- Thread starter
- #41,241
Mars-Hydro LED Grow Light Discussion
- Thread starter Mars Hydro
- Start date
- Thread starter
- #41,243
Mars Hydro
420 Sponsor
Haha, I understand what you mean, the data shows enough to hang it around 18''. But from the feedbacks of other growers from other platforms, they all tell us the light is too strong for early stage. They want to use CFL to do the early stage and then change to this light, thus I mentioned to hang them higher; This is the meaning of the tester programme;Well...
No.
BTW, we will see how the lights will work out from your side, please keep us posted! 
Will do!
Seeds will be soaked for germination Tuesday evening.
Seeds will be soaked for germination Tuesday evening.
- Thread starter
- #41,245
Mars Hydro
420 Sponsor
- Thread starter
- #41,246
Mars Hydro
420 Sponsor
Evening everyone, so I am here to get you some update picture, and have fun!
Well the new sp150s bring double headed colas just like the old 1200 did check em out
Well the new sp150s bring double headed colas just like the old 1200 did check em out
- Thread starter
- #41,247
Mars Hydro
420 Sponsor
Grow of Mars Family!
- Thread starter
- #41,248
Mars Hydro
420 Sponsor
10 REASONS WHY CHOOSE MARS HYDRO GROW TENTS
By Tina Chou Yesterday
Last time, we have introduced that we have upgraded our grow tents cloth material into diamond pattern.
Most of other suppliers still use the lichee pattern. This time, we will tell you guys some other advantages of our grow tent.
The grow tents in market almost have the same construction and components. But the materials each company use is a little different. These materials would be used for making a grow tent.
Heavy duty 210D, 600D or 1680D oxford cloth, adaptor corners, poles and zippers, etc.
Here are some other differences between ours and others.
1: Adaptor corner: We use metal adaptor corner but some of suppliers still use plastic corners. Metal corner is more solid and connect the poles better. Plastic corners would break easily and cannot connect parts well.
2: Lighting moving hangers. Other suppliers only have two hangers. We have four move hangers.
3: snap button. We have sticker that can connect the poles with corners strongly. While the poles can drop out from plastic corners easily.
4:we use double stitching, which can connect the cloth with cover well. So there will be no light leak and the tent will be more solid. While others use single stitching. This kind of tent wold break easily when you set up.
5:Vent. We use double oxford clothes and contraction buckles. Others use simple fabric and there is no contraction buckles. That would cause light leak.
6: Easy-View window. Others only use velcro and don’t hem the window well. It will break easily when you put the window up and down. We hem the window twice and it could extend the lifespan.
7:Zipper. Others’ zipper cannot be protected well. it might stuck or be damaged when you pull it hard. We use better quality zipper and it is protected very well. It is a bad experience when you use the tent for a few weeks but the zipper break easily.
8: Reinforced corner. It can strengthen the cloth corner and avoid the easy damage.
9: Removable floor tray:
10: Totally no light leak.
So these are the advantages of our grow tents. If you have checked this information, why you still want to buy another tent? The most important thing is that we have declined the price a lot. So you can get the most cost-effective grow tent there.
By Tina Chou Yesterday
Last time, we have introduced that we have upgraded our grow tents cloth material into diamond pattern.
Most of other suppliers still use the lichee pattern. This time, we will tell you guys some other advantages of our grow tent.
The grow tents in market almost have the same construction and components. But the materials each company use is a little different. These materials would be used for making a grow tent.
Heavy duty 210D, 600D or 1680D oxford cloth, adaptor corners, poles and zippers, etc.
Here are some other differences between ours and others.
1: Adaptor corner: We use metal adaptor corner but some of suppliers still use plastic corners. Metal corner is more solid and connect the poles better. Plastic corners would break easily and cannot connect parts well.
2: Lighting moving hangers. Other suppliers only have two hangers. We have four move hangers.
3: snap button. We have sticker that can connect the poles with corners strongly. While the poles can drop out from plastic corners easily.
4:we use double stitching, which can connect the cloth with cover well. So there will be no light leak and the tent will be more solid. While others use single stitching. This kind of tent wold break easily when you set up.
5:Vent. We use double oxford clothes and contraction buckles. Others use simple fabric and there is no contraction buckles. That would cause light leak.
6: Easy-View window. Others only use velcro and don’t hem the window well. It will break easily when you put the window up and down. We hem the window twice and it could extend the lifespan.
7:Zipper. Others’ zipper cannot be protected well. it might stuck or be damaged when you pull it hard. We use better quality zipper and it is protected very well. It is a bad experience when you use the tent for a few weeks but the zipper break easily.
8: Reinforced corner. It can strengthen the cloth corner and avoid the easy damage.
9: Removable floor tray:
10: Totally no light leak.
So these are the advantages of our grow tents. If you have checked this information, why you still want to buy another tent? The most important thing is that we have declined the price a lot. So you can get the most cost-effective grow tent there.
- Thread starter
- #41,249
Mars Hydro
420 Sponsor
We will attend the Spannabis During March 15~17th, 2019; Anyone will go there? We have 10 ticket can share.
Awesome tent @SmokeSara !
I will have it in mind sounds really well constructed.
Well I wouldn't mind testing it too
It is sweet of you to hand out tickets to Spannanis, there are a few members here from Spain.. Let me see if I can locate them.
I will have it in mind sounds really well constructed.
Well I wouldn't mind testing it too
It is sweet of you to hand out tickets to Spannanis, there are a few members here from Spain.. Let me see if I can locate them.
- Thread starter
- #41,251
Mars Hydro
420 Sponsor
Thank you AB, the tent advantages is always there, it is our fault not making it out so everyone can see it. haha! And thank you for the help on sharing the Spanabis tickets.Awesome tent @SmokeSara !
I will have it in mind sounds really well constructed.
Well I wouldn't mind testing it too
It is sweet of you to hand out tickets to Spannanis, there are a few members here from Spain.. Let me see if I can leave them cate them.
Sent them a PM.
No worries, if I can help, just shout out
No worries, if I can help, just shout out - Thread starter
- #41,253
Mars Hydro
420 Sponsor
Hello everyone, for our SP-200, the first shipment, we make the light 250w, higher par output, higher wattage, but a little lower efficiency than 200w; So for future SP-200, which one do you prefer? The 200w, highest efficiency or 250w, higher par output, but a little lower light efficiency?
If you choose 200W, type 1; 250w, type 2; Thanks!
If you choose 200W, type 1; 250w, type 2; Thanks!
- Thread starter
- #41,254
Mars Hydro
420 Sponsor
Your the best!Sent them a PM.
Hm, I dont know why I am not getting alerts for this thread! So much reading!!
Cant wait for the plants to finish.... @SmokeSara your 144s are doing great!
This is only one top of aprox 30 on this plant.... (I will count them later today, excluding the little tops and focusing on the primary's) The buds are just bearly forming now... another 6 weeks until cutting. Then a month for the cure! Then the final weigh in!
Cant wait for the plants to finish.... @SmokeSara your 144s are doing great!
This is only one top of aprox 30 on this plant.... (I will count them later today, excluding the little tops and focusing on the primary's) The buds are just bearly forming now... another 6 weeks until cutting. Then a month for the cure! Then the final weigh in!
Attachments
Teddy Edwards
Well-Known Member
Have you checked your Preferences? Click on your username (top black menu bar) and make sure that "receive email notifications" is ticked.
Have you checked your Preferences? Click on your username (top black menu bar) and make sure that "receive email notifications" is ticked.
Teddy, thanks for the response!
I will have a look, I usually get updates... and I havnt changed anything! (I had ment the bell icon!)
Top of thread, press watch.Teddy, thanks for the response!
I will have a look, I usually get updates... and I havnt changed anything! (I had ment the bell icon!)
Could be a glitch somewhere if it is on.
(Edited)<WHOOPS!>
Big Sparks
Well-Known Member
New plants...under an oldie...but goodie!
Had this 96×5watt Reflector series for at least a few years now and still a pretty darn good all around light. And the newer technology just keeps getting better. Just thought id throw this out there.
Sparks.
Had this 96×5watt Reflector series for at least a few years now and still a pretty darn good all around light. And the newer technology just keeps getting better. Just thought id throw this out there.
Sparks.
Similar threads
