Moonshine First Grow - Crop King Autos Early Miss & NYC Diesel

Rate this thread

  • Total voters
    7
Ode to the night owls; who's feeding frenzy falls fodder under the pale moon light...........Nightcap was gooood!

Sent from my SM-N920V using 420 Magazine Mobile App
 
tricam said:
Congratulations on the pistols. Now the FUN begins. Ok bugs on your plants? look for webs first (no webs, no s-mites). Holes concentrated in one area, culprit not in sight (not a caterpillar). Probably a fly by muncher, moth?
Triple strength NEAM (12 drops per pint. max). IF NEEDED, you can use broad spectrum or drench. Hang a couple of sticky paper (Bright color) in the area.
Your plants look healthy, root zone temperature could have caused the lower leaves to die quicker than norm. pH fluctuation and age of the older lower leaves will show forms of maladies that is normal. As long as new growth is healthy and plants overall health is vibrant, I look at them, and when I think that those dying leaves at the bottom of my plant have done its part in the development of the total system "I CUT THEM OFF".
I see you have a moisture / temp doohickey stuck in a pot. Do you have a pH / TDS(ppm) tester for liquids going in, coming out, and sitting in-between?
This comes from my library of borrowed good information, might help.
"Keeping soil balanced with the proper level of pH and nutrients will help ensure that you are growing healthy plants.
soil acts as a buffering system for the water and nutrients your plants have access to. Any mistakes in your TDS or pH levels won’t have any immediate negative effects.
One of the downfalls is that it’s easier for nutrients to build up in the soil, which can cause high TDS levels and lower your pH. The TDS and pH at the root level could differ drastically from whatever values you have in the fertilizer solution you are feeding your plants. Obviously, this can cause trouble.
Additionally, there are other factors which can determine how the nutrients are being taken in by a growing plant. If it’s chilly in your grow room, the leaves of your plant won’t properly evaporate moisture because of the low temperature.
This evaporation is a key part of the vacuum cycle that draws nutrients up through the roots, and without it, your plant won’t pull in all the nutrients available in the soil. This means that the nutrients will start to accumulate in the soil, lowering the pH around the root system.
High acidity in the roots limits the intake functions of the root hairs, which further exacerbates the difficulty your plant will have absorbing nutrients.
This is an excellent example of how your plant’s environment can become unbalanced, even if the pH and TDS levels in your nutrient solution are perfect. It’s very important to measure pH and TDS of your soil regularly— every two weeks works well. Don’t forget!
Measuring soil levels is very easy so let’s start with the basics. You’ll be mixing a 1:1 ratio of your soil from around the roots and demineralized water (water with TDS 0 and pH 7). Then you’ll let this mixture sit for 24 hours, occasionally stirring. Then, simply filter it and measure the TDS and pH. Voila— the values of your mixture are the values of your soil!
The devil’s in the details, so let’s go deeper with the step-by-step process you can use to measure the acidity and total dissolved solids of your soils. First, you are going to want to gather together everything you need:
-TDS and pH meter
-Demineralized water (water with TDS 0 and pH 7- you can get this at gas stations or drug stores)
-2 measuring containers (capable of containing at least 6 ounces!)
-4 cloth or coffee filters
To start your test, remove 3 fluid ounces of soil from around the roots and mix it with 3 fluid ounces of demineralized water in one of your measuring containers. Let this mixture stand for 24 hours, but continue to stir it occasionally. This way you will make sure all the nutrients dissolve completely.
After everything in your solution has dissolved completely, pour it through a filter into the other measuring cup. Continue to repeat this process until you have a totally clear liquid. Now use your meter to determine the TDS and pH values of the soil your marijuana is growing in.
The best TDS values fall between 750 ppm and 1500 ppm, depending on the maturation of your plant and the amount of nutrients it can absorb. The pH should be around 6.
What to do if you don’t have the right levels? Maybe your pH is too low. If it is 5.5, for example, you’ll want to raise the level up closer to 6. The next time you give your plant water, use water with a pH value of 6.5. The same method works for TDS levels."
Maybe one day I will be able to come out of the closet and grow freely on my patio, or set up a growops like ohioboy has going on.

UNTILL THEN

I WILL CONTEND WITH MY 20"x14" and 30"x24" cubbyholes. :high-five:

small_space.jpg



And the walk along my backyard with my companions. :thumb:

companions.jpg


Have a wonderful day :bravo:
Click to expand...


Thanks again for all this valuable info, & for taking the time out to respond. I really appreciate everyone's responses. It's beautiful morning here in the river city!! Can't wait to check on my lil ones. Hoping I don't find evidence of more bugs on me plants. Might order some ladybugs, as the boss loves em! BONUS points. Nice looking dogs cam!!

Enjoy your day!!

Oh, is this meter what you were talking about? Thanks. HM TDS EZ Water Quality Tester
 
Kingjoe83 said:
Me love cookies. .. cookie cookie cookie.

Me special going to love me some white cookies.. I cam smell them delicious baked goods from.here dang! !

How to grow in Coco - Feed schedule
Click to expand...

Lol king. when ever I go out & turn on the lights & zip up the tent, it reminds me I've turning on an oven for some reason.
 
Kingjoe83 said:
Haha no we don't want to roast them moon, lol I know they smell delicious like a home made bread. Lol just playing. Your plants play today?

How to grow in Coco - Feed schedule
Click to expand...
Bout to go check on them for those bugs & pistils. It's nice only having 4 plants in tent. I may put two more outside if others are doing ok for a week or so. My two 300w galaxy hydro leds, 1 45w cfl, 1 45w led is prolly not enough for 4 plants right?

Although they do get natural sun throughout the day unless it's raining. Peace out buddy.
 
Moonshine17 said:
Bout to go check on them for those bugs & pistils. It's nice only having 4 plants in tent. I may put two more outside if others are doing ok for a week or so. My two 300w galaxy hydro leds, 1 45w cfl, 1 45w led is prolly not enough for 4 plants right?

Although they do get natural sun throughout the day unless it's raining. Peace out buddy.
Click to expand...
I heard two 300's alone should be good for 4 plants anyways not sure about other light sources as only have expierence in hps and Led so far.

How to grow in Coco - Feed schedule
 
Moonshine17 said:
IMG_51997.JPG


Should I cut off these two bigger fan leaves to get more light to the shoots? Thanks!
Click to expand...

Good morning, don't cut them off yet. If the leaf is blocking a bud site you can trim part of it for more light penetration.
Looking Good!
 
tricam said:
Good morning, don't cut them off yet. If the leaf is blocking a bud site you can trim part of it for more light penetration.
Looking Good!
Click to expand...


Thanks. CAm. Hey my friend. I just finished my attempt at lst. Im about to post several pics if u don't mind critiquing and giving advice. Thanks bud. :thumb:
 
Back
Top Bottom