Hello Everyone - I Need Some Help - Just Have a Look Please

Hello My Friend;) ass i said i allready bought them;)I find a good deal thats why...i dont gone use all of them....but what is the point to buy half of it for the same price??:) lol:)
My rest want be a 300 l:) but 3x50;) because there will be 3 unit in different part of flowering period, so i cant give them the same amount of nutes...and same mix....the ppm will go up with the age of plunts;) and some stuff witch i will using on the beginning i wont be using at the end:)
so is not that bad;) i would like to get some good buds;) if i have to pay at the beginnig some more to learn that :) why not;)
yes i was been doing hydro before:) my thirst grow was HYDRO:D MY DIY EBB & FLOW;)

Thx for link...a seen it before...;) like some others;) but i didnt ask anyone:) i am new here...and dont want to run after smb.;) so slowly Slowly I gone speak to everyone who got something to say about it;) heheheh:)::D:):)
 
Hello Jon705
Thx for ur help ;) I gone got couple quest aobut these lights to u:);) but i have to go now;) i will be beck later:) and off course;) ask ask ask:) hehehe
 
Cultivator said:
hi mate everything sounds fine to me, i'll send u a link of a fellow member who journalled a aero system like u describe so u can see how he set his up. he's knowledgable and will be able to help u up in the construction part as thats not my strong part, i usually get other people to build my set ups lol. On the nutes uve prob gone with the most expensive set up u can get and its not the best. Its not the worst either but AN are sneaky about all there additives when their own growers dont even use alot of them. dont get me wrong they do have some good products like bud ignitor and voodoo juice. i ran AN for a while and got decent results but the cost in hydro is ridiculous. in a 300litre res every change is like $200. if uve already bought that then go with it but it makes growing much more complex than it needs to be. im working on getting my nutes and additives to as basic as poss without being detrimental. What knowledge do u have on growing? have u gone hydro before? do u have ph meter? and a ppm/ec meter?

i'll send u the link, hit me on any nute questions u have. try keep ur water temps between 63-67f. i use an enzyme called guardian and cannazyme which allows me to run temps in low 70's, not ideal but works fine if u cant keep res cool. i dont use chillers on any of my grows. u could use h2o2 instead of enzymes or switch from week to week, both have their benefits but cant be combined.

DIY 50 site aero cloner for under $100.00

4inch PVC Aero/NFT 4x5 SCROG - 1200 Watts
Click to expand...

Hello My Friend u said i can ask obut nutrients....u said also u are using AN for a while. What kind of mix u are using?? which one u choose?? What base Nut u are using and what is the ppm level u are starting from and lovel of finishing??
what do u thinking about these 180 degrae angle sprayers from b&q( i have loots of them, use too using them for clonning and was warking well without clogging;)?? if they are not good which one u can suggest??
And couple question about nutes...u sad some different cheaper ones...what type of mix u was been talking about??
 
i use (for recirculating systems) canna aqua vega for veg, canna aqua flores for bloom. dutch pro explode boost and sometimes shooting powder (quite tricky to use properly though as very powerful), bud ignitor by AN, cannazyme and guardian enzymes and h2o2 but not mixed with enzymes. ph 5.8 through out as the aqua range have chelates in which make absorbsion of nutes easier so long as anywhere between 5.2-6.2. i start on full strength according to canna but that only brings it to ec 1.2 or 600ppm. then i'll increase up to 1000ppm or 1.6ec at the end of veg/bloom transition. my cuttings are well rooted in aerocloner so can handle full strength feeds as soon as transplanted. ive used many diff mixes of AN and right off my head i cant think exactly how i ran them, id have to check my notes. as i said they work but u can do the same or better for less cash. check out my journal bro.
 
Hello My Friend:) all thanks to you;):D
My ladies looks better;) i can see some diff;) maybe not much but they look healthier;) 3 of them they doiing rally well;)
and i am prepering for my aero:):D i just been wandering if i can use one big reservoir for both of my aero set up's...? i just realise i've got dehumidifier...which is brooken...my stupid boss left it out side and probably some electrics Fuck it up...it is working but the cotrol panel shows some wired signs...and funny digites....
anyway i will use it like a chiller:) its got some cooler inside so i can use it like a chiiler...just plug in on some thermostat and will be swichting on this unit when the temps will go up;)
 
I will My Friend i just need to do some:):P:D i will do it tmr...today is a bit late;) and i have do loots of things;) tmr;):D so;) see u soon:) then :):D I will be beck with a pic's:):):D:circle-of-love:
 
Hello Everyone;)
Like i said some pic updates;)
Thirst is the best one;) shee looks very well i all ready make some toping and FIM thech on her;)
2012-12-30_16-51-21_499.jpg


The secend one is in good condition:) ass well toping;)
2012-12-30_16-51-46_238.jpg


Now is time for this ones....they are look miserable...i take off some of the fun leaves;) and its start to produceted;)
2012-12-30_16-52-08_748.jpg
2012-12-30_16-52-25_905.jpg
2012-12-30_16-52-17_902.jpg

Last lady is look's like its gettig through this bad times...but still suffering;)
2012-12-30_16-51-54_358.jpg

And there is some klones which i taka it from the first and secend one;)
2012-12-30_16-53-07_207.jpg


And couple of Skunk#1 new grow;)
2012-12-30_16-52-40_810.jpg

2012-12-30_16-52-31_040.jpg

2012-12-30_16-51-31_008.jpg
 
i have to rebuild this unit;) i gone make on the left i gone make a space for my diy aero-veg unit;) it will be 55cm x 60cm;) i will and some pic when will be ready;) basically i would like to build a wood box 55/60 with a plywood on the top for 3" net pots, i will put lino all around(and here will be the question...what kind of paint i can use it to paint it black?? ...the button of this unit will be about 50 to 60 cm from floor. i will drill a hole for pvc pie for my sprayers...which will be in the unit...and the res...with pomp will be on the botton so i can simply change it...;) i will put some 250W MH for it;) that what i was thinking....
on the right in this unit will be my mother and clone room;) it will be 95cm x 60 cm;) i would like to have 2-4 mothers:P
there will be probably under t5...but i dodnt decide yet;)i have been thinking maybe about to make some small shefl in there and put there my aero-propagetor and mother above;) still thinking;):P
 
i definietly want to paint it;) it will be easier in future;) to clean;) and with all changing etc;)
i have been thinking about some pond paits...i know the gloss paint got lot of chemicals in it....i i have been wandering is it dont demage the roots...or change ph....or whatever. Thats why i have been thinking about these pond paints;P
 
just curious why u are rooting ur clones like that? it'll will work ofcourse but light is getting straight into res. roots dont like light and will encourage algae growth. u'll get more failures that way. aeroponics with warmish water (70-72f) in complete dark in sterile enviroment will show roots faster, drop temps to 67f wen roots show. if ur cut was clean u'll never lose a cutting.
 
Back
Top Bottom