First Grow Join Me In This Adventure! Week 1 Flower

I do have it pretty high right now, I know your supposed to keep it between 12 to 24 inches right? I felt like the light was to much because of the plant on the left. the way the leafs are. self diagnosing maybe wrong?
You’re in flower... check with the manufacturer. Mine calls for 24-36 and it’s a 1500w blurple.
 
Hey comfortably dumb.
Congratulations on having your first son :thumb:
You plants are looking great.
What nutes are you feeding them?
You say you are using your fan to draw air into your tent and have a vent open for extraction.
This is fine so long as no light is getting into your tent through the open vent, ideally you should have some ducting with a couple of bends to stop light getting in.
For pictures you should be able to turn your light off at the actual light which shouldn't mess with your timer.
 
What two of then look like outside of the tent
 

Attachments

  • 20200528_104420.jpg
    20200528_104420.jpg
    1.9 MB · Views: 54
Thank you ! I ran into a issue on gonna have to keep a very close eye on I've ran into mold issues I've cut the leafs off I've seen so far but in afraid it still spread does anyone know how to control this I dont really have humidity issues it stays it around 50 percent humidity besides one day it rained real bad shot up to like 81
 

Attachments

  • 20200530_105022.jpg
    20200530_105022.jpg
    742.4 KB · Views: 54
  • 20200530_105010.jpg
    20200530_105010.jpg
    663 KB · Views: 50
  • 20200530_105016.jpg
    20200530_105016.jpg
    658.4 KB · Views: 50
Hey man, just caught up, your plants are looking good.

You shouldn't have burned your plants with an led light at 24"
I can get my LEDs down to about 8" in flower.
Maybe try lowering it a little bit at a time to get them used to it.

I'm afraid I've got no advice for powdery mildew as I've not run into it.
 
Hey man, just caught up, your plants are looking good.

You shouldn't have burned your plants with an led light at 24"
I can get my LEDs down to about 8" in flower.
Maybe try lowering it a little bit at a time to get them used to it.

I'm afraid I've got no advice for powdery mildew as I've not run into it.
Thank you! I'll try that to see if it works better! And I'm still a beginner when it comes to the ventilation system I'm thinking bringing the air from the air vent might be the cause for I've had no issues my first two months so I'm tryna back track and see what I did wrong
 

Attachments

  • received_275285083621548.jpeg
    received_275285083621548.jpeg
    858.8 KB · Views: 47
  • received_565244004186071.jpeg
    received_565244004186071.jpeg
    978.2 KB · Views: 52
  • received_867382410407933.jpeg
    received_867382410407933.jpeg
    918.3 KB · Views: 47
  • received_683197592236727.jpeg
    received_683197592236727.jpeg
    1 MB · Views: 53
Thank you! I'll try that to see if it works better! And I'm still a beginner when it comes to the ventilation system I'm thinking bringing the air from the air vent might be the cause for I've had no issues my first two months so I'm tryna back track and see what I did wrong
You really want air flowing through your tent.
It could be coming from where you are drawing the air into your tent.
Might be worth moving your intake if you can.

Do you have any fans inside the tent blowing on the plants?
 
I dont know anything about Powder mildew (Thankfully). Just make sure your humidity is down and you have great air flow throught your setup. You need a fan osculating and also air being pulled/pushed into your space and also out your space. Do you have pictures of the Mold? I have yet to see any in your pics.
 
I dont know anything about Powder mildew (Thankfully). Just make sure your humidity is down and you have great air flow throught your setup. You need a fan osculating and also air being pulled/pushed into your space and also out your space. Do you have pictures of the Mold? I have yet to see any in your pics.
I'll have to take some pictures it's only leafs here and there was on four to five on one of my plants I will try moving my inline fan also I only have 1 and I'm reversing it pushing air into the tent through the bottom and letting air come out the top through vent hole covered
 
Back
Top Bottom