Northern Hydro
Well-Known Member
It’s an art ! ... it took me some practice , a good starting product, essential paper, tools, and temps to retrieve the yummy goodness ....don’t get frustrated !
Grandpa Likes To Squeeze Stuff: Solventless Extracts, Rosin, Pressed Here!
- Thread starter Grandpa Tokin
- Start date
I ordered enough accessories to get me started I hope. I have been studying up and have a good supply of bud to start squishing. Grandpa makes it look so easy!
Northern Hydro
Well-Known Member
Yes, yes he does ..we all need superhero’s thou right ? Hahaha
- Thread starter
- #5,364
LOL! It becomes really easy to do once you’ve been doing it, consistently, for 5-6 years 
. The best part of growing weed, for me, is watching it ooze afterwards. Just smash that shite!
. The best part of growing weed, for me, is watching it ooze afterwards. Just smash that shite!
Gotta have priorities in life! Lol
So I am just waiting for the pump to show up. I am looking for some opinions on the fitting I need to use. The pump is a foot pedal operated by compressed air. It 3/8" npt and the hydraulic ram is 1/4" npt also putting a pressure gauge inline. Below or the two options for hooking it up I prefer option #2. With the pump hose coming from the side. My concern is that it might cause a issue where the gauge is it makes a 90 degree turn. Opposed to running the pump straight in no 90 degree bend. But that leaves the fittings And gauge sticking out the back 6 or 7 inches and a bad line of sight on the gauge. And the hose still needs to be hooked up. So it really wasted alot of space.
Option#1
Option #2
I can't really see it being a issue just wondering what everyones thoughts on this are.
Option#1
Option #2
I can't really see it being a issue just wondering what everyones thoughts on this are.
Pressure is going to be the same in all directions in every part of a vessel - in this case the hose/gauge assembly. It shouldn’t matter about turning a corner.
You’re going to have a lot of fun and there’s heaps of help here when you need a pointer.
Mine is the 10t dabpress too
Cheers
I ordered one of those dynavap arriving today hopefully the pump arrivrd today that's all I am waiting for.
A couple pics of my first squish 6gm of blue cheese.
Congrats on your first squish.
- Thread starter
- #5,371
I’d hit it!
Blazinjones
Well-Known Member
Nice i only got the 6ton myself. Ut works amazing love the thing but i also carpal tunnel in my right wrist an arthritis in my left hand lol. So its a bit of a bitch cranking tht thing sumtimes. I make sure to have some gud rosin put to the side with my bowl on the ready so i can take a hoot while im doing it an it seems to help with the pain more then if i jus do plain flowers. An since quitting narcotics i dnt wana get pills or nuthn from my doc for the pain so i can stay clean. So it makes it really gud being able to have a decent strain tht makes gud quality rosin cuz tht stuff is the ticket lol. Plus its jus really nice to get really ripped lol. But yea check this giant joint i rolled then twisted rosin around it an then rolled it in kief. I even put a big drip of rosin into the kief pile an rolled it around till i cud jus pick up the lil chunk or moon pebble i call it lol n dropped it in the tip an closed it up inside lol. I used a tad over 8 grams of bud in this thing along with a half gram of rosin. An then used 4 zig zag papers the big 1 ¼ ones that come in the orange pack lol. Me an my buddy smoked on this thing for over 2 hours lmao altho we did let it go out for about 30 40 min half way threw we got to talking an it went out an we didnt notice lmao we were so dam high haha. But yea then we realized it was like 30 min later so we fired her back up an finished her took alil over an hour to finish the last half lmao. Wen i lit it that dam moon pebble oil kief ball lit on fire an it was like the Olympic torch hahahaha. But yea it tasted so gud i cant wait till my ufo joint im rolling now gets done if i get it to work ill post sum pics
Blazinjones
Well-Known Member
LOL! It becomes really easy to do once you’ve been doing it, consistently, for 5-6 years
Omg man tht is jus rediculous lol tht looks so dam tastey congrats. I got a Gorilla Girl XL auto going rite now tht i hope turns out to be a frosty one so i can start getting some runs like this lol congrats again nice job.
It's a work of art!
@Blazinjones wow that's a killer joint nice work
Just pressed some gorillas zkittles to make capsules here are a couple pics.
Just pressed some gorillas zkittles to make capsules here are a couple pics.
Northern Hydro
Well-Known Member
Good on you, brother Blaze. That’s been too hard for too long. I’m very happy to read that.
Thank goodness for canna meds, right?!
Nice doobie btw
- Thread starter
- #5,379
Well, the day has come for Grandpa to give up growing and squishing stuff for a little while. We are in the process of moving to Florida so everything has been packed and getting ready for transport. I squished about a good zip+ so I have plenty to keep me alive for the move and drive across America.
Wish me luck! Here’s a few pictures from the last smash. I’ll stay in touch, but I need lots of pictures from you peeps so I can live vicariously thru them. Later!
View media item 1793961
Wish me luck! Here’s a few pictures from the last smash. I’ll stay in touch, but I need lots of pictures from you peeps so I can live vicariously thru them. Later!
View media item 1793961
Good luck on your trip cross country Grandpa! Sounds like a adventure.
I squished 28gm of Cali Og kush x Haze today. This stuff has been curing for well over 1.5 years. So out of 28gm I got 3.45gm of rosin back not sure if these are good results are not. This rosin is more like shatter have to heat it to do anything with it.
I squished 28gm of Cali Og kush x Haze today. This stuff has been curing for well over 1.5 years. So out of 28gm I got 3.45gm of rosin back not sure if these are good results are not. This rosin is more like shatter have to heat it to do anything with it.
Similar threads
