Got a good hybrid? If not, make three batches...indica, sativa, and 50/50!
Grandpa Likes To Squeeze Stuff: Solventless Extracts, Rosin, Pressed Here!
- Thread starter Grandpa Tokin
- Start date
gr865
Well-Known Member
For the cancer you want Indica.
It will be good for appetite and rest!
It will be good for appetite and rest!
I'm just presenting this as a starting point for you and your mom. The two of you will need to make the decisions.
This table is from CBD, A patient's Guide to Medical Cannabis:
From the table it would appear that ∆9-THCA is not an anti-cancer compound, but may help her deal with the after effects of the chemotherapy.
Rick Simpson espoused what I call 'The One Pound Cure.' Basically, a pound of a strong indica (for the day) had the cannabinoids extracted with a solvent. If we assume that 22% THC was strong for the time then from one pound of cannabis, he'd extract 100gm of THC.
His regimen looked something like this:
4 days 0.5 grain 3X daily = 6 grains
4 days 1.0 grains 3X daily = 12 grains
4 days 2.0 grains 3X daily = 24 grains
4 days 4.0 grains 3X daily = 48 grains
4 days 8.0 grains 3X daily = 96 grains
40 days 16.0 grains 3X daily = 1920 grains
Total = 2106 grains
From this we can determine that each grain of his RSO contained about 21mg THC. Using this figure, the regimen looks like this:
4 days 10.5mg THC 3X daily
4 days 21mg THC 3X daily
4 days 42mg THC 3X daily
4 days 84mg THC 3X daily
4 days 168mg THC 3X daily
40 days 336mg THC 3X daily
I put this together as I will be making an RSO equivalent with rosin. Hopefully it will get you a jump start.
This table is from CBD, A patient's Guide to Medical Cannabis:
| Phytocannabinoid | Pharmacological Effects |
| ∆9-THC ∆9-Tetrahydrocannabinol | Anti-cancer, anti-proliferative, anti- and pro-inflammatory, anti-oxidant, analgesic, anxiolytic and anxiogenic, anti-epileptic, anti-emetic (nausea and vomiting), neuroprotective, euphoriant, hedonic, sleep promoting |
| CBD Cannabidiol | Anti-cancer, anti-proliferative, anti-emetic (nausea and vomiting), anti-inflammatory, antibacterial, anti-diabetic, anti-psoriatic, anti-diarrheal, analgesic, bone stimulant, immunosuppressive, anti-ischemic, antispasmodic, vasorelaxant, neuroprotective, anti-epileptic, antipsychotic, anxiolytic, transforms white fat into brown fat, increases anandamide activation of CB1 and CB2 receptors |
| ∆9-THCV ∆9-Tetrahydrocannabivarin | Appetite suppression, bone stimulant, anti-epileptic, anti-diabetic, anti-lipidemia |
| CBG Cannabigirol | Anti-proliferative, antibacterial |
| CBC Cannabichromene | Anti-inflammatory, analgesic, bone stimulant, anti-microbial, anti-proliferative, anti-fungal |
| CBDA Cannabidiolic acid | Anti-cancer, anti-proliferative, anti-emetic (nausea and vomiting), anti-inflammatory |
| ∆9-THCA ∆9-Tetrahydrocannabinolic acid | Anti-spasmodic, anti-proliferative, analgesic, pleasure, mild euphoria, well-being, anti-emetic (nausea and vomiting), anti-inflammatory, neuroprotective |
| CBDV Cannabidivarin | Bone stimulant |
From the table it would appear that ∆9-THCA is not an anti-cancer compound, but may help her deal with the after effects of the chemotherapy.
Rick Simpson espoused what I call 'The One Pound Cure.' Basically, a pound of a strong indica (for the day) had the cannabinoids extracted with a solvent. If we assume that 22% THC was strong for the time then from one pound of cannabis, he'd extract 100gm of THC.
His regimen looked something like this:
4 days 0.5 grain 3X daily = 6 grains
4 days 1.0 grains 3X daily = 12 grains
4 days 2.0 grains 3X daily = 24 grains
4 days 4.0 grains 3X daily = 48 grains
4 days 8.0 grains 3X daily = 96 grains
40 days 16.0 grains 3X daily = 1920 grains
Total = 2106 grains
From this we can determine that each grain of his RSO contained about 21mg THC. Using this figure, the regimen looks like this:
4 days 10.5mg THC 3X daily
4 days 21mg THC 3X daily
4 days 42mg THC 3X daily
4 days 84mg THC 3X daily
4 days 168mg THC 3X daily
40 days 336mg THC 3X daily
I put this together as I will be making an RSO equivalent with rosin. Hopefully it will get you a jump start.
Rep points for that OldSalt!
Kicknitup1
Well-Known Member
Guys, Question-... it's coming. Everyone has heard the news that bootleg carts are commonly(?) cut with vitamine
E. First, god you gotta hate dumb asses that produce in MASS volume, a mixture to be turned into fumes to be breathed into your lungs and not even consider that don't know dick about chemistry. Now that I have that out of the way, the question: Is it feasible to add that stuff to bootleg shatter, wax, bho etc? Would it combine & be unnoticeable as a cutting agent? The most likely culprit would be the Butane extraction method, due to low tech setup and, well you can do it in the back yard. Because if it can be done, some are dong it. Which means the problem could much more widespread.
So, who has the tech & chemistry knowledge to say if that's doable? Another damn reason for legalization!
E. First, god you gotta hate dumb asses that produce in MASS volume, a mixture to be turned into fumes to be breathed into your lungs and not even consider that don't know dick about chemistry. Now that I have that out of the way, the question: Is it feasible to add that stuff to bootleg shatter, wax, bho etc? Would it combine & be unnoticeable as a cutting agent? The most likely culprit would be the Butane extraction method, due to low tech setup and, well you can do it in the back yard. Because if it can be done, some are dong it. Which means the problem could much more widespread.
So, who has the tech & chemistry knowledge to say if that's doable? Another damn reason for legalization!
Lewydeville
Well-Known Member
That chart is fantastic old salt thank you very much. I’m going to go through this post with my mum later. She’s a little apprehensive about taking anything as she feels so bad at the minute and worried it will make her feel worse. In hindsight I should have made something earlier so she could try before the chemo.
I'm going to re-watch the videos, and re-read the information on Rick's website, hopefully before Monday.
You may also want to consider something with a 1:1 CBD:THC ratio. The CBD can counteract the THC high. I grew Seedsman's CBD Cream and Cheese for this. It's advertised as 20% CBD / 18% THC.
You may also want to consider something with a 1:1 CBD:THC ratio. The CBD can counteract the THC high. I grew Seedsman's CBD Cream and Cheese for this. It's advertised as 20% CBD / 18% THC.
gr865
Well-Known Member
Harvest is dried and in jars curing.
26.95 zips jarred smokable buds.
Happy camper here.
26.95 zips jarred smokable buds.
Happy camper here.
Brian420pm
Well-Known Member
As Styx once sang,, "Babe I'm squishhhh- ing... the time is drawwwing near". 4 weeks to go!
Anyone else using this Dulytek press?
I finally opened it, been staring at this box since June. I sent this email to their support team, sighhhh
This thing is built like a tank... 30 pounds of steel baby. Hopefully I'll be able to work around the glitches.
Anyone else using this Dulytek press?
I finally opened it, been staring at this box since June. I sent this email to their support team, sighhhh
I just unpacked my DM1005 from order date 06/03/19 for $369.00 US dollars.
I have three things...
#1 - I need instruction how to disable the beeping when using the control panels. They are so loud they wake everyone in the house, so I’m unable to use your product.
#2 - The touchscreens on both control panels are faulty... I can touch the panel at the top and it will register a random button and is unpredictable. After awhile I can eventually get the numbers I want. Can anything be done to correct these errors?
#3 – The operating instructions for the control panels are incomplete. Something is changing the “Counter x” display, where x will sometimes increment numbers, from 0 to 4 or more, then I can’t figure out how to get back to 0 again. It seems like there can be multiple timers in succession? Please send me complete directions to access these features.
I’ve generated some interest in this press in the rosin threads at 420magazine.com. We are anxiously awaiting your response... to get your shit together! <under my breath of course>
This thing is built like a tank... 30 pounds of steel baby. Hopefully I'll be able to work around the glitches.
nobodyhere
Well-Known Member
don't get in a hurry now.As Styx once sang,, "Babe I'm squishhhh- ing... the time is drawwwing near". 4 weeks to go!
Anyone else using this Dulytek press?
I finally opened it, been staring at this box since June. I sent this email to their support team, sighhhh
I just unpacked my DM1005 from order date 06/03/19 for $369.00 US dollars.I have three things...#1 - I need instruction how to disable the beeping when using the control panels. They are so loud they wake everyone in the house, so I’m unable to use your product.#2 - The touchscreens on both control panels are faulty... I can touch the panel at the top and it will register a random button and is unpredictable. After awhile I can eventually get the numbers I want. Can anything be done to correct these errors?#3 – The operating instructions for the control panels are incomplete. Something is changing the “Counter x” display, where x will sometimes increment numbers, from 0 to 4 or more, then I can’t figure out how to get back to 0 again. It seems like there can be multiple timers in succession? Please send me complete directions to access these features.I’ve generated some interest in this press in the rosin threads at 420magazine.com. We are anxiously awaiting your response... to get your shit together! <under my breath of course>
This thing is built like a tank... 30 pounds of steel baby. Hopefully I'll be able to work around the glitches.
nobodyhere
Well-Known Member
I just pressed an eighth of some c99 from Southern Oregon Seeds. I cut this Monday. It's been burped a day+, reading 61 in a cvault. I just pulled from the larf. 160 bag at 180 for like 3min and change maybe 4 gave me some nice beige cake. While I did not tare the weighing silicon holder I did tare on a fresh one and got 24 and change for yield, almost 25.
Very nice to hit tonight, some orange and pine to it....very smooth.
Very nice to hit tonight, some orange and pine to it....very smooth.
Another lighting give away
Giixer $200 Bonus For Marijuana Grower
Hi Everyone, Here is led grow light seller, our shop link is Giixer led grow light I am glad to launch a promotion for our new grow light here that we will invite 5 marijuana growers to join. Each of them will get a free light same as above link, then we need them share experience of marijuana...
www.420magazine.com
Brian420pm
Well-Known Member
They suggested I poke out the speakers with a needle, ok that will work. They are also willing to replace the two control panels, perhaps they have new versions. I agreed and offered to pay shipping to send the old panels back.
I'd wait on giving the speakers a poke. The unit may not be returnable if you do. A better solution would be to put a resistor in series with the speaker to quiet it down, but still be audible.
I've always liked the look of the Dulytek presses, but am more than a little leery of their electronic packages.
Have you tried to Power it back down to clear the horn and screen?As Styx once sang,, "Babe I'm squishhhh- ing... the time is drawwwing near". 4 weeks to go!
Anyone else using this Dulytek press?
I finally opened it, been staring at this box since June. I sent this email to their support team, sighhhh
I just unpacked my DM1005 from order date 06/03/19 for $369.00 US dollars.I have three things...#1 - I need instruction how to disable the beeping when using the control panels. They are so loud they wake everyone in the house, so I’m unable to use your product.#2 - The touchscreens on both control panels are faulty... I can touch the panel at the top and it will register a random button and is unpredictable. After awhile I can eventually get the numbers I want. Can anything be done to correct these errors?#3 – The operating instructions for the control panels are incomplete. Something is changing the “Counter x” display, where x will sometimes increment numbers, from 0 to 4 or more, then I can’t figure out how to get back to 0 again. It seems like there can be multiple timers in succession? Please send me complete directions to access these features.I’ve generated some interest in this press in the rosin threads at 420magazine.com. We are anxiously awaiting your response... to get your shit together! <under my breath of course>
This thing is built like a tank... 30 pounds of steel baby. Hopefully I'll be able to work around the glitches.
Brian420pm
Well-Known Member
Good point!
I did!
They are sending me two new, upgraded control panels for $8, and they don't want the old ones back yay!
Hey guys, my plates are 2.5 inch x 6 inch. Can y'all recommend a good puck maker paired with bag size. I bought 2x4 bags, but not sure that is best. Also not sure if I should get the 2x4 puck maker or the circle disks I keep seeing y'all with. Also how to load the puck in bag would be super helpful. Thanks
Use the 30mm cylindrical pre-press mold with the 2" X 4" bags, or Dulytek's tube, Get the three piece mold if you haven't got one already. The bottom keeps the flower contained while you're compressing it. You can cut the bags a little below halfway down, and get two puck's worth out of them. You should be able to squish two pucks at a time with that plate size.
Thank you!
Lewydeville
Well-Known Member
Normally you get a flat piece of plastic with your bags. Slide that in a bag first, bend it to open the bag then slide the puck into position. Some thin card will do the job if you need to make one.