st grow and doing an ebb and flow. But would love to tag along to learn.
 
Yo @Rexer, welcome for sure only if you share your popcorns ! I really have to take time and go threw all your growing journal bros, ive juts checked your Rexer and im already in love with your full hd grow hahaha
Back to mine, i had to take off the big led during night because it was first time and i was too stone to check all night long the temperature, so the girls have finished their night under the shitty led, today i stop light in around 30 minutes, and tonight the girls will have some feeding with maybe PH 6,2 or 6,4 because i dont have any cal mag so maybe better this way and with 400ppm ?

Im a little bit scared about my first nutrient mix ppm ph ec but no problem lets see if i can do that without any knowledge because i KEEP IT SIMPLE hahaha

Peace bros and thx for following :snowboating:
 
I’m glad the transplanting went well, they all look pretty happy after it all!! :thumb:

yes vinegar can be used as a ph down.:thumb:
 
Here's my 2x2 I got going I have x2 qb132 60w ea so same power but spread out into 2 boards...I'm a big fan of efficiency so I'm all about USB powered oscillating fans that does under 5w and oscillation is huge too I believe...
In the process of rebuilding my setup should have all the parts in the next few days to finish it up and get the clones in their new home until I get my veg tent done
IMG_20200603_210413.jpg
 
Indiva710 said:
Here's my 2x2 I got going I have x2 qb132 60w ea so same power but spread out into 2 boards...I'm a big fan of efficiency so I'm all about USB powered oscillating fans that does under 5w and oscillation is huge too I believe...
In the process of rebuilding my setup should have all the parts in the next few days to finish it up and get the clones in their new home until I get my veg tent done
IMG_20200603_210413.jpg
Click to expand...
Damn that is a nice usage of space!
Awesome build!


Thanks @Marsella
 
@Indiva710 WWOOOOW i love your setup bro im so jealous !!!
To be honest i made some fcking 3D plan etc and finally i thought that for my first .... KEEP IT FCKING SIMPLE, my favorite quote : if you never do anything, you will never make mistakes hahah
But yeah im gonna have a look because i thought about those fans on amazon there were a x5 pack full usb and i bought a usb power strip so very interesting about feedback :) im gonna check your journal later already love it :ganjamon:
And yeah i would have love to be able to split my led panel like you but not handyman so i bought it like that ;) you should rename EfficiencIndiva bro !!!
 
Back
Top Bottom