LED Scrog Hydro: Bruce Banner, Sour Diesel Amherst Diesel

Status
Not open for further replies.
Only grow room i have seen with wall to wall carpet. Cute cat :thumb: too.
Not entirely. I soaked the carpet under the res and instead of letting it dry I just cut it out, so the res is actually a couple inches below the pots sitting on concrete.

This project was an enormous amount of work. I started cutting corners. There's supposed to be a window mounted ac, co2 and white plastic on the walls but whatever.

I've spent over $30,000 on medical cannabis in the last 5 years plus $5,000 building this system, and I'll make it back in savings in the first two grows.

I plan on cloning a bruce banner mother and making the second grow 5 clones from it.

I have big plans hopefully I don't f it up.
 
PXL_20210220_023944692.jpg

Spreading out nicely. Sour Diesel may reach the screen after all...
 
PXL_20210220_023944692.jpg

Spreading out nicely. Sour Diesel may reach the screen after all...
Hopefully you get a great pull on your grow. Those are some heartbreaking numbers.$$$$$$ crazy my friend wow.
 
PXL_20210222_050938520.jpg

Half assed hung white plastic and continued canopy maintenance. Had to tie down many BB branches to turn them horizontal. No broken branches.

I dunno if that plastic on the containers matters but it seems to increase the light around the plants.

PXL_20210222_051609018.jpg

This feeds clean cool air low.

PXL_20210222_051557533.jpg

This pulls the hot smelly air out.

I guess I didn't f it up yet :)
 
PXL_20210223_031715842.jpg


PXL_20210111_175736834.jpg

January 4th to February 22 - week 7 of veg, screen is 50% filled. Flowering starts at week 8.

My cat prefers Sour Diesel but she'll eat whatever she can reach :)

Speaking of Sour Diesel - this plant is seven weeks old and is barely a foot tall - yet it has the same number of nodes as the other plants. I topped it twice.

SD
PXL_20210223_034320351.jpg

PXL_20210223_053431189.jpg


BB
PXL_20210223_053238429.jpg
PXL_20210223_053357492.jpg



AD
PXL_20210223_053323372.jpg
 
PXL_20210227_203649239.jpg
PXL_20210227_203816430.jpg


I'm running with extremely low humidity and extremely high air flow. The plants are going through 3-5 gallons of water every couple days. Ec is low 635, ph between 5.7 and 6.2, Disolved Oxygen 11-14ppm, res temp 65f. Room temp is 70-75f.

The Sour Diesel in the middle is doing great. Looking forward to its stretch.
PXL_20210227_204431546.jpg
 
PXL_20210227_203649239.jpg
PXL_20210227_203816430.jpg


I'm running with extremely low humidity and extremely high air flow. The plants are going through 3-5 gallons of water every couple days. Ec is low 635, ph between 5.7 and 6.2, Disolved Oxygen 11-14ppm, res temp 65f. Room temp is 70-75f.

The Sour Diesel in the middle is doing great. Looking forward to its stretch.
This picture shows the main stems (7) that are essentially growing right next to each other. There's at least 7 new branches forming on those existing branches so I sure hope this thing stretches.
 
PXL_20210228_081926806.jpg
PXL_20210228_082042731.jpg


Yes. Hack. But I got negative pressure with carbon filters on each end. Temperature, humidity, odor and cat problems solved in under 30 minutes with 0 permanent alterations to my house. I'll take the hack.
 
Way to innovate Biden!
PXL_20210228_224410951.jpg
PXL_20210228_224314736.jpg


Naw I hacked it. It had problems but this one seems to be better. This setup doesn't change the smell of my grow room - it just prevents that smell from leaving.

5 minutes in here my clothes smell like diesel fuel. I can't go out unless I change them.

I built a wooden frame that fits over the door frame then cut undersized holes in the plastic for intake and exhaust and added a zipper for entry.

It works better and looks better.
 
Way to innovate Biden!
PXL_20210228_224410951.jpg
PXL_20210228_224314736.jpg


Naw I hacked it. Here's version 2.

This setup doesn't change the smell of my grow room - it just prevents that smell from leaving.

5 minutes in here my clothes smell like diesel fuel. I can't go out unless I change them.

I built a wooden frame that fits over the door frame then cut undersized holes in the plastic for intake and exhaust and added a zipper for entry.

It works better and looks better.
 
Holy freolie Biden You're getting deep into the extraction and flow of things. Sweet! I don't know if my extraction build is any use, your system looks perfect, but here it is for you.
 
Status
Not open for further replies.
Back
Top Bottom