Mars-Hydro LED Grow Light Discussion

Yup hope you did as well @Mars Hydro here a bit of a leak on what’s coming new gals are up


Fc6500 rocking so far


 
Yup hope you did as well @Mars Hydro here a bit of a leak on what’s coming new gals are up


Fc6500 rocking so far


Ooh! You’re braving soil on the new run??? Sweet! @Krissi1982 is gonna hand-hold me for my next run which will also be soil :)
 
Ooh! You’re braving soil on the new run??? Sweet! @Krissi1982 is gonna hand-hold me for my next run which will also be soil :)
YOU HAVE MAIL

Screenshot_20220105-074523_Gmail.jpg
 
YOU HAVE MAIL

Screenshot_20220105-074523_Gmail.jpg
Got it! :). I so have some questions, so I’ll do a mark-up and reply later today (feeling super lazy/tired this AM). Thank you lady!
 
Got it! :). I so have some questions, so I’ll do a mark-up and reply later today (feeling super lazy/tired this AM). Thank you lady!
No problem, knew you would. Figured it was easier to send some stuff over and have you start looking at it and see what else you need or want to know more in detail
 

Installation And Tutorial Of Inline Duct Fan Kit​

3a1825c794964cb5b5ef4645416f5853.jpg

Air circulation is important for indoor growing. Indoor cannabis plants are usually grown in a relatively sealed environment, such as a closet, tent or room dedicated to growing. A fresh air supply helps cannabis grow quickly and protects the plants from certain pests and molds.

Mars Hydro Inline Duct Fan can provide fresh air to your sealed growing environment. They offer four and six inch fans with different controllers. You can choose the right fan according to your growing area and needs. This article serves as a tutorial to demonstrate how to install and use Mars Hydro inline duct fan kit inside a tent.

All items in the kit​

Clamps, Screws, Belts, Probe Sensor, Thermostat Controller, Carbon Filter, Fan, Duct

All_items.png

Installation Procedures​

Step 1: Hang the fan and filter​

Hanging the filter and fan to the same height, then connect them. When connecting you can also cut down part of the duct to connect the filter and the fan, which will be more sturdy.

Step_1.png

If you do not know how to tie the belts, please refer to the tutorial below. This method of tying the belts makes it easy for you to adjust the height.

tie_belt.png

Step 2: Connecting the fan to the duct​

Connect the fan to the duct and secure them with the climp. Be careful when using the climp, it is sharp.

Step_2.png

Step 3: Connects the fan to the controller​

Connect the sensor and fan to the controller, remove the cap before you use the probe. Then power on and you can use it.

Step_3.png

The fan and carbon filter can be moved into position to suit your needs. For example, On the inside, top or side of the tent.

air_circulation_position.png

Thermostat Controller Tutorial​

Button diagram:

CONTROLLER.png

The controller has four modes, The following steps teach you how to operate the controller.

ON MODE:​

Fan keeps working at set speed
Fan speed can be adjusted from 1 to 10

OFF MODE:​

Fan won't work
Press UP/DOWN buttons to adjust display brightness
Press UP/DOWN buttons at the same time for 3s to convert Fahrenheit to Celsius
Press the MODE button and LEAF button to rectify the probe temperature and humidity

TIMER MODE:​

Set the fan's working time, with a countdown
Fan works at the speed you set in ON MODE

AUTO MODE:​

4 Triggers can be set: High/Low Temperature, High/Low Humidity
When the probe temp/humidity exceeds the set ones, the fan will automatically work till the probe temp/humity is the same with set ones.
Above is the full tutorial of the fan set. Meanwhile, we have created an installation video. Through the video you can be more clear about the installation and use of the inline duct fan set.


If you have questions, leave your comments and we will answer them for you.
 
I am allowed to give away my prize guys.
Its of no use to me i cant spend it on my countries web site.
So if your in the USA and need a discount drop me a message.
Mental note if your from europe dont enter the discount code prize draws.
No point it will all go on delivery charges on the .com USA site
;)
$50 of a $200 product/check out basket.
 
Hey @mars when are the controller will be back in stock Ben waiting patiently to get one hope they be in stock soon cheers !!!!
Are they anygood had two in my basket.
But thinking of going another route now?
The fans Vs the well know model?
Cant really find any solid user reviews. ;)
 
I’m sure there fans do killer just like there lights if I was you I’ll pull the trigger I wished I got one wen i purchased mine but they didn’t sell them yet but wen mine gives out I’m definitely goin with Mars !!!!
 
I’m sure there fans do killer just like there lights if I was you I’ll pull the trigger I wished I got one wen i purchased mine but they didn’t sell them yet but wen mine gives out I’m definitely goin with Mars !!!!
Sy thought you had one.
I own the other brand and know its a solid unit.
Just trying to save a few £$ on the mars units.
But i think i will just go with what i know works for me.
Come end of the month thanks friend. ;)
 
Nicee brother I will be getting one I’m almost running all Mars gear from tents to lights alll I’m missing is fans an there new crontrol unit witch looks really good for the price
 
Ye they look nice.
Hope you grab one in the end.
But as said im going a different route i think.
Wont say there name out of respect.
Nothing but good things to say about the lights.
So the fans should be just as good like you said.
:thumb:
Nicee brother I will be getting one I’m almost running all Mars gear from tents to lights alll I’m missing is fans an there new crontrol unit witch looks really good for the price
 
Back
Top Bottom