- Thread starter
- #2,661
It won’t take you long to get the hang of it.
Grandpa Likes To Squeeze Stuff: Solventless Extracts, Rosin, Pressed Here!
- Thread starter Grandpa Tokin
- Start date
It won’t take you long to get the hang of it.
Scrap and scratch and roll it off your paper. Fold and pinch it off your collection tool using your silicon mat. Fold the silicon mat where the rosin is touching other rosin and sticks. Pull it back fast so it stays with one side of the mat... Keep folding and using your mat as a tool to manipulate the rosin with out having to physically touch it. Also use the freezer in short 1 minute sessions to firm and stiffen it, if your having issues.
I’m high, so forgive me if that didn’t make sense.
Graciass...think I'm getting the hang of it
The return is largely dependent on your source material. The Nightingale didn't yield much, but the Crown Royale was much better.
Slow and steady wins the race. Don't try to rush it. bring the plates in to make a solid connection with the puck. Let it heat for a full minute, then slowly bring the pressure up. The pressure will drop after you get it up. Once up, keep it there until it's time to release.
Every strain, and probably every grow will press differently. You'll need to play with it to find what works best.
You don't need 10 tons to squish 7 gm.
Slow and steady wins the race. Don't try to rush it. bring the plates in to make a solid connection with the puck. Let it heat for a full minute, then slowly bring the pressure up. The pressure will drop after you get it up. Once up, keep it there until it's time to release.
Every strain, and probably every grow will press differently. You'll need to play with it to find what works best.
You don't need 10 tons to squish 7 gm.
scrogster
Well-Known Member
Good choice I have the 6ton dab Press very happy with my rosin. 10ton press you'll be rocking some good rosin and like GT said share your pics and vids.lol .Im looking at buying a press is this a good choice? Anyone using this model?
I already have a pump so it makes most sense to me as its 10ton rated the one with
a bottle jack is only rated 6tons im thinkin more power never a bad thing! 479$ Canadian plus tax 13% ouch you bastards and free shipping. Im very dab curious i like shatter but changed my mind on a BHO setup after seeing this post and a few others. Also solvent extraction not legal in canada press no prob with the law. Ive got myself talked into this unless im missing something and its junk....plz let me know. Thnx
SmokeLake
Well-Known Member
Update Ordered
10-Ton Portable Tabletop Driptech Hydraulic Heat Press Kit - No Pump - 110V
The wife doesn’t have a clue what Im buying but its on its way shes gonna be so stoked if ... ummm ... when I get caught with it. Cant wait to put the squeeze on some buds and I have several oz’s ready to go. Got an email today theres a few days delay to organize shipping so im looking at a week wait. I missed the sale promo that included a free press mould but only by a few hrs China time according to their website because i had actually started the transaction in time but hesitated for a half a day to finish it. I mentioned this when they emailed about the shipping delay so fingers crossed they help me out!!
10-Ton Portable Tabletop Driptech Hydraulic Heat Press Kit - No Pump - 110V
The wife doesn’t have a clue what Im buying but its on its way shes gonna be so stoked if ... ummm ... when I get caught with it. Cant wait to put the squeeze on some buds and I have several oz’s ready to go. Got an email today theres a few days delay to organize shipping so im looking at a week wait. I missed the sale promo that included a free press mould but only by a few hrs China time according to their website because i had actually started the transaction in time but hesitated for a half a day to finish it. I mentioned this when they emailed about the shipping delay so fingers crossed they help me out!!
Update Ordered
10-Ton Portable Tabletop Driptech Hydraulic Heat Press Kit - No Pump - 110V
The wife doesn’t have a clue what Im buying but its on its way shes gonna be so stoked if ... ummm ... when I get caught with it. Cant wait to put the squeeze on some buds and I have several oz’s ready to go. Got an email today theres a few days delay to organize shipping so im looking at a week wait. I missed the sale promo that included a free press mould but only by a few hrs China time according to their website because i had actually started the transaction in time but hesitated for a half a day to finish it. I mentioned this when they emailed about the shipping delay so fingers crossed they help me out!!
Write a review, and point them to it. I received their Dab Tool Kit for writing one.
You don't want their SS 30mm two-piece press mold. Get the aluminum three-piece if you can. It's a PITA using a clamp to pre-press the two-piece.
- Thread starter
- #2,667
Update Ordered
10-Ton Portable Tabletop Driptech Hydraulic Heat Press Kit - No Pump - 110V
The wife doesn’t have a clue what Im buying but its on its way shes gonna be so stoked if ... ummm ... when I get caught with it. Cant wait to put the squeeze on some buds and I have several oz’s ready to go. Got an email today theres a few days delay to organize shipping so im looking at a week wait. I missed the sale promo that included a free press mould but only by a few hrs China time according to their website because i had actually started the transaction in time but hesitated for a half a day to finish it. I mentioned this when they emailed about the shipping delay so fingers crossed they help me out!!
I’m sure DabPress will do you right. That’s a smashingly good choice for squishing stuff.
Like @Old Salt mentioned, do a review once you get it and they’ll send you a surprise. Woohoo! More people joining the party is always good.
- Thread starter
- #2,668
I can’t wait to squish this one:
I did some DDA the other day
Was pretty old and dry, got nada outa it
Was pretty old and dry, got nada outa it
- Thread starter
- #2,670
Pressed 7 grams of Gorilla Kush, yielded 1.6 gram. Smoothest smoking rosin I've pressed yet. Very floral tasting.
- Thread starter
- #2,672
Yummy!
gr865
Well-Known Member
@ Marzbadrock
I'd hit it!
Good job.
I'd hit it!
Good job.
Can't complain with those returns Marz!
sounds delicious.- Thread starter
- #2,675
I’m in need of a squeeze. My back is killing me...again. 
Between your back and your missing tomatoes, a good squeeze is just what the doctor ordered!
For u Gramps
Alaskan Purple....not bad
Alaskan Purple....not bad
nobodyhere
Well-Known Member
Nice color....Pressed 7 grams of Gorilla Kush, yielded 1.6 gram. Smoothest smoking rosin I've pressed yet. Very floral tasting.
- Thread starter
- #2,679
You know I’d hit it! 3 times!
gr865
Well-Known Member
What a great 72nd Bday weeks, I say weeks because we went to the hills the week before my Bday, the this week after my Bday we went to the coast.
I actually spent my Bday alone, it was great. My GF left at around 10 AM and I mowed my yard and my lot next to my place. Damn weed eater died again so did not get that done.
That evening I baked me up some chicken thighs with fresh roasted asparagus and onion, and roasted sweet potato. Made me a large pitcher of my (3/2/0.25) prickly pear frozen margaritas. Then spent the rest of my evening enjoying G13 Haze Rosin in a brand new Ceramic Donut Coil. Ahhhh, how clean tasting and I got way ripped! Let's say I Hit It!!!
I actually spent my Bday alone, it was great. My GF left at around 10 AM and I mowed my yard and my lot next to my place. Damn weed eater died again so did not get that done.
That evening I baked me up some chicken thighs with fresh roasted asparagus and onion, and roasted sweet potato. Made me a large pitcher of my (3/2/0.25) prickly pear frozen margaritas. Then spent the rest of my evening enjoying G13 Haze Rosin in a brand new Ceramic Donut Coil. Ahhhh, how clean tasting and I got way ripped! Let's say I Hit It!!!
Similar threads
